Effect of temperature on soil structural stability as characterized by high energy moisture characteristic method

CATENA ◽  
2018 ◽  
Vol 170 ◽  
pp. 290-304 ◽  
Author(s):  
H. Kelishadi ◽  
M.R. Mosaddeghi ◽  
S. Ayoubi ◽  
A.I. Mamedov
Keyword(s):  
Structural Stability ◽  
High Energy ◽  
Effect Of Temperature ◽  
Characteristic Method ◽  
Moisture Characteristic ◽  
Soil Structural Stability

An examination of the wet aggregate analysis, the moisture characteristic, and infiltration-percolation methods of determining the stability of soil aggregates

Soil Research ◽  
1972 ◽  
Vol 10 (1) ◽  
pp. 15 ◽  
Author(s):  
N Collis-George ◽  
KB Laryea
Keyword(s):  
Structural Stability ◽  
Soil Aggregates ◽  
High Energy ◽  
Characteristic Method ◽  
Analysis Method ◽  
Flood Irrigation ◽  
Aggregate Analysis ◽  
Moisture Characteristic ◽  
The Stability

Four methods of assessing structural stability of aggregates which employ different disruptive forces have been examined. Sorptivity (Philip 1957) has been demonstrated to be a useful method of assessing structural stability of soils during infiltration. The results obtained are consistent with those using either the high energy moisture characteristic method of Childs (1940, 1942), the wet aggregate analysis method of Quirk (1950), and the qualitative slaking-dispersion classification of aggregates proposed by Emerson (1967). Using these four methods, one soil was classified as stable, and two unstable to flood irrigation, whereas conventional chemical definitions did not distinguish unequivocally between them.

scholarly journals Soil Structure Stability under Different Land Uses in Association with Polyacrylamide Effects

2021 ◽  
Vol 13 (3) ◽  
pp. 1407
Author(s):  
Amrakh I. Mamedov ◽  
Atsushi Tsunekawa ◽  
Nigussie Haregeweyn ◽  
Mitsuru Tsubo ◽  
Haruyuki Fujimaki ◽  
...  
Keyword(s):  
Land Use ◽  
Structural Stability ◽  
Soil Structure ◽  
Water Retention ◽  
High Energy ◽  
Structure Stability ◽  
Model Parameters ◽  
Retention Model ◽  
Watershed Land Use ◽  
Soil Structural Stability

Soil structural stability is a vital aspect of soil quality and functions, and of maintaining sustainable land management. The objective of this study was to compare the contribution of four long-term land-use systems (crop, bush, grass, and forest) coupled with anionic polyacrylamide (PAM = 0, 25, and 200 mg L−1) application on the structural stability of soils in three watersheds of Ethiopia varying in elevation. Effect of treatments on soil structural stability indices were assessed using the high energy moisture characteristic (HEMC, 0–50 hPa) method, which provides (i) water retention model parameters α and n, and (ii) soil structure index (SI). Soil (watershed), land use and PAM treatments had significant effects on the shape of the water retention curves (α, n) and SI, with diverse changes in the macropore sizes (60–250; >250 μm). Soil organic carbon (SOC) content and SI were strongly related to soil pH, CaCO3 soil type-clay mineralogy, exchangeable Ca2+, and Na+ (negatively). The order of soil SI (0.013–0.064 hPa−1) and SOC (1.4–8.1%) by land use was similar (forest > grass > bush > cropland). PAM effect on increasing soil SI (1.2–2.0 times), was inversely related to SOC content, being also pronounced in soils from watersheds of low (Vertisol) and medium (Luvisol) elevation, and the cropland soil from high (Acrisol) elevation. Treating cropland soils with a high PAM rate yielded greater SI (0.028–0.042 hPa−1) than untreated bush- and grassland soils (0.021–0.033 hPa−1). For sustainable management and faster improvement in soil physical quality, soil properties, and land-use history should be considered together with PAM application.

