scholarly journals Enhanced oil recovery mechanism of low oxygen air injection in high water cut reservoir

2017 ◽  
Vol 8 (3) ◽  
pp. 917-923 ◽  
Author(s):  
Hu Jia ◽  
Shu-Pin Yin ◽  
Xian-Ping Ma
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Water ◽  
Air Injection ◽  
Low Oxygen ◽  
Recovery Mechanism ◽  
High Water Cut ◽  
Water Cut

scholarly journals Effect of Emulsification on Enhanced Oil Recovery during Surfactant/Polymer Flooding in the Homogeneous and Heterogeneous Porous Media

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Xiaoyan Wang ◽  
Jie Zhang ◽  
Guangyu Yuan ◽  
Wei Wang ◽  
Yanbin Liang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Water ◽  
Heterogeneous Porous Media ◽  
Recovery Factor ◽  
Water Flooding ◽  
Core Flooding ◽  
Positive Role ◽  
High Water Cut ◽  
Water Cut

Surfactant polymer (SP) flooding has become an important enhanced oil recovery (EOR) technique for the high-water cut mature oilfield. Emulsification in the SP flooding process is regarded as a powerful mark for the successful application of SP flooding in the filed scale. People believe emulsification plays a positive role in EOR. This paper uses one-dimensional homogenous core flooding experiments and parallel core flooding experiments to examine the effect of emulsification on the oil recoveries in the SP flooding process. 0.3 pore volume (PV) of emulsions which are prepared using ultralow interface intension (IFT) SP solution and crude oil with stirring method was injected into core models to mimic the emulsification process in SP flooding, followed by 0.35 PV of SP flooding to flood emulsions and remaining oil. The other experiment was preformed 0.65 PV of SP flooding as a contrast. We found SP flooding can obviously enhance oil recovery factor by 25% after water flooding in both homogeneous and heterogeneous cores. Compared to SP flooding, emulsification can contribute an additional recovery factor of 3.8% in parallel core flooding experiments. But there is no difference on recoveries in homogenous core flooding experiments. It indicates that the role of emulsification during SP flooding will be more significant for oil recoveries in a heterogeneous reservoir rather than a homogeneous reservoir.

scholarly journals Screening and assessing the conditions for effective oil recovery enhancing techniques application for hard to recover high-water cut reserves

2021 ◽  
pp. 48-56
Author(s):  
V. V. Mukhametshin ◽  
◽  
R. N. Bakhtizin ◽  
L. S. Kuleshova ◽  
A. P. Stabinskas ◽  
...  
Keyword(s):  
Numerical Modeling ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Oil And Gas ◽  
Chemical Properties ◽  
High Water ◽  
Recovery Techniques ◽  
High Water Cut ◽  
Water Cut ◽  
Criterion Analysis

For the conditions of deposits in Jurassic and Paleozoic terrigenous reservoirs of the Sherkalinsky trough and Shaimsky swell of Western Siberia, a criterion analysis and screening of enhanced oil recovery techniques used in the fields of the West Siberian oil and gas province were carried out. For various groups of oil fields, a set of the most effective technologies for the development of residual hard-to-recover reserves of flooded fields has been proposed. The areas for effective application of the selected techniques for deposits introduced into development within the considered tectonic-stratigraphic elements are determined. The areas determination was carried out on the basis of 19 parameters characterizing the geological-physical and physical-chemical properties of formations and fluids, as well as the maximum and minimum values of the canonical discriminant functions determined by the situational map. Based on the numerical modeling of oil recovery processes, a forecast of an increase in the final oil recovery factor was made for five facilities-field test sites of the selected groups of facilities. Keywords: hard-to-recover reserves; terrigenous reservoirs; factor analysis; enhanced oil recovery techniques; numerical modeling; criterion analysis.

scholarly journals Mechanism of Enhanced Oil Recovery for In-Depth Profile Control and Cyclic Waterflooding in Fractured Low-Permeability Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Daiyin Yin ◽  
Wei Zhou
Keyword(s):  
Enhanced Oil Recovery ◽  
Depth Profile ◽  
Oil Recovery ◽  
Water Injection ◽  
High Water ◽  
Low Permeability ◽  
Profile Control ◽  
High Water Cut ◽  
Water Cut ◽  
Low Permeability Reservoirs

