Error analysis and compensation of cycloid gear form grinding based on multi-body system error topology theory

2021 ◽  
Vol 44 (1) ◽  
Author(s):  
JianXin Su ◽  
Chuang Jiang ◽  
Hao Zhang ◽  
Shaowu Nie
Keyword(s):  
Error Analysis ◽  
Body System ◽  
System Error ◽  
Form Grinding ◽  
Multi Body

Spatial Error Modeling and Analysis of the Glass Fillet Machine Based on the Multi-Body System Theory

2014 ◽  
Vol 988 ◽  
pp. 324-327
Author(s):  
Shui Ping Li ◽  
Qian Qiu ◽  
Ya Li Yuan
Keyword(s):  
Error Analysis ◽  
Error Modeling ◽  
Grinding Wheel ◽  
Body System ◽  
Machining Error ◽  
Spatial Error ◽  
Modeling And Analysis ◽  
Space Error ◽  
Multi Body ◽  
The Relationship

Research on spatial error modeling of the glass fillet machine is introduced based on the basic principles of multi-body system kinematics. Firstly, the topological structure and the low-order body arrays are described on the basis of the mechanical structure. Then, the spatial error analysis is carried out based on the theory of multi-body system. At the same time, the transformation matrix between the adjacent typical bodies is written. After that, in order to illustrate the relationship between the grinding wheel and the grinding point, the space error model of the glass fillet machine is established, which explains the effect of spatial structure on machining error and the calculation method of machining error. This model is easy to analyze the error and embodies the superiority on the error analysis and correction. Thus it provides a kind of ideal technique for the precision analysis of the glass fillet machine.

Dynamic Performance of High-Speed Electric Multiple Unit within Multi-Body System Simulation

2019 ◽  
Vol 12 (4) ◽  
pp. 339-349
Author(s):  
Junguo Wang ◽  
Daoping Gong ◽  
Rui Sun ◽  
Yongxiang Zhao
Keyword(s):  
High Speed ◽  
Rapid Development ◽  
Dynamic Performance ◽  
Body System ◽  
High Speed Railway ◽  
Evaluation Indexes ◽  
Actual Operation ◽  
Multiple Unit ◽  
The Stability ◽  
Multi Body

Background: With the rapid development of the high-speed railway, the dynamic performance such as running stability and safety of the high-speed train is increasingly important. This paper focuses on the dynamic performance of high-speed Electric Multiple Unit (EMU), especially the dynamic characteristics of the bogie frame and car body. Various patents have been discussed in this article. Objective: To develop the Multi-Body System (MBS) model of EMU, verify whether the dynamic performance meets the actual operation requirements, and provide some useful information for dynamics and structural design of the proposed EMU. Methods: According to the technical characteristics of a typical EMU, a MBS model is established via SIMPACK, and the measured data of China high-speed railway is taken as the excitation of track random irregularity. To test the dynamic performance of the EMU, including the stability and safety, some evaluation indexes such as wheel-axle lateral forces, wheel-axle lateral vertical forces, derailment coefficients and wheel unloading rates are also calculated and analyzed in detail. Results: The MBS model of EMU has better dynamic performance especially curving performance, and some evaluation indexes of the stability and safety have also reached China’s high-speed railway standards. Conclusion: The effectiveness of the proposed MBS model is verified, and the dynamic performance of the MBS model can meet the design requirements of high-speed EMU.

scholarly journals Impact of Increased Travel Speed of a Transportation Set on the Dynamic Parameters of a Mine Suspended Monorail

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1528
Author(s):  
Kamil Szewerda ◽  
Jarosław Tokarczyk ◽  
Andrzej Wieczorek
Keyword(s):  
Computational Model ◽  
Travel Speed ◽  
Body System ◽  
Emergency Braking ◽  
System Method ◽  
Underground Coal Mines ◽  
Program Environment ◽  
Underground Transportation ◽  
Multi Body ◽  
Transportation Routes

