Tailoring magnetic property and corrosion resistance of FeCoNiCuAl high-entropy alloy with Ce additive

2022 ◽  
pp. 163665
Author(s):  
Zhongyuan Wu ◽  
Bin Li ◽  
Mengya Chen ◽  
Yong Yang ◽  
Ruiyi Zheng ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Magnetic Property ◽  
High Entropy Alloy ◽  
High Entropy

scholarly journals Erosion and Corrosion Resistance Performance of Laser Metal Deposited High-Entropy Alloy Coatings at Hellisheidi Geothermal Site

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3071
Author(s):  
Andri Isak Thorhallsson ◽  
Francesco Fanicchia ◽  
Emily Davison ◽  
Shiladitya Paul ◽  
Svava Davidsdottir ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Microstructural Characterization ◽  
Corrosion Damage ◽  
Process Equipment ◽  
High Entropy Alloy ◽  
Low Alloy Steels ◽  
Manufacturing Defects ◽  
High Entropy ◽  
Alloy Steels ◽  
Resistance Performance

Geothermal process equipment and accessories are usually manufactured from low-alloy steels which offer affordability but increase the susceptibility of the materials to corrosion. Applying erosion-corrosion-resistant coatings to these components could represent an economical solution to the problem. In this work, testing of two newly developed laser metal deposited high-entropy alloy (LMD-HEA) coatings—CoCrFeNiMo0.85 and Al0.5CoCrFeNi, applied to carbon and stainless steels—was carried out at the Hellisheidi geothermal power plant. Tests in three different geothermal environments were performed at the Hellisheidi site: wellhead test at 194 °C and 14 bar, erosion test at 198 °C and 15 bar, and aerated test at 90 °C and 1 bar. Post-test microstructural characterization was performed via Scanning Eletron Microscope (SEM), Back-Scattered Electrons analysis (BSE), Energy Dispersive X-ray Spectroscopy (EDS), optical microscopy, and optical profilometry while erosion assessment was carried out using an image and chemical analysis. Both the CoCrFeNiMo0.85 and Al0.5CoCrFeNi coatings showed manufacturing defects (cracks) and were prone to corrosion damage. Results show that damage in the CoCrFeNiMo0.85-coated carbon steel can be induced by manufacturing defects in the coating. This was further confirmed by the excellent corrosion resistance performance of the CoCrFeNiMo0.85 coating deposited onto stainless steel, where no manufacturing cracks were observed.

scholarly journals Corrosion Behavior and Surface Treatment of Cladding Materials Used in High-Temperature Lead-Bismuth Eutectic Alloy: A Review

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 364
Author(s):  
Hao Wang ◽  
Jun Xiao ◽  
Hui Wang ◽  
Yong Chen ◽  
Xing Yin ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Liquid Metal ◽  
Energy Demand ◽  
Ceramic Coatings ◽  
High Entropy Alloy ◽  
Pressurized Water ◽  
Corrosion Morphology ◽  
High Entropy ◽  
Lead Bismuth Eutectic

Liquid metal fast reactors were considered to be the most promising solution to meet the enormous energy demand in the future. However, corrosion phenomenon caused by the liquid metal, especially in high-temperature lead-bismuth coolant, has greatly hindered the commercialization of the advanced Generation-IV nuclear system. This review discussed current research on the corrosion resistance of structural materials (such as EP823, T91, ODS, and authentic steels) in high-temperature liquid metal served as reactor coolants. The current corrosion resistance evaluation has proved that even for the excellent performance of EP823, the structural material selected in pressurized water reactor is not the ideal material for operation in the high-temperature lead-bismuth eutectic (LBE). Furthermore, the latest coating technologies that are expected to be applied to cladding materials for coolant system were extensively discussed, including Al-containing coatings, ceramic coatings, oxide coatings, amorphous coatings and high-entropy alloy coatings. The detailed comparison summarized the corrosion morphology and corrosion products of various coatings in LBE. This review not only provided a systematic understanding of the corrosion phenomena, but also demonstrated that coating technology is an effective method to solve the corrosion issues of the advanced next-generation reactors.

Influence of remelting and annealing treatment on corrosion resistance of AlFeNiCoCuCr high entropy alloy in 3.5% NaCl solution

2019 ◽  
Vol 775 ◽  
pp. 565-570 ◽  
Author(s):  
Xiaorong Zhang ◽  
Jing Guo ◽  
Xiaohui Zhang ◽  
Yuepeng Song ◽  
Zongxi Li ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Annealing Treatment ◽  
High Entropy Alloy ◽  
Nacl Solution ◽  
High Entropy

scholarly journals Influence of Aluminum and Molybdenum on the Microstructure and Corrosion Behavior of Thermally Sprayed High-Entropy Alloy Coatings

2021 ◽  
Author(s):  
Martin Löbel ◽  
Thomas Lindner ◽  
Maximilian Grimm ◽  
Lisa-Marie Rymer ◽  
Thomas Lampke
Keyword(s):  
Corrosion Resistance ◽  
Protective Coatings ◽  
Base Alloy ◽  
Alloy System ◽  
High Entropy Alloy ◽  
Oxide Content ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Structural And Functional Properties ◽  
Wide Range

AbstractHigh-entropy alloys (HEAs) have shown a wide range of promising structural and functional properties. By the application of coating technology, an economical exploitation can be achieved. The high wear and corrosion resistance of HEAs make them particularly interesting for the application as protective coatings. Especially for alloys with a high chromium content, a high corrosion resistance has been revealed. For the current investigations, the equimolar HEA CrFeCoNi with a single-phase face centered cubic structure is considered as a base alloy system. To increase the corrosion resistance as well as the hardness and strength, the influence of the alloying elements aluminum and molybdenum is analyzed. For the current investigations, the high kinetic process high-velocity oxygen fuel thermal spraying (HVOF) has been considered to produce coatings with a low porosity and oxide content. Feedstock is produced by inert gas atomization. The influence of the alloy composition on the microstructure, phase formation and resulting property profile is studied in detail. A detailed analysis of the corrosion resistance and underlying mechanisms is conducted. The pitting and passivation behavior are investigated by potentiodynamic polarization measurements in NaCl and H2SO4 electrolyte. A distinct improvement of the corrosion resistance can be achieved for the alloy Al0.3CrFeCoNiMo0.2.

Improvement of corrosion resistance and magnetic properties of FeCoNiAl0.2Si0.2 high entropy alloy via rapid-solidification

2020 ◽  
Vol 122 ◽  
pp. 106778 ◽  
Author(s):  
Chen Chen ◽  
Hang Zhang ◽  
Yanzhou Fan ◽  
Ran Wei ◽  
Weiwei Zhang ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Corrosion Resistance ◽  
Rapid Solidification ◽  
High Entropy Alloy ◽  
High Entropy
Sign in / Sign up

Export Citation Format

Share Document