Controllable interfacial adhesion behaviors of polymer-on-polymer surfaces during fused deposition modeling 3D printing process

2020 ◽  
Vol 739 ◽  
pp. 136959 ◽  
Author(s):  
Xu Zhang ◽  
Jianlei Wang
Keyword(s):  
3D Printing ◽  
Interfacial Adhesion ◽  
Fused Deposition Modeling ◽  
Polymer Surfaces ◽  
Printing Process ◽  
Fused Deposition ◽  
Deposition Modeling

Hochproduktiver fertigungsangepasster 3D-Druck/Productive and manufacturing adjusted 3D printing

2017 ◽  
Vol 107 (07-08) ◽  
pp. 520-523
Author(s):  
J. Prof. Bliedtner ◽  
M. Schilling
Keyword(s):  
3D Printing ◽  
Research And Development ◽  
Fused Deposition Modeling ◽  
Dynamic Properties ◽  
Development Project ◽  
Efficient Production ◽  
Large Format ◽  
Printing Process ◽  
Fused Deposition ◽  
Deposition Modeling

Das FDM (Fused Deposition Modeling)-Verfahren ist aufgrund der Vielzahl von industriellen und privaten Anwendungen gegenwärtig das erfolgreichste 3D-Druck-Verfahren. Ziel des Forschungs- und Entwicklungsprojektes „HP3D“ ist die effiziente Herstellung von großformatigen Bauteilen in einem echten 3D-Verfahren aus frei wählbaren thermoplastischen Kunststoffen. An die Umsetzung des Projekts wurde sehr komplex herangegangen, um zu garantieren, dass die mechanischen und dynamischen Eigenschaften der aufgebauten Teile den konzipierten Eigenschaften entsprechen.   The FDM process is currently the most successful 3D printing process due to the multitude of industrial and private applications. The aim of the research and development project HP3D is the efficient production of large-format components in a real 3D process made of freely selectable thermoplastics. The implementation of the project has been very complex in order to ensure that the mechanical and dynamic properties of the assembled parts correspond to the designed properties.

scholarly journals Research on improving the accuracy of FDM 3D printing process by using a new designed calibrating part

2019 ◽  
Vol 299 ◽  
pp. 01007
Author(s):  
Răzvan Păcurar ◽  
Valentin Buzilă ◽  
Ancuţa Păcurar ◽  
Eugen Guţiu ◽  
Sergiu Dan Stan ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Analysis Method ◽  
Element Analysis ◽  
Printing Process ◽  
Software Application ◽  
Fused Deposition ◽  
Finite Element Analysis Method ◽  
Deposition Modeling

The article presents theoretical and experimental research methods that were used at the Technical University of Cluj-Napoca (TUCN) to improve the accuracy of Fused Deposition Modeling (FDM) 3D printing process. Finite element analysis method was successfully used for estimating the shrinkages of an original calibrating part that has been originally conceived for this purpose, this part being finally made using an original software application and FDM 3D printing equipment at TUC-N.

scholarly journals Cellulose and Graphene Based Polyurethane Nanocomposites for FDM 3D Printing: Filament Properties and Printability

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 839
Author(s):  
Izaskun Larraza ◽  
Julen Vadillo ◽  
Tamara Calvo-Correas ◽  
Alvaro Tejado ◽  
Sheila Olza ◽  
...  
Keyword(s):  
3D Printing ◽  
Biomedical Applications ◽  
Fused Deposition Modeling ◽  
Cellulose Nanofibers ◽  
Waterborne Polyurethane ◽  
Printing Process ◽  
Fused Deposition ◽  
Good Shape ◽  
Deposition Modeling ◽  
New Applications

3D printing has exponentially grown in popularity due to the personalization of each printed part it offers, making it extremely beneficial for the very demanding biomedical industry. This technique has been extensively developed and optimized and the advances that now reside in the development of new materials suitable for 3D printing, which may open the door to new applications. Fused deposition modeling (FDM) is the most commonly used 3D printing technique. However, filaments suitable for FDM must meet certain criteria for a successful printing process and thus the optimization of their properties in often necessary. The aim of this work was to prepare a flexible and printable polyurethane filament parting from a biocompatible waterborne polyurethane, which shows potential for biomedical applications. In order to improve filament properties and printability, cellulose nanofibers and graphene were employed to prepare polyurethane based nanocomposites. Prepared nanocomposite filaments showed altered properties which directly impacted their printability. Graphene containing nanocomposites presented sound enough thermal and mechanical properties for a good printing process. Moreover, these filaments were employed in FDM to obtained 3D printed parts, which showed good shape fidelity. Properties exhibited by polyurethane and graphene filaments show potential to be used in biomedical applications.

scholarly journals A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters

2021 ◽  
Vol 11 (1) ◽  
pp. 639-649
Author(s):  
Ruben Bayu Kristiawan ◽  
Fitrian Imaduddin ◽  
Dody Ariawan ◽  
Ubaidillah ◽  
Zainal Arifin
Keyword(s):  
3D Printing ◽  
Manufacturing Process ◽  
Fused Deposition Modeling ◽  
Critical Parameters ◽  
Future Research ◽  
Printing Process ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
The Difference ◽  
Printing Parameters

Abstract This study aims to review research the progress on factors that affect the 3D printing results of the fused deposition modeling (FDM) process. The review is carried out by mapping critical parameters and characteristics determining FDM parameters, the effects of each parameter, and their interaction with other parameters. The study started from the filament manufacturing process, filament material types, and printing parameters of FDM techniques. The difference in each section has determined different parameters, and the respective relationships between parameters and other determinants during printing have a significant effect on printing results. This study also identifies several vital areas of previous and future research to optimize and characterize the critical parameters of the FDM printing process and FDM filament manufacturing.

