Calculation method of the bearing capacity of a novel modular joint of an aluminium alloy lattice shell structure

Structures ◽  
2021 ◽  
Vol 34 ◽  
pp. 3268-3282
Author(s):  
Caiqi Zhao ◽  
Yunwen Zhou ◽  
Gang Wang ◽  
Haoyue Li ◽  
Yating Wang
Keyword(s):  
Bearing Capacity ◽  
Aluminium Alloy ◽  
Calculation Method ◽  
Shell Structure ◽  
Lattice Shell

Study on the Static Stability and the Ultimate Bearing Capacity of Vierendeel Latticed Shells

2011 ◽  
Vol 94-96 ◽  
pp. 868-871
Author(s):  
Wen Feng Du ◽  
Zhi Yong Zhou ◽  
Fu Dong Yu
Keyword(s):  
Finite Element Method ◽  
Bearing Capacity ◽  
Carrying Capacity ◽  
Shell Structure ◽  
Single Layer ◽  
Static Stability ◽  
Ultimate Bearing Capacity ◽  
The Finite Element Method ◽  
The Stability ◽  
Lattice Shell

Studies on the static stability and the ultimate bearing capacity of vierendeel latticed shells have been carried out. The buckling modal and the whole course of instability are shown using the Finite Element Method. The ultimate bearing capacity is compared with that of the single-layer latticed shell structure. The results show that the ultimate bearing capacity of the vierendeel latticed shells is 2.87 times more than that of the single-layer lattice shell in the condition of consuming the same steel. The vierendeel latticed shell structure not only has the advantages of concision and transparency like the single layer latticed shell structure, but also has the stability and carrying capacity like double-layer latticed shell structure.

Lateral Bearing Capacity and Stiffness Calculation Method of SRC-RC Columns

2019 ◽  
Vol 23 (5) ◽  
pp. 2158-2174 ◽  
Author(s):  
He Zhang ◽  
Pingzhou Cao ◽  
Kai Wu ◽  
Chao Xu ◽  
Lijian Ren
Keyword(s):  
Bearing Capacity ◽  
Calculation Method ◽  
Rc Columns

Calculation method for the axial load-bearing capacity of steel pipe-to-sleeve grouted connections

2022 ◽  
Vol 314 ◽  
pp. 125621
Author(s):  
Liwei Wu ◽  
Xueyuan Guo ◽  
Haibin Chen ◽  
Junyang Liu ◽  
Youpo Su
Keyword(s):  
Bearing Capacity ◽  
Calculation Method ◽  
Axial Load ◽  
Steel Pipe ◽  
Load Bearing Capacity ◽  
Load Bearing

Improved Calculation Method of Soil Bearing Capacity of Jack-Up Rig Based on Field Simulation Experiment

2018 ◽  
Author(s):  
Qishuai Yin ◽  
Jin Yang ◽  
Nanding Hu ◽  
Shanshan Shi ◽  
Yongqi Ma ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Calculation Method ◽  
Simulation Experiment ◽  
Field Simulation ◽  
Jack Up

scholarly journals Analysis and Calculation of Stability Coefficients of Cross-Laminated Timber Axial Compression Member

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4267
Author(s):  
Qi Ye ◽  
Yingchun Gong ◽  
Haiqing Ren ◽  
Cheng Guan ◽  
Guofang Wu ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Axial Compression ◽  
Calculation Method ◽  
National Standards ◽  
Test Results ◽  
Average Deviation ◽  
Stability Coefficient ◽  
Cross Laminated Timber ◽  
Stability Bearing Capacity ◽  
The Stability

Cross-laminated timber (CLT) elements are becoming increasingly popular in multi-storey timber-based structures, which have long been built in many different countries. Various challenges are connected with constructions of this type. One such challenge is that of stabilizing the structure against vertical loads. However, the calculations of the stability bearing capacity of the CLT members in axial compression in the structural design remains unsolved in China. This study aims to determine the stability bearing capacity of the CLT members in axial compression and to propose the calculation method of the stability coefficient. First, the stability coefficient calculation theories in different national standards were analyzed, and then the stability bearing capacity of CLT elements with four slenderness ratios was investigated. Finally, based on the stability coefficient calculation formulae in the GB 50005-2017 standard and the regression method, the calculation method of the stability coefficient for CLT elements was proposed, and the values of the material parameters were determined. The result shows that the average deviation between fitting curve and calculated results of European and American standard is 5.43% and 3.73%, respectively, and the average deviation between the fitting curve and the actual test results was 8.15%. The stability coefficients calculation formulae could be used to predict the stability coefficients of CLT specimens with different slenderness ratios well.

Practical Calculation Method for the Bearing Capacity at High Temperature of Concrete Filled Steel Tubular Columns Subjected to Fire

2014 ◽  
Vol 1065-1069 ◽  
pp. 1358-1362
Author(s):  
Jin Sheng Han ◽  
Hao Ran Liu ◽  
Shu Ping Cong
Keyword(s):  
High Temperature ◽  
Bearing Capacity ◽  
Fire Resistance ◽  
Calculation Method ◽  
Engineering Application ◽  
Practical Calculation ◽  
Tubular Columns ◽  
Calculation Results ◽  
Simplified Calculation ◽  
Simplified Calculation Method

The fire resistance of concrete filled steel tubular column is usually obtained by the numerical analysis method, which is difficult to operate and not convenient in the actual civil engineering. So it is necessary to study the simplified calculation method. A large number of numerical simulation results of the temperature distribution of the section and the bearing capacity at high temperature of the concrete filled steel tubular columns are analyzed. The influences of secondary parameters are simplified. The simplified calculation method at 150 min and 180 min for the bearing capacity at high temperature of concrete filled steel tubular columns subjected to axial compression and fire is presented on the basis of comprehensive analysis of the numerical calculation results. The calculation results can be used as the basis to judge the fire resistance. It is shown by the comparison with the experimental results that the precision of the simplified calculation method can meet the requirements of engineering application.

scholarly journals Study on Flexural Bearing Capacity Calculation Method of Enclosure Pile with Partial Excision in Deep Foundation Pit

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Mingfeng Lei ◽  
Linghui Liu ◽  
Yuexiang Lin ◽  
Jin Li
Keyword(s):  
Flexural Strength ◽  
Bearing Capacity ◽  
Calculation Method ◽  
Deep Foundation ◽  
Foundation Pit ◽  
Theoretical Derivation ◽  
Deep Foundation Pit ◽  
Practical Engineering ◽  
Capacity Calculation ◽  
Partial Excision

During deep foundation pit construction, the structural clearance intrusion, which is caused by the complex formation conditions and the inefficient drilling equipment, is usually detected due to the vertical deviation of piles. To meet construction requirements, pile parts intruding into the structural clearance are supposed to be excised. However, the sectional flexural strength of the pile is bound to decrease with partial excision, which would reduce the bearing capacity of the enclosing structure during construction. In this paper, a theoretical derivation of the normal sectional flexural strength of the partially excised circular pile is proposed. The derivation adopts the assumption of the plane section and steel ring equivalence and can be solved by the bisection method. Furthermore, the calculation method is applied to the pile evaluation of a practical engineering; also, the method is verified by the numerical method. The application results show that the excision of rebar and pile’s sectional area will cause a rapid linear decline in the sectional flexural strength. After excising 18 cm radial thickness of the circular pile (ϕ800 mm) and 6 longitudinal rebars, the sectional flexural strength of the pile decreases to 58% from the origin, which cannot meet the support requirement. The analysis indicates that pile reinforcements must be carried out to maintain the construction safety.

Sign in / Sign up

Export Citation Format

Share Document