Roadmap to distillery spent wash treatment and use of soft computing techniques

Author(s):  
Siddalingayya G. Hiremath ◽  
Sadanand G. Joshi
2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
N. B. Raut ◽  
Dinesh Kumar Saini ◽  
G. B. Shinde

Soft computing techniques are very much needed to design the environmental related systems these days. Soft computing (SC) is a set of computational methods that attempt to determine satisfactory approximate solutions to find a model for real-world problems. Techniques such as artificial neural networks, fuzzy logic, and genetic algorithms can be used in solving complex environmental problems. Self-organizing feature map (SOFM) model is proposed in monitoring and collecting of the data that are real time and static datasets acquired through pollution monitoring sensors and stations in the distilleries. In the environmental monitoring systems the ultimate requirement is to establish controls for the sensor based data acquisition systems and needs interactive and dynamic reporting services. SOFM techniques are used for data analysis and processing. The processed data is used for control system which even feeds to the treatment systems. Cocos nucifera activated carbon commonly known as coconut shell activated carbon (CSC) was utilized for the treatment of distillery spent wash. Batch and column studies were done to investigate the kinetics and effect of operating parameter on the rate of adsorption. Since the quantum of spent water generated from the sugar industry allied distillery units is huge, this low cost adsorbent is found to be an attractive economic option. Equilibrium adsorption date was generated to plot Langmuir and Tempkin adsorption isotherm. The investigation reveals that though with lower adsorption capacities CSC seems to be technically feasible solution for treating sugar distillery spent. Efforts are made in this paper to build informatics for derived activated carbon for solving the problem of treatment of distillery spent wash. Capsule. Coconut shell derived activated carbon was synthesized, characterized, and successfully employed as a low cost adsorbent for treatment of distillery spent wash.


Author(s):  
N. Golub ◽  
M. Potapova ◽  
M. Shinkarchuk ◽  
O. Kozlovets

The paper deals with the waste disposal problem of the alcohol industry caused by the widespread use of alcohol as biofuels. In the technology for the production of alcohol from cereal crops, a distillery spent wash (DSW) is formed (per 1 dm3 of alcohol – 10–20 dm3 DSW), which refers to highly concentrated wastewater, the COD value reaches 40 g O2/dm3. Since the existing physical and chemical methods of its processing are not cost-effective, the researchers develop the processing technologies for its utilization, for example, an anaerobic digestion. Apart from the purification of highly concentrated wastewater, the advantage of this method is the production of biogas and highquality fertilizer. The problems of biotechnology for biogas production from the distillery spent wash are its high acidity–pH 3.7–5.0 (the optimum pH value for the methanogenesis process is 6.8–7.4) and low nitrogen content, the lack of which inhibits the development of the association of microorganisms. In order to solve these problems, additional raw materials of various origins (chemical compounds, spent anaerobic sludge, waste from livestock farms, etc.) are used. The purpose of this work is to determine the appropriate ratio of the fermentable mixture components: cosubstrate, distillery spent wash and wastewater of the plant for co-fermentation to produce an energy carrier (biogas) and effective wastewater treatment of the distillery. In order to ensure the optimal pH for methanogenesis, poultry manure has been used as a co-substrate. The co-fermentation process of DSW with manure has been carried out at dry matter ratios of 1:1, 1:3, 1:5, 1:7 respectively. It is found that when the concentration of manure in the mixture is insufficient (DSW/manure – 1:1, 1:3), the pH value decreases during fermentation which negatively affects methane formation; when the concentration of manure in the mixture is increased (DSW/manure – 1:5, 1:7), the process is characterized by a high yield of biogas and methane content. The maximum output of biogas with a methane concentration of 70 ± 2% is observed at the ratio of components on a dry matter “wastewater: DSW: manure” – 0,2:1:7 respectively. The COD reduction reaches a 70% when using co-fermentation with the combination of components “wastewater: DSW: manure” (0,3:1:5) respectively.


2015 ◽  
Vol 81 (5-8) ◽  
pp. 771-778 ◽  
Author(s):  
Pascual Noradino Montes Dorantes ◽  
Marco Aurelio Jiménez Gómez ◽  
Gerardo Maximiliano Méndez ◽  
Juan Pablo Nieto González ◽  
Jesús de la Rosa Elizondo

Author(s):  
Binoy B Nair ◽  
S Silamparasu ◽  
R Mohnish ◽  
T S Deepak ◽  
M Rahul

Sign in / Sign up

Export Citation Format

Share Document