The effect of fibre reinforcement on the chloride diffusion property of concrete is controversial, and the coupling effect of sulphate erosion and drying–wetting cycles in marine environments has been neglected in previous studies. In this study, the chloride diffusion property of hybrid basalt–polypropylene fibre-reinforced concrete subjected to a combined chloride–sulphate solution under drying–wetting cycles was investigated. The effects of basalt fibre (BF), polypropylene fibre (PF), and hybrid BP–PF on the chloride diffusion property were analysed. The results indicate that the presence of sulphate inhibits the diffusion of chloride at the early stage of erosion. However, at the late stage of erosion, sulphate does not only accelerate the diffusion of chloride by causing cracking of the concrete matrix but also leads to a decrease in the alkalinity of the pore solution, which further increases the risk of corrosion of the reinforcing steel. An appropriate amount of fibre can improve the chloride attack resistance of concrete at the early stage. With the increase in erosion time, the fibre effectively prevents the formation and development of sulphate erosion microcracks, thus reducing the adverse effects of sulphate on the resistance of concrete to chloride attack. The effects of sulphate and fibre on the chloride diffusion property were also elucidated in terms of changes in corrosion products, theoretical porosity, and the fibre-matrix interface transition zone.
Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: State of the art