The method of increasing the efficiency of using one of the most common means of auxiliary transport in underground coal mines—suspended monorails—is presented. Increase of velocity is one of the key parameters to improve the efficiency and economical effect related with the underground auxiliary transport. On the other hand, increasing the velocity results in bigger value of force acting on the suspended monorail route and its suspensions. The most important issue during increasing the velocity is ensuring the required safety for the passengers and not overloading the infrastructure. In order to analyze how increasing velocity influences the level of loads of the route suspension and the steel arch loads, the computational model of suspended monorail was developed. The computational model included both the physical part (embedded in the program environment based on the Multi-Body System method) and the components of the monorail control system. Two independent software environments were cooperating with each other through the so-called co-simulation. This model was validated on the base of results obtained on the test stand. Then, the numerical simulations of emergency braking with different values of velocity were conducted, which was not possible with the use of physical objects. The presented study can be used by the suspended monorail’s producers during the designing process, and leads to increase the safety on underground transportation routes.

Kinematics and Dynamics Simulation Research for Roller Coaster Multi-Body System

2011 ◽  
Vol 421 ◽  
pp. 276-280 ◽  
Author(s):  
Ge Ning Xu ◽  
Hu Jun Xin ◽  
Feng Yi Lu ◽  
Ming Liang Yang
Keyword(s):  
Structural Design ◽  
3D Model ◽  
Structure Design ◽  
Dynamics Simulation ◽  
Body System ◽  
Load Spectrum ◽  
Roller Coaster ◽  
Simulation Research ◽  
Calculation Results ◽  
Multi Body

To assess the roller coaster multi-body system security, it is need to extract the running process of kinematics, dynamics, load spectrum and other features, as basis dates of the roller coaster structural design. Based on Solidworks/motion software and in the 3D model, the calculation formula of the carrying car velocity and acceleration is derived, and the five risk points of the roller coaster track section are found by simulation in the running, and the simulation results of roller coaster axle mass center velocity are compared with theoretical calculation results, which error is less than 4.1%, indicating that the calculation and simulation have a good fit and providing the evidence for the roller coaster structure design analysis.

Sensitivity Analysis of Geometric Errors for Five-Axis CNC Machine Tool Based on Multi-Body System Theory

2012 ◽  
Vol 271-272 ◽  
pp. 493-497
Author(s):  
Wei Qing Wang ◽  
Huan Qin Wu
Keyword(s):  
System Theory ◽  
Sensitivity Analysis ◽  
Machine Tool ◽  
Geometric Error ◽  
Machining Accuracy ◽  
Geometric Errors ◽  
Body System ◽  
Cnc Machine ◽  
Multi Body ◽  
Five Axis

Abstract: In order to determine that the effect of geometric error to the machining accuracy is an important premise for the error compensation, a sensitivity analysis method of geometric error is presented based on multi-body system theory in this paper. An accuracy model of five-axis machine tool is established based on multi-body system theory, and with 37 geometric errors obtained through experimental verification, key error sources affecting the machining accuracy are finally identified by sensitivity analysis. The analysis result shows that the presented method can identify the important geometric errors having large influence on volumetric error of machine tool and is of help to improve the accuracy of machine tool economically.

With the Backlash Dynamics Simulation of a Crank-Slider Mechanism of the Internal Combustion Engine

2012 ◽  
Vol 215-216 ◽  
pp. 1081-1084
Author(s):  
Shao Jun Bo ◽  
Kui Ji ◽  
Juan Tian
Keyword(s):  
System Dynamics ◽  
Combustion Engine ◽  
Dynamics Simulation ◽  
Kinematic Pair ◽  
Body System ◽  
Nonlinear Characteristics ◽  
Preliminary Study ◽  
Multi Body ◽  
Dynamics Models ◽  
Crank Mechanism

On the basis of flexible multi-body system dynamics theory, we built flexible multi-body system dynamics models which include a backlash, and to a slider-crank mechanism as the research object, we made a preliminary study on the effect on the flexible components and the backlash of the kinematic pair on mechanical system dynamics characteristics. To consider the backlash of the kinematic pair and component of flexible space can show a preliminary research on the dynamic simulation, and focus on the backlash, friction and gravity field to influence in the dynamic characteristics of the system. The simulation results show that, due to the existence of backlash made the two components frequent collision in the process of the stretching, clearance, flexible and friction are closed, make the system nonlinear characteristics increased.

Sign in / Sign up

Export Citation Format

Share Document