Characterization of Melting and Solidification Phenomena in Electromagnetic Punching of Aluminum Tubes

2012 ◽  
Vol 134 (1) ◽  
Author(s):  
De Waele Wim ◽  
Faes Koen ◽  
Van Haver Wim
Keyword(s):  
Plastic Deformation ◽  
Energy Levels ◽  
High Energy ◽  
Effect Of Temperature ◽  
Fracture Mechanisms ◽  
Time Interval ◽  
Short Time Interval ◽  
Total Width ◽  
Premature Failure ◽  
Charging Energy

Electromagnetic punching of tubular products is considered to be a promising innovative perforating process. The required punching energy decreases when using high velocities. Also, less tools are required when compared to conventional mechanical punching. However, the increase in punching speed can involve new strain and fracture mechanisms which are characteristic of the dynamic loading. In high energy rate forming processes the effect of temperature versus time gradient on the material properties becomes important due to the heat accumulated from plastic deformation and friction. The deformation induced heating will promote strain localization in it, possibly degrade its formability and cause premature failure in the regions of high localized strain. The feasibility of the electromagnetic pulse forming process for punching holes in aluminum cylindrical specimens has been investigated on an experimental trial-and-error basis. Experiments were performed using a Pulsar system (model 50/25) with a maximum charging energy of 50 kJ and a discharge circuit frequency of 14 kHz. Microscopic and metallographic inspection of the punched workpieces, together with hardness measurements, was performed to critically evaluate the quality of the cuts. It was observed that damage occurred at part of the edge of the punched hole during some of the perforation experiments. It was evidenced that in most workpieces, especially those performed at higher charging energy levels, a considerably high temperature must have been reached in the regions near the punched hole. The aluminum in this region was assumed to have melted and resolidified. These assumptions were affirmed by the following observations. Microscopic-size precipitates present in the unaffected base metal microstructure, had completely dissolved in that region; shrinkage cavities and dendrite rich regions were clearly visible. Next to this region, a heat affected zone was present where the grain boundaries had partially melted and precipitates partially disappeared. Considerably high temperatures, in the order of 520 to 660 °C, were reached in the regions around the punched holes, leading to melting and resolidification of the material. The total width of the thermally affected regions appeared to be larger at higher energy levels. The combination of heat generated by ohmic heating and by plastic deformation in a very short time interval is the most probable cause of the high peak temperatures that have occurred during the electromagnetic punching process.

scholarly journals Organic matter and soil aggregation in agricultural systems with different adoption times

2019 ◽  
Vol 40 (6Supl3) ◽  
pp. 3443 ◽  
Author(s):  
Jean Sérgio Rosset ◽  
Maria do Carmo Lana ◽  
Marcos Gervasio Pereira ◽  
Jolimar Antonio Schiavo ◽  
Leandro Rampim ◽  
...  
Keyword(s):  
Organic Matter ◽  
Structural Stability ◽  
Soil Aggregation ◽  
Total Carbon ◽  
Management Systems ◽  
Physical Fractionation ◽  
Positive Effects ◽  
Brachiaria Ruziziensis ◽  
No Till ◽  
Soil Structural Stability

In conservation management systems, such as no-till (NT), it is important to analyze the pattern of changes in soil quality as a function of the time since adoption of the system. This study evaluated the physical fractions of organic matter and soil aggregation in management systems in areas cultivated with different times since implementation of NT: 6, 14, and 22 successive years of soybean and maize/wheat crops (NT6, NT14, and NT22, respectively); 12 years of no-till with successive years of soybean and maize/wheat crops, and the last 4 years with integration of maize and ruzi grass (Brachiaria ruziziensis) - (NT+B); pasture; and forest. Physical fractionation of organic matter determined the total carbon (TC), particulate organic matter (POM), and mineral organic matter (MOM) by calculating the carbon management index (CMI) and variables related to soil structural stability. Forest and pasture areas showed the highest contents of TC, POM, and MOM, as well as higher stocks of POM and MOM. Among the cultivated areas, higher TC and particulate fractions of organic matter and the best CMI values were observed in the area of NT22. There were changes in aggregation indices, depending on the time since implementation of NT. Areas of NT22, pasture, and forest showed the greatest evolution in C-CO2, indicating increased biological activity, with positive effects on soil structural stability.