When fractured low-permeability reservoirs enter a high water cut period, injected water always flows along fractures, water cut speeds increase rapidly, and oil production decreases quickly in oil wells. It is difficult to further improve the oil recovery of such fractured low-permeability reservoirs. In this paper, based on the advantages of in-depth profile control and cyclic water injection, the feasibility of combining deep profile control with cyclic water injection to improve oil recovery in fractured low-permeability reservoirs during the high water cut stage was studied, and the mechanisms of in-depth profile control and cyclic waterflooding were investigated. According to the characteristics of reservoirs in Zone X, as well as the fracture features and evolution mechanisms of the well network, an outcrop plate fractured core model that considers fracture direction was developed, and core displacement experiments were carried out by using the HPAM/Cr3+ gel in-depth profile control system. The enhanced oil recovery of waterflooding, cyclic water injection, and in-depth profile control, as well as a combination of in-depth profile control and cyclic water injection, was investigated. Moreover, variations in the water cut degree, reserve recovery percentage, injection pressure, fracture and matrix pressure, and water saturation were monitored. On this basis, the mechanism of enhanced oil recovery based on the combined utilization of in-depth profile control and cyclic waterflooding methods was analyzed. The results show that in-depth profile control and cyclic water injection can be synchronized to further increase oil recovery. The recovery ratio under the combination of in-depth profile control and cyclic water injection was 1.9% higher than that under the in-depth profile control and 5.6% higher than that under cyclic water injection. The combination of in-depth profile control and cyclic water injection can increase the reservoir pressure; therefore, the fluctuation of pressure between the matrix and its fractures increases, more crude oil flows into the fracture, and the oil production increases.

scholarly journals Microscopic Determination of Remaining Oil Distribution in Sandstones With Different Permeability Scales Using Computed Tomography Scanning

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
Yongfei Yang ◽  
Haiyuan Yang ◽  
Liu Tao ◽  
Jun Yao ◽  
Wendong Wang ◽  
...  
Keyword(s):  
Distribution Pattern ◽  
Oil Recovery ◽  
Distribution Patterns ◽  
High Water ◽  
Water Flooding ◽  
Oil Distribution ◽  
Computed Tomography Scanning ◽  
Remaining Oil ◽  
High Water Cut ◽  
Water Cut

To investigate the characteristics of oil distribution in porous media systems during a high water cut stage, sandstones with different permeability scales of 53.63 × 10−3 μm2 and 108.11 × 10−3 μm2 were imaged under a resolution of 4.12 μm during a water flooding process using X-ray tomography. Based on the cluster-size distribution of oil segmented from the tomography images and through classification using the shape factor and Euler number, the transformation of the oil distribution pattern in different injection stages was studied for samples with different pore structures. In general, the distribution patterns of an oil cluster continuously change during water injection. Large connected oil clusters break off into smaller segments. The sandstone with a higher permeability (108.11 × 10−3 μm2) shows the larger change in distribution pattern, and the remaining oil is trapped in the pores with a radius of approximately 7–12 μm. Meanwhile, some disconnected clusters merge together and lead to a re-connection during the high water cut period. However, the pore structure becomes compact and complex, the residual nonwetting phase becomes static and is difficult to move; and thus, all distribution patterns coexist during the entire displacement process and mainly distribute in pores with a radius of 8–12 μm. For the pore-scale entrapment characteristics of the oil phase during a high water cut period, different enhance oil recovery (EOR) methods should be considered in sandstones correspondent to each permeability scale.

scholarly journals A Novel Assisted Gas–Oil Countercurrent EOR Technique for Attic Oil in Fault-Block Reservoirs

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 402
Author(s):  
Kang Ma ◽  
Hanqiao Jiang ◽  
Junjian Li ◽  
Rongda Zhang ◽  
Kangqi Shen ◽  
...  
Keyword(s):  
Production Process ◽  
Oil Recovery ◽  
Production Efficiency ◽  
High Water ◽  
Gas Oil ◽  
Fault Block ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Gas Channeling ◽  
Water Cut