Biodegradable 3D Printed Polymer Microneedles for Transdermal Drug Delivery

2018 ◽  
Author(s):  
Michael A. Luzuriaga ◽  
Danielle R. Berry ◽  
John C. Reagan ◽  
Ronald A. Smaldone ◽  
Jeremiah J. Gassensmith
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Transdermal Drug Delivery ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Modeling Software ◽  
Deposition Modeling ◽  
3D Printed ◽  
Microfabrication Technique ◽  
Mechanical Strengths

Biodegradable polymer microneedle (MN) arrays are an emerging class of transdermal drug delivery devices that promise a painless and sanitary alternative to syringes; however, prototyping bespoke needle architectures is expensive and requires production of new master templates. Here, we present a new microfabrication technique for MNs using fused deposition modeling (FDM) 3D printing using polylactic acid, an FDA approved, renewable, biodegradable, thermoplastic material. We show how this natural degradability can be exploited to overcome a key challenge of FDM 3D printing, in particular the low resolution of these printers. We improved the feature size of the printed parts significantly by developing a post fabrication chemical etching protocol, which allowed us to access tip sizes as small as 1 μm. With 3D modeling software, various MN shapes were designed and printed rapidly with custom needle density, length, and shape. Scanning electron microscopy confirmed that our method resulted in needle tip sizes in the range of 1 – 55 µm, which could successfully penetrate and break off into porcine skin. We have also shown that these MNs have comparable mechanical strengths to currently fabricated MNs and we further demonstrated how the swellability of PLA can be exploited to load small molecule drugs and how its degradability in skin can release those small molecules over time.

scholarly journals 3D Printing of Mini Tablets for Pediatric Use

2021 ◽  
Vol 14 (2) ◽  
pp. 143
Author(s):  
Julius Krause ◽  
Laura Müller ◽  
Dorota Sarwinska ◽  
Anne Seidlitz ◽  
Malgorzata Sznitowska ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Dosage Forms ◽  
Small Scale ◽  
Fused Deposition ◽  
On Demand ◽  
Pediatric Diseases ◽  
Deposition Modeling ◽  
Manufacturing Techniques ◽  
Pediatric Use

In the treatment of pediatric diseases, suitable dosages and dosage forms are often not available for an adequate therapy. The use of innovative additive manufacturing techniques offers the possibility of producing pediatric dosage forms. In this study, the production of mini tablets using fused deposition modeling (FDM)-based 3D printing was investigated. Two pediatric drugs, caffeine and propranolol hydrochloride, were successfully processed into filaments using hyprolose and hypromellose as polymers. Subsequently, mini tablets with diameters between 1.5 and 4.0 mm were printed and characterized using optical and thermal analysis methods. By varying the number of mini tablets applied and by varying the diameter, we were able to achieve different release behaviors. This work highlights the potential value of FDM 3D printing for the on-demand production of patient individualized, small-scale batches of pediatric dosage forms.

Iron–Paraffin Composite Material for 3D Printing by Fused Deposition Modeling Method

2021 ◽  
Author(s):  
V.P. Bondarenko ◽  
O.V. Ievdokymova ◽  
O.O. Matviichuk ◽  
K.Ye. Kutakh ◽  
M.O. Tsysar
Keyword(s):  
Composite Material ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Modeling Method ◽  
Fused Deposition ◽  
Deposition Modeling

Influence of Part Orientation on the Surface Roughness in the Process of Fused Deposition Modeling

2021 ◽  
Vol 896 ◽  
pp. 29-37
Author(s):  
Ján Milde ◽  
František Jurina ◽  
Jozef Peterka ◽  
Patrik Dobrovszký ◽  
Jakub Hrbál ◽  
...  
Keyword(s):  
Surface Roughness ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Orientation Angle ◽  
Acrylonitrile Butadiene Styrene ◽  
Lower Surface ◽  
Geometrical Model ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Part Orientation

The article focused on the influence of part orientation on the surface roughness of cuboid parts during the process of fabricating by FDM technology. The components, in this case, is simple cuboid part with the dimensions 15 mm x 15mm x 30 mm. A geometrical model is defined that considers the shape of the material filaments after deposition, to define a theoretical roughness profile, for a certain print orientation angle. Five different print orientations in the X-axis of the cuboid part were set: 0°, 30°, 45°, 60°, and 90°. According to previous research in the field of FDM technology by the author, the internal structure (infill) was set at the value of 70%. The method of 3D printing was the Fused Deposition Modeling (FDM) and the material used in this research was thermoplastic ABS (Acrylonitrile butadiene styrene). For each setting, there were five specimens (twenty five prints in total). Prints were fabricated on a Zortrax M200 3D printer. After the 3D printing, the surface “A” was investigated by portable surface roughness tester Mitutoyo SJ-210. Surface roughness in the article is shown in the form of graphs (Fig.7). Results show increase in part roughness with increasing degree of part orientation. When the direction of applied layers on the measured surface was horizontal, significant improvement in surface roughness was observed. Findings in this paper can be taken into consideration when designing parts, as they can contribute in achieving lower surface roughness values.

Sign in / Sign up

Export Citation Format

Share Document