Unburned material from biomass combustion as low-cost adsorbent for amoxicillin removal from wastewater

2021 ◽  
Vol 284 ◽  
pp. 124732
Author(s):  
Juan F. Saldarriaga ◽  
Natalia A. Montoya ◽  
Idoia Estiati ◽  
Andrés T. Aguayo ◽  
Roberto Aguado ◽  
...  
Keyword(s):  
Low Cost ◽  
Biomass Combustion ◽  
Amoxicillin Removal

New Type of Distributed Biomass Combustion Device Necessity and Feasibility in China

2011 ◽  
Vol 383-390 ◽  
pp. 4013-4016
Author(s):  
Chang Le Pang ◽  
Li Chen ◽  
Ren Jie Dong
Keyword(s):  
Rural Areas ◽  
High Efficiency ◽  
Low Cost ◽  
Biomass Combustion ◽  
Combustion System ◽  
Human Beings ◽  
New Type ◽  
Energy Products ◽  
The Ideal ◽  
Commercial Energy

Worldwide changes in climate and environment forced us human beings to seek for alternatives to replace commercial energy products like coal and petroleum. However, there have some difficulties to promote commercial energy products in China’s rural areas and newly urbanized areas. Biomass combustion system will become one of the ideal devices for such areas in a period of time. It is necessary to develop new types of biomass combustion system consisting of gasification or Semi-Gasification and combustion units so that it can provide high efficiency and low cost for household purposes.

scholarly journals Pulse Reverse Alloy Plating for Increased Lifetimes for Biocombustors

2019 ◽  
Author(s):  
Jing Xu ◽  
Tim Hall ◽  
Santosh Vijapur ◽  
DAN WANG ◽  
Jennings E. Taylor ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Thermal Energy ◽  
Low Cost ◽  
Base Material ◽  
High Temperature Corrosion ◽  
Biomass Energy ◽  
Biomass Combustion ◽  
Small Scale ◽  
Low Alloy Steels

Biomass embodies tremendous potential as a renewable energy resource. According to the biomass Thermal Energy Council (BTEC), biomass energy is renewable, carbon neutral, domestic and technologically mature. In addition, the low cost per BTU of wood chips and pellets relative to fossil fuels makes biomass an attractive thermal energy source. Furthermore, ~7% of global energy consumption comprises small-scale biomass combustion, representing a tremendous market for technologies that facilitate enhanced biomass utilization. However, a major challenge associated with utilization of biomass is its combustion behavior. The moisture content, chemical composition, and combustion efficiency varies depending on the source of biomass. Small scale biomass combustors (Figure 1) which for cost reasons are often constructed of mild or low-alloy steels, during operation are subjected to corrosive environments which include alkali halides (borne, e.g., by fly ash particulates), mineral/halogen acids and water; as well as various others such as sulfur and nitrogen oxides. There is a need to create more efficient, longer lasting, cleaner, and cost effective cookstoves for use in burning biomaterials. The materials used for cookstoves must improve burning efficiency, must be able to operate at higher temperatures, and should be low cost material systems to durably perform in the corrosive environments.Within this context, Faraday Technology Inc. is working on developing low cost and high value corrosion-resistant alloy coatings for existing bio-combustors or lower cost steels with the goal of increasing their functional lifetime, while reducing the component cost. The manufacturing process involves electrodeposition of binary/ternary/quaternary alloys consisting of [Ni/Co]-Cr-[Mo/Fe] onto a low cost substrate and subsequent accelerated high temperature corrosion evaluation. A wide array of electrolytes and processing parameters were evaluated in order to understand these effects on the deposit composition, structure, and high-temperature corrosion resistance properties towards the goal of developing an ideal alloy coating. Specifically, 100 wt% Cr, 7 wt% Co- 93 wt% Cr binary and 15 wt% Ni – 20 wt% Cr – 55 wt% Co (NiCoCr) ternary alloy coatings demonstrated enhanced corrosion resistance when exposed to an aggressive environment (~700°C, 1000 hr, coating surface salted with ~1 mg/cm2 every 100 hours). When compared to the SS base material the Cr/CoCr alloy coatings exhibited effective protection to the substrate and over 10 times lifetime improvement to its base material.

scholarly journals Using Solar-TiO2 and Biocarbon to Decompose and Adsorb Amoxicillin from Polluted Waters

2018 ◽  
Vol 10 (1) ◽  
pp. 131 ◽  
Author(s):  
Nilce Ortiz ◽  
Andre Silva ◽  
Giselle Natalia Silva Lima ◽  
Fernanda Pagano Hyppolito
Keyword(s):  
Bacterial Resistance ◽  
Low Cost ◽  
Water Discharge ◽  
Natural Material ◽  
Low Oxygen ◽  
Aquatic Life ◽  
Amoxicillin Removal ◽  
Solid Biomass ◽  
Polluted Waters ◽  
Treatment Application