As the mature oil fields have stepped into the high water cut stage, the remaining oil is considered as potential reserves, especially the attic oil in the inclined fault-block reservoirs. A novel assisted gas–oil countercurrent technique utilizing gas oil countercurrent (GOC) and water flooding assistance (WFA) is proposed in this study to enhance the remaining oil recovery in sealed fault-block reservoirs. WFA is applied in our model to accelerate the countercurrent process and inhibit the gas channeling during the production process. Four comparative experiments are conducted to illustrate enhanced oil recovery (EOR) mechanisms and compare the production efficiency of assisted GOC under different assistance conditions. The results show that WFA has different functions at different stages of the development process. In the gas injection process, WFA forces the injected gas to migrate upward and shortens the shut-in time by approximately 50% and the production efficiency improves accordingly. Compared with the basic GOC process, the attic oil swept area is extended 60% at the same shut-in time condition and secondary gas cap forms under the influence of WFA. At the production stage, the WFA and secondary gas cap expansion form the bi-directional flooding. The bi-directional flooding also displaces the bypassed oil and replaced attic oil located below the production well, which cannot be swept by the gas cap expansion. WFA inhibits the gas channeling effectively and increases the sweep factor by 26.14% in the production stage. The oil production increases nearly nine times compared with the basic GOC production process. The proposed technique is significant for the development of attic oil in the mature oil field at the high water cut stage.

Study on Technical Limits of Single-Pipe Concatenation Gathering Process during High Water-Cut Stage

2013 ◽  
Vol 295-298 ◽  
pp. 3323-3327
Author(s):  
Li Xin Wei ◽  
Xin Peng Le ◽  
Yun Xia Fu ◽  
Zhi Hua Wang ◽  
Yu Wang
Keyword(s):  
Oil Recovery ◽  
High Water ◽  
Temperature Limit ◽  
Tertiary Oil Recovery ◽  
Recovery Technique ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Single Pipe ◽  
Oil Gas

In order to optimize the gathering system and reduce the energy consumption in the production, single-pipe concatenation process has been widely used after the tertiary oil recovery technique is applied and development enters into high water cut stage in the oilfield. Aiming at condensate oil in gathering pipeline and obvious increase of the high circle pressure wells in the operation of the process, the adaption relationship between oil gathering pipeline size and flow, as well as the temperature limit of the gathering system start are studied, through the hydraulic and thermodynamic calculations of oil-gas-water multiphase flow. It has directive function for making effective schemes to solve the production problems caused by the high back pressure of wells.

scholarly journals Dual Completion Petroleum Production Engineering for Several Oil Formations

2018 ◽  
Vol 26 (4) ◽  
pp. 217-221
Author(s):  
Tanyana Nikolaevna Ivanova ◽  
Aleksandr Ivanovich Korshunov ◽  
Vladimir Pavlovich Koretckiy
Keyword(s):  
Production Technology ◽  
Oil Recovery ◽  
Late Stage ◽  
Recovery Rate ◽  
High Water ◽  
Production Engineering ◽  
Petroleum Production ◽  
Cost Efficient ◽  
High Water Cut ◽  
Water Cut

Abstract Cost-efficient, enabling technologies for keeping and increasing the reservoir recovery rate of oil-formations with high water cut of produced fluids and exhausted resource are really essential. One of the easiest but short-term ways to increase oil production and incomes at development of oil deposits is cost of development and capital cost reduction. Therefore, optimal choice and proper feasibility study on the facilities for multilayer oil fields development, especially at the late stage of reservoir working, is a crucial issue for now-day oil industry. Currently, the main oil pools do not reach the design point of coefficient of oil recovery. The basic feature of the late stage of reservoir working is the progressing man-made impact on productive reservoir because of water injection increasing for maintaining reservoir pressure. Hence cost-efficient, enabling technologies for keeping and increasing the reservoir recovery rate of oil-formations with high water cut of produced fluids and exhausted resource are really essential. To address the above concerns the dual completion petroleum production engineering was proposed. The intensity of dual completion of formation with of different permeability is determined by rational choice of each of them. The neglect of this principle results a disproportionately rate of highly permeable formations development for the time. In effect the permeability of the formations or their flow rate is decreasing. The problem is aggravated by lack of awareness of mechanics of layers' mutual interference in producers and injectors. Dual completion experience in Russian has shown, that success and efficiency of the technology in many respects depend on engineering support. One of the sufficient criteria for the choice of operational objects should be maximal involvement of oil-saturated layers by oil displacement from seams over the economic life of well producing oil. If it is about getting high rate of oil recovery for irregular formations there is no alternative to dual completion and production. The recommended dual completion petroleum production technology enables development several formations by single well at the time. The dual completion petroleum production technology has been more important than ever because it is right not only for formations but for thin layers with undeveloped remaining reserves.

Sign in / Sign up

Export Citation Format

Share Document