Viscosity of metallic glass-forming liquids based on Zr by fast-scanning calorimetry

2021 ◽  
pp. 117370
Author(s):  
R. Al-Mukadam ◽  
I.K. Götz ◽  
M. Stolpe ◽  
J. Deubener
2021 ◽  
Author(s):  
Raschid Al-Mukadam ◽  
Inga K. Götz ◽  
Moritz Stolpe ◽  
Joachim Deubener

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 954
Author(s):  
Xavier Monnier ◽  
Sara Marina ◽  
Xabier Lopez de Pariza ◽  
Haritz Sardón ◽  
Jaime Martin ◽  
...  

The present work aims to provide insights on recent findings indicating the presence of multiple equilibration mechanisms in physical aging of glasses. To this aim, we have investigated a glass forming polyether, poly(1-4 cyclohexane di-methanol) (PCDM), by following the evolution of the enthalpic state during physical aging by fast scanning calorimetry (FSC). The main results of our study indicate that physical aging persists at temperatures way below the glass transition temperature and, in a narrow temperature range, is characterized by a two steps evolution of the enthalpic state. Altogether, our results indicate that the simple old-standing view of physical aging as triggered by the α relaxation does not hold true when aging is carried out deep in the glassy state.


2020 ◽  
Vol 6 (17) ◽  
pp. eaay1454
Author(s):  
Xavier Monnier ◽  
Daniele Cangialosi ◽  
Beatrice Ruta ◽  
Ralf Busch ◽  
Isabella Gallino

Understanding how glasses form, the so-called vitrification, remains a major challenge in materials science. Here, we study vitrification kinetics, in terms of the limiting fictive temperature, and atomic mobility related to the α-relaxation of an Au-based bulk metallic glass former by fast scanning calorimetry. We show that the time scale of the α-relaxation exhibits super-Arrhenius temperature dependence typical of fragile liquids. In contrast, vitrification kinetics displays milder temperature dependence at moderate undercooling, and thereby, vitrification takes place at temperatures lower than those associated to the α-relaxation. This finding challenges the paradigmatic view based on a one-to-one correlation between vitrification, leading to the glass transition, and the α-relaxation. We provide arguments that at moderate to deep undercooling, other atomic motions, which are not involved in the α-relaxation and that originate from the heterogeneous dynamics in metallic glasses, contribute to vitrification. Implications from the viewpoint of glasses fundamental properties are discussed.


2007 ◽  
Vol 22 (2) ◽  
pp. 352-357 ◽  
Author(s):  
Y.F. Sun ◽  
F.S. Li ◽  
S.K. Guan ◽  
M.Q. Tang ◽  
C.H. Shek

Cylindrical Cu42.5Ti41.5Ni7.5Zr2.5Hf5Si1 bulk metallic glass with a diameter of 2 mm was fabricated by copper-mold casting. X-ray diffraction and differential scanning calorimetry analysis of the material showed that the alloy has a homogenous amorphous structure and high glass-forming ability. However, detailed observation by transmission electron microscopy revealed that a kind of nanocrystal with size of about 20 nm is sparsely distributed in the glass matrix. Nanobeam electron diffraction experiments indicated that the nanocrystal has a face-centered cubic crystalline structure. Room-temperature compression tests revealed that the alloy has a high fracture strength of 2250 MPa and obvious plastic strain of about 5.3%. Nanoindentation tests revealed that the as-cast alloy exhibits obviously serrated flow over a wide range of loading rate from 0.5 to 10 mN/min.


2002 ◽  
Vol 754 ◽  
Author(s):  
Haein Choi-Yim ◽  
Jan Schroers ◽  
William L. Johnson

ABSTRACTTungsten wire or particle reinforced metallic glass matrix composites are produced by infiltrating liquid Zr57Nb5Al10Cu15.4Ni12.6 (Vit106) into tungsten reinforcements at 1150 K and at 1425 K. X-ray diffraction, differential scanning calorimetry, and scanning electron microscopy are carried out to characterize the composite. The matrix of the composite processed at 1150 K is mostly amorphous, with some embedded crystals. During processing, tungsten dissolves in the glass-forming melt and upon quenching precipitates over a relatively narrow zone near the interface between the tungsten and matrix. In the composites processed at 1425 K, tungsten dissolves in the melt and diffuses through the liquid medium, and then reprecipitates upon quenching. The faster kinetics at this high temperature results uniform distribution of the crystals throughout the matrix. Mechanical properties of the differently processed composites containing wires and particles are compared and discussed. The composites exhibit a plasticity of up to 16 % without sacrificing the high strength to failure that is comparable to monolithic Vit 106.


2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Yu Luo ◽  
Yidong Jiang ◽  
Pei Zhang ◽  
Xin Wang ◽  
Haibo Ke ◽  
...  

Abstract Zr-based Bulk metallic glasses exhibit incredible corrosion resistance and glass forming ability, however, these properties need further enhancement to meet the practical use. In this study, Zr63Fe2.5Cu23Al11.5, a new type of Zr-based bulk metallic glass was fabricated. Potentiodynamic polarization techniques were used to measure the corrosion resistance of this alloy. Furthermore, crystallization behavior and kinetics of Zr63Fe2.5Cu23Al11.5 bulk metallic glass were investigated by using differential scanning calorimetry of non-isothermal model. Kissinger and Ozawa methods were used for calculating activation energies of crystallization and the mechanism of crystallization was analyzed by Johnson-Mehl-Avrami-Kolmogorow methods. The results suggest that this specified metallic glass system possesses a relatively high thermal stability and glass forming ability. Moreover, the crystallization procedure is mainly dominated by nucleation with an increasing rate. The study demonstrates that the slight composition adjustment of Zr–Fe–Cu–Al system bulk metallic glass can make a considerable contribution to higher glass forming and thermal stability as well as corrosion resistance.


2004 ◽  
Vol 19 (5) ◽  
pp. 1307-1310 ◽  
Author(s):  
L. Xia ◽  
M.B. Tang ◽  
H. Xu ◽  
M.X. Pan ◽  
D.Q. Zhao ◽  
...  

A hard magnetic Nd50Al15Fe15Co20 bulk metallic glass (BMG) was prepared in the shape of a rod up to 3 mm in diameter by suction casting. The glass transition and crystallization behaviors as well as their kinetic nature have been studied. In contrast to the previously reported hard magnetic Nd–Al–Fe–Co BMGs, Nd50Al15Fe15Co20 as-cast rod exhibits a distinct glass transition and multistep crystallization behaviors in the differential scanning calorimetry traces and lower coercivity. The BMG provides an ideal model for the investigation of glass transition and crystallization of hard magnetic Nd–Al–Fe–Co glass-forming alloys.


Sign in / Sign up

Export Citation Format

Share Document