Study on the hydrodynamics of carangiform swimming in a narrow channel

Author(s):  
Ou Xie ◽  
Aiguo Song ◽  
Qixin Zhu ◽  
Yehu Shen
Author(s):  
Harsha S. Nagarajarao ◽  
Chandra P. Ojha ◽  
Archana Kedar ◽  
Debabrata Mukherjee

: Cryptogenic stroke and its relation to the Patent Foramen Ovale (PFO) is a long-debated topic. Recent clinical trials have unequivocally established the relationship between cryptogenic strokes and paradoxical embolism across the PFO. This slit-like communication exists in everyone before birth, but most often closes shortly after birth. PFO may persist as a narrow channel of communication between the right and left atria in approximately 25-27% of adults. : In this review, we examine the clinical relevance of the PFO with analysis of the latest trials evaluating catheter-based closure of PFO’s for cryptogenic stroke. We also review the current evidence examining the use of antiplatelet medications versus anticoagulants for stroke prevention in those patients with PFO who do not qualify for closure per current guidelines.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Hiroyuki Ikemoto ◽  
Takafumi Miyanaga

AbstractIn this review, we make a survey of the structure studies for the chalcogen elements and several chalcogenides in liquid, amorphous and nanosized state by using X-ray absorption fine structure (XAFS). The chalcogen elements have hierarchic structures; the chain structure constructed with the strong covalent bond as a primary structure, and the weaker interaction between chains as a secondary one. Existence of these two kinds of interactions induces exotic behaviors in the liquid, amorphous and nanosized state of the chalcogen and chalcogenides. XAFS is a powerful structure analysis technique for multi-element systems and the disordered materials, so it is suitable for the study of such as liquid, amorphous and nanosized mixtures. In section 2, the structures for the liquid state are discussed, which show the interesting semiconductor-metal transition depending on their temperatures and components. In section 3, the structure for the amorphous states are discussed. Especially, some of chalcogens and chalcogenides present the photostructural change, which is important industrial application. In section 4, the structures of nanosized state, nanoparticles and isolated chain confined into the narrow channel, are discussed. The studies of the nanoparticle and the isolated chain reveal the alternative role between the intrachain covalent bonds and the interchain interaction.


1989 ◽  
Vol 36 (11) ◽  
pp. 2622-2623 ◽  
Author(s):  
N. Yamauchi ◽  
J.-J.J. Hajjar ◽  
R. Reif ◽  
K. Nakazawa ◽  
K. Tanaka

2004 ◽  
Vol 31 (3) ◽  
pp. 478-486 ◽  
Author(s):  
Troy Matsuura ◽  
Ronald Townsend

Phase 1 of an ongoing laboratory study of a novel form of stream-bank protection structure is described. "Barbs" are dike-like stone structures designed to protect the (usually unstable) outside-bank regions of channel bends. These low-profile structures point upstream into the flow and typically extend to about 1/4-way across the channel. By disrupting near-bank velocity gradients they promote sediment deposition along the eroding outside-bank region. Their presence also modifies the "helicoidal"-type flow pattern of the bend such that secondary currents, which would otherwise attack the outside-bank, are redirected towards the center of the channel. This novel form of bank protection structure is currently undergoing field tests on selected bends on a number of shallow "wide" streams in Illinois, USA. While initial results are encouraging, additional studies are necessary to develop design criteria for their wider application. In phase 1 of this study, the effectiveness of different arrangements of barb groups, in both 90° and 135° moveable-bed bend sections of a hydraulically "narrow" rectangular channel, are investigated. For each hydraulic condition considered, the channel-bed scour profiles generated by the different barb groups are compared to corresponding "reference" profiles generated in the absence of barbs. Judging the effectiveness of the different barb groups in promoting long-term stability of the outside-bank region is based on two criteria: (i) percent reduction achieved in scouring in the vicinity of the outside-bank and (ii) degree to which the channel thalweg (deepest portion) is moved from the outside-bank region towards the center of the channel.Key words: barb, channel bends, local scouring, bank erosion, bank protection, secondary currents.


Author(s):  
Arif B. Ozer ◽  
Donald K. Hollingsworth ◽  
Larry. C. Witte

A quenching/diffusion analytical model has been developed for predicting the wall temperature and wall heat flux behind bubbles sliding in a confined narrow channel. The model is based on the concept of a well-mixed liquid region that enhances the heat transfer near the heated wall behind the bubble. Heat transfer in the liquid is treated as a one-dimensional transient conduction process until the flow field recovers back to its undisturbed level prior to bubble passage. The model is compared to experimental heat transfer results obtained in a high-aspect-ratio (1.2×23mm) rectangular, horizontal channel with one wide wall forming a uniform-heat-generation boundary and the other designed for optical access to the flow field. The working fluid was Novec™ 649. A thermochromic liquid crystal coating was applied to the outside of the uniform-heat-generation boundary, so that wall temperature variations could be obtained and heat transfer coefficients and Nusselt numbers could be obtained. The experiments were focused on high inlet subcooling, typically 15–50°C. The model is able to capture the elevated heat transfer rates measured in the channel without the need to consider nucleate boiling from the surface or microlayer evaporation from the sliding bubbles. Surface temperatures and wall heat fluxes were estimated for 17 different experimental conditions using the proposed model. Results agreed with the measured values within ±15% accuracy. The insight gathered from comparing the results of the proposed model to experimental results provides the basis for a better understanding of the physics of subcooled bubbly flow in narrow channels.


Author(s):  
Yasuhisa Shinmoto ◽  
Shinichi Miura ◽  
Koichi Suzuki ◽  
Yoshiyuki Abe ◽  
Haruhiko Ohta

Recent development in electronic devices with increased heat dissipation requires severe cooling conditions and an efficient method for heat removal is needed for the cooling under high heat flux conditions. Most researches are concentrated on small semiconductors with high heat flux density, while almost no existing researches concerning the cooling of a large semiconductor, i.e. power electronics, with high heat generation density from a large cooling area. A narrow channel between parallel plates is one of ideal structures for the application of boiling phenomena which uses the cooling for such large semiconductors. To develop high-performance cooling systems for power electronics, experiments on increase in critical heat flux (CHF) for flow boiling in narrow channels by improved liquid supply was conducted. To realize the cooling of large areas at extremely high heat flux under the conditions for a minimum gap size and a minimum flow rate of liquid supplied, the structure with auxiliary liquid supply was devised to prevent the extension of dry-patches underneath flattened bubbles generated in a narrow channel. The heating surface was experimented in two channels with different dimensions. The heating surfaces have the width of 30mm and the lengths of 50mm and 150mm in the flow direction. A large width of actual power electronics is realizable by the parallel installation of the same channel structure in the transverse direction. The cooling liquid is additionally supplied via sintered metal plates from the auxiliary unheated channels located at sides or behind the main heated channel. To supply the liquid to the entire heating surface, fine grooves are machined on the heating surface for enhance the spontaneous liquid supply by the aid of capillary force. The gap size of narrow channels are varied as 0.7mm, 2mm and 5mm. Distribution of liquid flow rate to the main heated channel and the auxiliary unheated channels were varied to investigate its effect on the critical heat flux. Test liquids employed are R113, FC72 and water. The systematic experiments by using water as a test liquid were conducted. Critical heat flux values larger than 2×106W/m2 were obtained at both gap sizes of 2mm and 5mm for a heated length of 150mm. A very high heat transfer coefficient as much as 1×105W/m2K was obtained at very high heat flux near CHF for the gap size of 2mm. This paper is a summary of experimental results obtained in the past by the present authors.


Sign in / Sign up

Export Citation Format

Share Document