Surface water discharge of domestic sewage poses a treat mostly due to antibiotics content as amoxicillin. Its environmental presence provides the bacterial resistance enhancement and disturbance in aquatic life. The biocarbon is an organic carbon compound obtained by biomass pyrolisis at 300oC to 750oC under low oxygen environment. It is an effective adsorbent derived from agricultural and industrial solid biomass also frequently used to remove various pollutants, including dyes, pesticides, organic compounds and heavy metals from aqueous solutions. The importance of this natural material rises as low cost abundant and renewable alternative to activated carbon used on wastewater treatment application. Several technologies are employed to modify crude precursors on biocarbon preparation including chemical, physical and biological treatments with the addition of functional groups. The raw biomass material also provides some radicals and humic acids with promising water adsorbent results. The integrated process of the efficient Solar-TiO2photodecomposition followed by biocarbon adsorption resulted on 94% of amoxicillin removal percentage and avoids the toxic treatment sludge production.

scholarly journals Biomass Combustion Control in Small and Medium-Scale Boilers Based on Low Cost Sensing the Trend of Carbon Monoxide Emissions

Processes ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 2030
Author(s):  
Jana Mižáková ◽  
Ján Piteľ ◽  
Alexander Hošovský ◽  
Ivan Pavlenko ◽  
Marek Ochowiak ◽  
...  
Keyword(s):  
Carbon Monoxide ◽  
Control System ◽  
Process Control ◽  
Block Diagram ◽  
Low Cost ◽  
Combustion Process ◽  
Quality Parameters ◽  
Biomass Combustion ◽  
The Real ◽  
Medium Scale

The article deals with the possibility of efficient control of small and medium-scale biomass-fired boilers by implementing low-cost sensors to sense the trend of carbon monoxide emissions into control of the biomass combustion process. Based on the theoretical analysis, a principle block diagram of the process control system was designed for the possibility of providing near-optimal control of the biomass combustion regardless of its quality parameters. A cost-effective hardware solution to obtain the dependence of CO emissions on O2 concentration in flue gas during combustion and new control algorithms was implemented into the process control and monitoring system of the biomass-fired boilers to test them in the real operation. A description of the designed control system, a data analysis of the monitored values and their impact on combustion process, and some results of the implemented control of the real biomass combustion process are presented in the article.

scholarly journals Biomass Combustion Control and Stabilization Using Low-Cost Sensors

2013 ◽  
Vol 5 ◽  
pp. 685157 ◽  
Author(s):  
Ján Piteľ ◽  
Jana Mižáková ◽  
Alexander Hošovský
Keyword(s):  
Low Cost ◽  
Biomass Combustion ◽  
Combustion Control

Electrodeposited Inconel and Stellite like Coatings for Improved Corrosion Resistance in Biocombustors

2018 ◽  
Author(s):  
Tim Hall ◽  
Santosh Vijapur ◽  
Jennings E. Taylor ◽  
Jing Xu ◽  
Maria Inman
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Thermal Energy ◽  
Low Cost ◽  
Base Material ◽  
High Temperature Corrosion ◽  
Biomass Combustion ◽  
Small Scale ◽  
Low Alloy Steels ◽  
Corrosive Environments

Biomass embodies tremendous potential as a renewable energy resource. According to the biomass thermal Energy Council (BTEC), biomass energy is renewable, carbon neutral, domestic and technologically mature. In addition, the low cost per BTU of wood chips and pellets relative to fossil fuels makes biomass an attractive thermal energy source. Furthermore, ~7% of global energy consumption comprises small-scale biomass combustion, representing a tremendous market for technologies that facilitate enhanced biomass utilization. However, a major challenge associated with utilization of biomass is its combustion behavior. The moisture content, chemical composition, and combustion efficiency varies depending on the source of biomass. Small scale biomass combustors, which for cost reasons are often constructed of mild or low-alloy steels, during operation are subjected to corrosive environments that include alkali halides (borne, e.g., by fly ash particulates), mineral/halogen acids and water; as well as various others such as sulfur and nitrogen oxides. There is a need to create more efficient, longer lasting, cleaner, and cost effective cookstoves for use in burning biomaterials. The materials used for cookstoves must improve burning efficiency, must be able operate at higher temperatures, and should be low cost material systems to durably perform in the corrosive environments. Within this context, Faraday Technology is working on developing low cost and high value corrosion-resistant alloy coatings for existing bio-combustors or lower cost steels with the goal of increasing their functional lifetime, while reducing the component cost. The manufacturing process involves electrodeposition of binary/ternary/quaternary alloys consisting of [Ni/Co]-Cr-[Mo/Fe] onto a low cost substrate and subsequent accelerated high temperature corrosion evaluation. A wide array of electrolytes and processing parameters were evaluated in order to understand these effects on the deposit composition, structure, and high-temperature corrosion resistance properties towards the goal of developing an ideal alloy coating. Specifically, 60 wt% Ni – 40 wt% Cr (NiCr) binary and 25 wt% Ni – 20 wt% Cr – 55 wt% Co (NiCoCr) ternary alloy coatings demonstrated enhanced corrosion resistance when exposed to an aggressive environment (~700°C, 1000 hr, coating surface salted with ~3 mg/cm2 every 100 hours). When compared to the SS base material the NiCr and NiCoCr alloy coatings exhibited a 70% lower weight loss and 3.4 times lifetime improvement over its base material.

