Free and forced wave propagation in beam lattice metamaterials with viscoelastic resonators

In many practical engineering situations, a source of vibrations may excite a large and flexible structure such as a ship’s deck, an aeroplane fuselage, a satellite antenna, a wall panel. To avoid transmission of the vibration and structure-borne sound, radial or polar periodicity may be used. In these cases, numerical approaches to study free and forced wave propagation close to the excitation source in polar coordinates are desirable. This is the paper’s aim, where a numerical method based on Floquet-theory and the FE discretision of a finite slice of the radial periodic structure is presented and verified. Only a small slice of the structure is analysed, which is approximated using piecewise Cartesian segments. Wave characteristics in each segment are obtained by the theory of wave propagation in periodic Cartesian structures and Finite Element analysis, while wave amplitude change due to the changes in the geometry of the slice is accommodated in the model assuming that the energy flow through the segments is the same. Forced response of the structure is then evaluated in the wave domain. Results are verified for an infinite isotropic thin plate excited by a point harmonic force. A plate with a periodic radial change of thickness is then studied. Free waves propagation are shown, and the forced response in the nearfield is evaluated, showing the validity of the method and the computational advantage compared to FE harmonic analysis for infinite structures.

Download Full-text

Electron Microscopy of Shock Loaded Polycrystalline Beryllium

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100052547 ◽

1974 ◽

Vol 32 ◽

pp. 506-507 ◽

Cited By ~ 1

Author(s):

J. M. Galbraith ◽

L. E. Murr ◽

A. L. Stevens

Keyword(s):

Electron Microscopy ◽

Wave Propagation ◽

Structural Change ◽

Single Crystal ◽

Diffraction Pattern ◽

Shock Loading ◽

Slip Systems ◽

Compression Tests ◽

X Ray Diffraction ◽

X Ray

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.

Download Full-text

7-beam lattice images of (110) oriented Ge

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100108593 ◽

1978 ◽

Vol 36 (1) ◽

pp. 290-291

Author(s):

J.R. Parsons ◽

C.W. Hoelke

Keyword(s):

Image Features ◽

Objective Lens ◽

Lattice Plane ◽

Lattice Image ◽

Crystalline Defects ◽

Transmission Electron ◽

Lattice Images ◽

Electron Microscopes ◽

Structural Aspects ◽

Beam Lattice

The direct imaging of a crystal lattice has intrigued electron microscopists for many years. What is of interest, of course, is the way in which defects perturb their atomic regularity. There are problems, however, when one wishes to relate aperiodic image features to structural aspects of crystalline defects. If the defect is inclined to the foil plane and if, as is the case with present 100 kV transmission electron microscopes, the objective lens is not perfect, then terminating fringes and fringe bending seen in the image cannot be related in a simple way to lattice plane geometry in the specimen (1).The purpose of the present work was to devise an experimental test which could be used to confirm, or not, the existence of a one-to-one correspondence between lattice image and specimen structure over the desired range of specimen spacings. Through a study of computed images the following test emerged.

Download Full-text

Calculation of structure images of crystalline defects

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100108556 ◽

1978 ◽

Vol 36 (1) ◽

pp. 282-283

Author(s):

M.A. O'Keefe ◽

Sumio Iijima

Keyword(s):

Diffuse Scattering ◽

Computing Time ◽

Continuous Distribution ◽

Sampling Interval ◽

Reciprocal Space ◽

Objective Lens ◽

Lattice Images ◽

Slice Method ◽

Space Cell ◽

Beam Lattice

We have extended the multi-slice method of computating many-beam lattice images of perfect crystals to calculations for imperfect crystals using the artificial superlattice approach. Electron waves scattered from faulted regions of crystals are distributed continuously in reciprocal space, and all these waves interact dynamically with each other to give diffuse scattering patterns.In the computation, this continuous distribution can be sampled only at a finite number of regularly spaced points in reciprocal space, and thus finer sampling gives an improved approximation. The larger cell also allows us to defocus the objective lens further before adjacent defect images overlap, producing spurious computational Fourier images. However, smaller cells allow us to sample the direct space cell more finely; since the two-dimensional arrays in our program are limited to 128X128 and the sampling interval shoud be less than 1/2Å (and preferably only 1/4Å), superlattice sizes are limited to 40 to 60Å. Apart from finding a compromis superlattice cell size, computing time must be conserved.

Download Full-text

Point and planar defects in the iron sulfide compounds Fe1-xS

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010011221x ◽

1984 ◽

Vol 42 ◽

pp. 434-435

Author(s):

Thao A. Nguyen

Keyword(s):

Low Temperatures ◽

Direct Evidence ◽

Iron Sulfide ◽

Planar Defects ◽

Selective Area ◽

Vacancy Ordering ◽

Different Types ◽

Lattice Images ◽

The Subject ◽

Beam Lattice

It is well known that the large deviations from stoichiometry in iron sulfide compounds, Fe1-xS (0≤x≤0.125), are accommodated by iron vacancies which order and form superstructures at low temperatures. Although the ordering of the iron vacancies has been well established, the modes of vacancy ordering, hence superstructures, as a function of composition and temperature are still the subject of much controversy. This investigation gives direct evidence from many-beam lattice images of Fe1-xS that the 4C superstructure transforms into the 3C superstructure (Fig. 1) rather than the MC phase as previously suggested. Also observed are an intrinsic stacking fault in the sulfur sublattice and two different types of vacancy-ordering antiphase boundaries. Evidence from selective area optical diffractograms suggests that these planar defects complicate the diffraction pattern greatly.

Download Full-text