scholarly journals Cation ratio of soil structural stability (CROSS)

Soil Research ◽  
2011 ◽  
Vol 49 (3) ◽  
pp. 280 ◽  
Author(s):  
Pichu Rengasamy ◽  
Alla Marchuk
Keyword(s):  
Hydraulic Conductivity ◽  
Structural Stability ◽  
Control Treatment ◽  
Recycled Water ◽  
Clay Dispersion ◽  
Soil Structural Stability ◽  
Salt Affected Soils ◽  
Highly Correlated ◽  
Irrigation Waters ◽  
Cation Ratio

Sodium salts tend to dominate salt-affected soils and groundwater in Australia; therefore, sodium adsorption ratio (SAR) is used to parameterise soil sodicity and the effects of sodium on soil structure. However, some natural soils in Australia, and others irrigated with recycled water, have elevated concentrations of potassium and/or magnesium. Therefore, there is a need to derive and define a new ratio including these cations in place of SAR, which will indicate the dispersive effects of Na and K on clay dispersion, and Ca and Mg on flocculation. Based on the differential dispersive effects Na and K and the differential flocculation powers of Ca and Mg, we propose the concept of ‘cation ratio of soil structural stability’ (CROSS), analogous to SAR. This paper also gives the results of a preliminary experiment conducted on three soils varying in soil texture on hydraulic conductivity using percolating waters containing different proportions of the cations Ca, Mg, K, and Na. The relative changes in hydraulic conductivity of these soils, compared with the control treatment using CaCl2 solution, was highly correlated with CROSS. Clay dispersion in 29 soils treated with irrigation waters of varying cationic composition was highly correlated with CROSS rather than SAR. It was also found that CROSS measured in 1 : 5 soil/water extracts was strongly related to the ratio of exchangeable cations. These results encourage further study to investigate the use of CROSS as an index of soil structural stability in soils with different electrolytes, organic matter, mineralogy, and pH.

Amending soil with sludge, manure, humic acid, orthophosphate and phytic acid: effects on aggregate stability

Soil Research ◽  
2014 ◽  
Vol 52 (4) ◽  
pp. 317 ◽  
Author(s):  
A. I. Mamedov ◽  
B. Bar-Yosef ◽  
I. Levkovich ◽  
R. Rosenberg ◽  
A. Silber ◽  
...  
Keyword(s):  
Humic Acid ◽  
Phytic Acid ◽  
Structural Stability ◽  
Organic Amendments ◽  
Aggregate Stability ◽  
Loamy Sand ◽  
Soil Aggregate Stability ◽  
Before And After ◽  
Soil Structural Stability ◽  
The Stability

Recycling of organic wastes via their incorporation in cultivated lands is known to alter soil structural stability. Aggregate stability tests are commonly used to express quantitatively the susceptibility of soil structural stability to deformation. The objective of this study was to investigate the effects of biosolids addition, namely composted manure (MC) and activated sludge (AS), and spiking of the soils with orthophosphate (OP), phytic acid (PA) or humic acid (HA), on soil aggregate stability of semi-arid loamy sand, loam and clay soils before and after subjecting the soils to six rain storms (each 30 mm rain with a break of 3–4 days). Aggregate stability was determined from water-retention curves at high matric potential. The effects of the applied amendments on pre- and post-rain aggregate stability were inconsistent and soil-dependent. For the pre-rain state, all of the tested amendments improved aggregate stability relative to the control. For the post-rain condition, aggregate stability was lower in the MC, OP and PA treatments and higher in the AS and HA treatments than in the control. The coarse-textured loam and loamy sand soils were more affected by the soil amendments than the clay soil. For the pre-rain state, addition of organic matter significantly improved macro-porosity and hence the stability of apparent macro-aggregate (>250 μm). Our results indicate a possible advantage for separation of aggregates into macro- and micro-aggregates for more precise evaluation and understanding of the effects organic amendments might have on aggregate stability.

Sign in / Sign up

Export Citation Format

Share Document