Decomposition of the metastable beta titanium alloy Ti-15-3

1983 ◽  
Vol 41 ◽  
pp. 264-265
Author(s):  
Y. L. Chen ◽  
S. Fujlshiro
Keyword(s):  
Low Cost ◽  
High Strength ◽  
Alpha Phase ◽  
Thick Sheet ◽  
Omega Phase ◽  
Beta Titanium Alloy ◽  
Beta Titanium ◽  
Beta Matrix ◽  
Metastable Beta ◽  
Very High

Metastable beta titanium alloys have been known to have numerous advantages such as cold formability, high strength, good fracture resistance, deep hardenability, and cost effectiveness. Very high strength is obtainable by precipitation of the hexagonal alpha phase in a bcc beta matrix in these alloys. Precipitation hardening in the metastable beta alloys may also result from the formation of transition phases such as omega phase. Ti-15-3 (Ti-15V- 3Cr-3Al-3Sn) has been developed recently by TIMET and USAF for low cost sheet metal applications. The purpose of the present study was to examine the aging characteristics in this alloy.The composition of the as-received material is: 14.7 V, 3.14 Cr, 3.05 Al, 2.26 Sn, and 0.145 Fe. The beta transus temperature as determined by optical metallographic method was about 770°C. Specimen coupons were prepared from a mill-annealed 1.2 mm thick sheet, and solution treated at 827°C for 2 hr in argon, then water quenched. Aging was also done in argon at temperatures ranging from 316 to 616°C for various times.

Chromic Acid Etching of Polyethylene

1973 ◽  
Vol 31 ◽  
pp. 72-73
Author(s):  
J. D. Muzzy ◽  
R. D. Hester ◽  
J. L. Hubbard
Keyword(s):  
Chromic Acid ◽  
Low Cost ◽  
Acid Etching ◽  
Crystalline Morphology ◽  
Bulk Specimen ◽  
Morphological Studies ◽  
Perfect Form ◽  
Molecular Length ◽  
Lamellar Texture ◽  
Cost Studies

Polyethylene is one of the most important plastics produced today because of its good physical properties, ease of fabrication and low cost. Studies to improve the properties of polyethylene are leading to an understanding of its crystalline morphology. Polyethylene crystallized by evaporation from dilute solutions consists of thin crystals called lamellae. The polyethylene molecules are parallel to the thickness of the lamellae and are folded since the thickness of the lamellae is much less than the molecular length. This lamellar texture persists in less perfect form in polyethylene crystallized from the melt.Morphological studies of melt crystallized polyethylene have been limited due to the difficulty of isolating the microstructure from the bulk specimen without destroying or deforming it.

Glass Knife Geometry as Seen by the SEM

1971 ◽  
Vol 29 ◽  
pp. 454-455
Author(s):  
J. Temple Black
Keyword(s):  
Low Cost ◽  
Amorphous Material ◽  
Stress Concentrations ◽  
Basic Tool ◽  
Tool Materials ◽  
Optical Inspection ◽  
Surface Flaws ◽  
Slip Planes ◽  
Glass Knife ◽  
Diamond Knife

In ultramicrotomy, the two basic tool materials are glass and diamond. Glass because of its low cost and ease of manufacture of the knife itself is still widely used despite the superiority of diamond knives in many applications. Both kinds of knives produce plastic deformation in the microtomed section due to the nature of the cutting process and microscopic chips in the edge of the knife. Because glass has no well defined slip planes in its structure (it's an amorphous material), it is very strong and essentially never fails in compression. However, surface flaws produce stress concentrations which reduce the strength of glass to 10,000 to 20,000 psi from its theoretical or flaw free values of 1 to 2 million psi. While the microchips in the edge of the glass or diamond knife are generally too small to be observed in the SEM, the second common type of defect can be identified. This is the striations (also termed the check marks or feathers) which are always present over the entire edge of a glass knife regardless of whether or not they are visable under optical inspection. These steps in the cutting edge can be observed in the SEM by proper preparation of carefully broken knives and orientation of the knife, with respect to the scanning beam.

Sign in / Sign up

Export Citation Format

Share Document