Abstract
Fluoride contamination of groundwater has become a major concern worldwide, resulting in serious medical conditions such as dental and skeletal fluorosis. Consequently, the WHO recommends that drinking water should not contain more than 1.5 mg/l of fluoride. Various defluoridation techniques such as coagulation, reverse osmosis, activated alumina adsorption, and biosorbent adsorption have been developed. Adsorption through the activated alumina and biosorbent process is not cost effective and has regeneration problems, and the reverse osmosis process has the high initial cost which makes it unacceptable for developing countries. Coagulation is a commonly employed field technology for defluoridation, which involves the addition of aluminum salts, lime, and bleaching powder followed by rapid mixing, flocculation, sedimentation, and filtration but suffers from a limitation of high residual aluminum in treated water. This paper critically reviews the recent developments in the coagulation technique for defluoridation along with its comparison to other defluoridation techniques. The review describes the pertinent gaps in the process and throws open suggestions for extending research by citing the recent studies which may lead to the revival of the process. The description about the suspension of alumino-fluoro complexes that constitute a substantial part of the residual aluminum after alum treatment has been narrated in the paper that helps in a deeper understanding of the defluoridation mechanism. To make the process highly suitable for communities, appropriate technological interventions, such as converting it to a continuous mode of operation, replacing alum with poly-aluminum chloride (PAC), and attaching a micro-filtration unit in series of the existing process, can be done. Also, using PAC as a coagulant with sand filtration has to be considered for making the process more efficient.
A Review on Reverse Osmosis and Nanofiltration Membranes for Water Purification