scholarly journals Late development of audio-visual integration in the vertical plane

2021 ◽  
pp. 100043
Author(s):  
Gori Monica ◽  
Campus Claudio ◽  
Cappagli Giulia
Keyword(s):  
Vertical Plane ◽  
Late Development ◽  
Visual Integration

A High Performance Energy Analyzer for Use in Electron Scanning Microscopy

1969 ◽  
Vol 27 ◽  
pp. 14-15
Author(s):  
A. V. Crewe ◽  
M. Isaacson ◽  
D. Johnson
Keyword(s):  
High Performance ◽  
Vertical Plane ◽  
Median Plane ◽  
Electron Gun ◽  
Uniform Field ◽  
Loss Mechanism ◽  
Electron Scanning Microscopy ◽  
Sector Type ◽  
Double Focusing ◽  
Electron Energy Loss

A double focusing magnetic spectrometer has been constructed for use with a field emission electron gun scanning microscope in order to study the electron energy loss mechanism in thin specimens. It is of the uniform field sector type with curved pole pieces. The shape of the pole pieces is determined by requiring that all particles be focused to a point at the image slit (point 1). The resultant shape gives perfect focusing in the median plane (Fig. 1) and first order focusing in the vertical plane (Fig. 2).

The time course of calcium deposition in shells of the barnacle (Balanus amphititre amphititre) during cyprid-juvenile metamorphosis

1994 ◽  
Vol 52 ◽  
pp. 178-179
Author(s):  
Nancy R. Wallace ◽  
Craig C. Freudenrich ◽  
Karl Wilbur ◽  
Peter Ingram ◽  
Ann LeFurgey
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Time Course ◽  
Vertical Plane ◽  
Mantle Cavity ◽  
Qualitative Assessment ◽  
Calcium Deposition ◽  
Free Swimming ◽  
Freeze Dried ◽  
Scanning Electron

The morphology of balanomorph barnacles during metamorphosis from the cyprid larval stage to the juvenile has been examined by light microscopy and scanning electron microscopy (SEM). The free-swimming cyprid attaches to a substrate, rotates 90° in the vertical plane, molts, and assumes the adult shape. The resulting metamorph is clad in soft cuticle and has an adult-like appearance with a mantle cavity, thorax with cirri, and incipient shell plates. At some time during the development from cyprid to juvenile, the barnacle begins to mineralize its shell, but it is not known whether calcification occurs before, during, or after ecdysis. To examine this issue, electron probe x-ray microanalysis (EPXMA) was used to detect calcium in cyprids and juveniles at various times during metamorphosis.Laboratory-raised, free-swimming cyprid larvae were allowed to settle on plastic coverslips in culture dishes of seawater. The cyprids were observed with a dissecting microscope, cryopreserved in liquid nitrogen-cooled liquid propane at various times (0-24 h) during metamorphosis, freeze dried, rotary carbon-coated, and examined with scanning electron microscopy (SEM). EPXMA dot maps were obtained in parallel for qualitative assessment of calcium and other elements in the carapace, wall, and opercular plates.

Analysis of Roofing Materials for Rural Buildings Projects: Costs and Visual Integration

2016 ◽  
Vol 2 (09) ◽  
pp. 587-592
Author(s):  
Antonio M. Reyes-Rodríguez ◽  
Justo García-Sanz-Calcedo ◽  
Lorenzo García-Moruno ◽  
Julio Hernández-Blanco
Keyword(s):  
Visual Integration ◽  
Rural Buildings ◽  
Roofing Materials

Computing Model for Vibratory Digging-Out of Sugar Beet Roots

2014 ◽  
Vol 1 (2) ◽  
pp. 52-60
Author(s):  
V. Bulgakov ◽  
V. Adamchuk ◽  
H. Kaletnyk
Keyword(s):  
Differential Equations ◽  
Sugar Beet ◽  
Vertical Plane ◽  
Forward Motion ◽  
Admissible Velocity ◽  
Beet Root ◽  
Optimum Speed ◽  
Analytical Research ◽  
Sugar Beet Root ◽  
The Given

