Conjugate heat transfer analysis of bubble growth during flow boiling in a rectangular microchannel

2021 ◽  
Vol 181 ◽  
pp. 121828
Author(s):  
Yuhao Lin ◽  
Junye Li ◽  
Yang Luo ◽  
Wei Li ◽  
Xing Luo ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Bubble Growth ◽  
Conjugate Heat Transfer ◽  
Flow Boiling ◽  
Heat Transfer Analysis ◽  
Rectangular Microchannel

scholarly journals Fully Coupled Large Eddy Simulation of Conjugate Heat Transfer in a Ribbed Channel with a 0.1 Blockage Ratio

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2096
Author(s):  
Joon Ahn ◽  
Jeong Chul Song ◽  
Joon Sik Lee
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Conjugate Heat Transfer ◽  
Heat Transfer Analysis ◽  
Scale Model ◽  
Computational Domain ◽  
Blockage Ratio ◽  
Ribbed Channel ◽  
Large Eddy ◽  
Cooling Passage

Large eddy simulations are performed to analyze the conjugate heat transfer of turbulent flow in a ribbed channel with a heat-conducting solid wall. An immersed boundary method (IBM) is used to determine the effect of heat transfer in the solid region on that in the fluid region in a unitary computational domain. To satisfy the continuity of the heat flux at the solid–fluid interface, effective conductivity is introduced. By applying the IBM, it is possible to fully couple the convection on the fluid side and the conduction inside the solid and use a dynamic subgrid scale model in a Cartesian grid. The blockage ratio (e/H) is set at 0.1, which is typical for gas turbine blades. Through conjugate heat transfer analysis, it is confirmed that the heat transfer peak in front of the rib occurs because of the impinging of the reattached flow and not the influence of the thermal boundary condition. When the rib turbulator acts as a fin, its efficiency and effectiveness are predicted to be 98.9% and 8.32, respectively. When considering conjugate heat transfer, the total heat transfer rate is reduced by 3% compared with that of the isothermal wall. The typical Biot number at the internal cooling passage of a gas turbine is <0.1, and the use of the rib height as the characteristic length better represents the heat transfer of the rib.

scholarly journals Numerical Simulation of Secondary Flow in Gas Turbine Disc Cavities, Including Conjugate Heat Transfer

1996 ◽  
Author(s):  
Y.-H. Ho ◽  
M. M. Athavale ◽  
J. M. Forry ◽  
R. C. Hendricks ◽  
B. M. Steinetz
Keyword(s):  
Heat Transfer ◽  
Secondary Flow ◽  
Conjugate Heat Transfer ◽  
Gas Flow ◽  
Numerical Study ◽  
Labyrinth Seal ◽  
Temperature Fields ◽  
Heat Transfer Analysis ◽  
Flow Rates ◽  
Turbine Disc

A numerical study of the flow and heat transfer in secondary flow elements of the entire inner portion of the turbine section of the Allison T-56/501D engine is presented. The flow simulation included the interstage cavities, rim seals and associated main path flows, while the energy equation also included the solid parts of the turbine disc, rotor supports, and stator supports. Solutions of the energy equations in these problems usually face the difficulty in specifications of wall thermal boundary conditions. By solving the entire turbine section this difficulty is thus removed, and realistic thermal conditions are realized on all internal walls. The simulation was performed using SCISEAL, an advanced 2D/3D CFD code for predictions of fluid flows and forces in turbomachinery seals and secondary flow elements. The mass flow rates and gas temperatures at various seal locations were compared with the design data from Allison. Computed gas flow rates and temperatures in the rim and labyrinth seal show a fair 10 good comparison with the design calculations. The conjugate heat transfer analysis indicates temperature gradients in the stationary intercavity walls, as well as the rotating turbine discs. The thermal strains in the stationary wall may lead to altered interstage labyrinth seal clearances and affect the disc cavity flows. The temperature, fields in the turbine discs also may lead to distortions that can alter the rim seal clearances. Such details of the flow and temperature fields are important in designs of the turbine sections to account for possible thermal distortions and their effects on the performance. The simulation shows that the present day CFD codes can provide the means to understand the complex flow field and thereby aid the design process.

scholarly journals A Conjugate Heat Transfer Analysis of a Triangular Finned Annulus Based on DG-FEM

2018 ◽  
Vol 2018 ◽  
pp. 1-18
Author(s):  
Muhammad Ishaq ◽  
Khalid Saifullah Syed ◽  
Zafar Iqbal ◽  
Ahmad Hassan
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Conjugate Heat Transfer ◽  
Strong Influence ◽  
Heat Transfer Analysis ◽  
Conductivity Ratio ◽  
Geometric Configurations ◽  
Specific Configuration ◽  
Double Pipe ◽  
Pipe Heat

A DG-FEM based numerical investigation has been performed to explore the influence of the various geometric configurations on the thermal performance of the conjugate heat transfer analysis in the triangular finned double pipe heat exchanger. The computed results dictate that Nusselt number in general rises with values of the conductivity ratio of solid and fluid, for the specific configuration parameters considered here. However, the performance of these parameters shows strong influence on the conductivity ratio. Consequently, these parameters must be selected in consideration of the thermal resistance, for better design of heat exchanger.

Confined Bubble and Heat Transfer during Flow Boiling in a High Aspect Ratio Mini-Channel

2011 ◽  
Vol 312-315 ◽  
pp. 548-553 ◽  
Author(s):  
Yuan Wang ◽  
Khellil Sefiane
Keyword(s):  
Heat Transfer ◽  
Aspect Ratio ◽  
Bubble Growth ◽  
Flow Boiling ◽  
Critical Time ◽  
Heat Fluxes ◽  
Equivalent Radius ◽  
Mass Fluxes ◽  
Transfer Mechanisms ◽  
Working Liquid

Single vapour bubble growth and heat transfer mechanism during flow boiling in a rectangular horizontal mini-channel were experimentally investigated. The hydraulic diameter of the channel was 1454 μm, with an aspect ratio (Win/din) of 10. Degassed FC-72 was used as the working liquid. In this paper, bubble equivalent radius was found to increase linearly till a critical time, beyond which the growth turned into exponential. Bubble growth rate increases with increasing heat flux. Heat transfer mechanisms of the bubble growth at different heat fluxes and mass fluxes were discussed. In addition, the relation between thermal and flow conditions with bubble temporal geometry was explored.

Sign in / Sign up

Export Citation Format

Share Document