The new design mathematical model of the sugar beet roots vibration digging-out process with the plowshare vibration digging working part has been created. In this case the sugar beet root is simulated as a solid body , while the plowshare vibration digging working part accomplishes fl uctuations in the longitudinal - vertical plane with the given amplitude and frequency in the process of work . The aim of the current research has been to determine the dependences between the design and kinematic parameters of the sugar beet roots vibra- tion digging-out technological process from soil , which provide the ir non-damage. Methods . For the aim ac- complishment, the methods of design mathematical models constructing based on the classical laws of me- chanics are applied. The solution of the obtained differential equations is accomplished with the PC involve- ment. Results . The differential equations of the sugar beet root’s motion in course of the vibration digging-out have been comprised . They allow to determine the admissible velocity of the vibration digging working part’s forward motion depending on the angular parameters of the latter. In the result of the computational simula- tion i.e., the solution of the obtained analytical dependence by PC, the graphic dependences of the admissible velocity of plowshare v ibration digging working part’s forward motion providing the extraction of the sugar beet root from soil without the breaking-off of its tail section have been determined. Conclusions . Due to the performed analytical research , it has been established that γ = 13 ... 16 ° , β = 20 ... 30 ° should be considered as the most reasonable values of γ and β angles of the vibration digging working part providing both its forward motion optimum speed and sugar beet root digging-out from the soil without damage . On the ground of the data obtained from the analytical rese arch, the new vibration digging working parts for the sugar beet roots have been designed; also the patents of Ukraine for the inventions have been obtained for them.

Risk analisys of self-induced hydraulic fracture growth in vertical plane

2019 ◽  
Vol 6 ◽  
pp. 50-53
Author(s):  
A.R. Davletova ◽  
◽  
A.I. Fedorov ◽  
G.A. Shchutsky ◽  
◽  
...  
Keyword(s):  
Hydraulic Fracture ◽  
Vertical Plane ◽  
Fracture Growth

ANALYSIS OF THE CREW PART OF THE LOCOMOTIVE TEM23 AND PROPOSALS FOR ELIMINATION OF DISADVANTAGES

2020 ◽  
Author(s):  
Dmitriy Antipin ◽  
Vladimir Vorobev ◽  
Denis Bondarenko ◽  
Gennadiy Petrov
Keyword(s):  
Vertical Plane ◽  
The Body ◽  
Diesel Locomotive ◽  
Design Features ◽  
Bogie Frame ◽  
Spring Suspension ◽  
In Series

The analysis of the design features of the bogie of the TEM23 shunting diesel locomotive is carried out. In the process of analysis, the directions of its improvement are determined. It is proposed to rotate the bogie frame in the vertical plane by reducing the body supports to two and using a pivot with low lowering, equip the bogies with pneumatic spring suspension in the form of two corrugations installed in series with shortened suspension springs. The proposed options for improving the undercarriage of a diesel locomotive will increase the competitiveness of products and reduce costs

CALCULATION-EXPERIMENTAL METHOD FOR DEFINITION OF LOWEST FREQUENCY IN BENDING VIBRATIONS OF COACH CAR BODY IN VERTICAL PLANE BASED ON IDENTIFICATION OF ITS BENDING STIFFNESS

2020 ◽  
Vol 2020 (9) ◽  
pp. 35-46
Author(s):  
Aleksandr Skachkov ◽  
Viktor Vasilevskiy ◽  
Aleksey Yuhnevskiy
Keyword(s):  
Least Squares Method ◽  
Vertical Plane ◽  
Bending Stiffness ◽  
Dimensional Problem ◽  
Euler Beam ◽  
Bending Vibrations ◽  
Car Body ◽  
Variable Function ◽  
Experimental Values ◽  
Definition Of

The consideration of existing methods for a modal analysis has shown a possibility for the lowest frequency definition of bending vibrations in a coach car body in a vertical plane based on an indirect method reduced to the assessment of the bending stiffness of the one-dimensional model as a Bernoulli-Euler beam with fragment-constant parameters. The assessment mentioned can be obtained by means of the comparison of model deflections (rated) and a prototype (measured experimentally upon a natural body) with the use of the least-squares method that results in the necessity of the solution of the multi-dimensional problem with the reverse coefficient. The introduction of the hypothesis on ratability of real bending stiffness of the prototype and easily calculated geometrical stiffness of a model reduces a multi-dimensional problem incorrect according to Adamar to the simplest search of the extremum of one variable function. The procedure offered for the indirect assessment of bending stiffness was checked through the solution of model problems. The values obtained are offered to use for the assessment of the lowest frequency of bending vibrations with the aid of Ritz and Grammel methods. In case of rigid poles it results in formulae for frequencies into which there are included directly the experimental values of deflections.

Sign in / Sign up

Export Citation Format

Share Document