Coupling ecological wastewater treatment with the production of livestock feed and irrigation water provides net benefits to human health and the environment: A life cycle assessment

2021 ◽  
Vol 288 ◽  
pp. 112361
Author(s):  
B. Roman ◽  
R.A. Brennan
Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6591 ◽  
Author(s):  
Shinji Takeshita ◽  
Hooman Farzaneh ◽  
Mehrnoosh Dashti

In this paper, a comprehensive life-cycle assessment (LCA) is carried out in order to evaluate the multiple environmental-health impacts of the biological wastewater treatment of the fish-processing industry throughout its life cycle. To this aim, the life-cycle impact assessment method based on endpoint modeling (LIME) was considered as the main LCA model. The proposed methodology is based on an endpoint modeling framework that uses the conjoint analysis to calculate damage factors for human health, social assets, biodiversity, and primary production, based on Indonesia’s local data inventory. A quantitative microbial risk assessment (QMRA) is integrated with the LIME modeling framework to evaluate the damage on human health caused by five major biological treatment technologies, including chemical-enhanced primary clarification (CEPC), aerobic-activated sludge (AS), up-flow anaerobic sludge blanket (UASB), ultrafiltration (UF) and reverse osmosis (RO) in this industry. Finally, a life-cycle costing (LCC) is carried out, considering all the costs incurred during the lifetime. The LCA results revealed that air pollution and gaseous emissions from electricity consumption have the most significant environmental impacts in all scenarios and all categories. The combined utilization of the UF and RO technologies in the secondary and tertiary treatment processes reduces the health damage caused by microbial diseases, which contributes significantly to reducing overall environmental damage.


ACS Omega ◽  
2020 ◽  
Vol 5 (42) ◽  
pp. 27733-27733
Author(s):  
Faiza Niaz ◽  
Qasim Khan ◽  
Mustafa Ali ◽  
Wenxing Shen

Author(s):  
V. Russo ◽  
A. E. Strever ◽  
H. J. Ponstein

Abstract Purpose Following the urgency to curb environmental impacts across all sectors globally, this is the first life cycle assessment of different wine grape farming practices suitable for commercial conventional production in South Africa, aiming at better understanding the potentials to reduce adverse effects on the environment and on human health. Methods An attributional life cycle assessment was conducted on eight different scenarios that reduce the inputs of herbicides and insecticides compared against a business as usual (BAU) scenario. We assess several impact categories based on ReCiPe, namely global warming potential, terrestrial acidification, freshwater eutrophication, terrestrial toxicity, freshwater toxicity, marine toxicity, human carcinogenic toxicity and human non-carcinogenic toxicity, human health and ecosystems. A water footprint assessment based on the AWARE method accounts for potential impacts within the watershed. Results and discussion Results show that in our impact assessment, more sustainable farming practices do not always outperform the BAU scenario, which relies on synthetic fertiliser and agrochemicals. As a main trend, most of the impact categories were dominated by energy requirements of wine grape production in an irrigated vineyard, namely the usage of electricity for irrigation pumps and diesel for agricultural machinery. The most favourable scenario across the impact categories provided a low diesel usage, strongly reduced herbicides and the absence of insecticides as it applied cover crops and an integrated pest management. Pesticides and heavy metals contained in agrochemicals are the main contributors to emissions to soil that affected the toxicity categories and impose a risk on human health, which is particularly relevant for the manual labour-intensive South African wine sector. However, we suggest that impacts of agrochemicals on human health and the environment are undervalued in the assessment. The 70% reduction of toxic agrochemicals such as Glyphosate and Paraquat and the 100% reduction of Chlorpyriphos in vineyards hardly affected the model results for human and ecotoxicity. Our concerns are magnified by the fact that manual labour plays a substantial role in South African vineyards, increasing the exposure of humans to these toxic chemicals at their workplace. Conclusions A more sustainable wine grape production is possible when shifting to integrated grape production practices that reduce the inputs of agrochemicals. Further, improved water and related electricity management through drip irrigation, deficit irrigation and photovoltaic-powered irrigation is recommendable, relieving stress on local water bodies, enhancing drought-preparedness planning and curbing CO2 emissions embodied in products.


2015 ◽  
Vol 26 (3) ◽  
pp. 389-406 ◽  
Author(s):  
Maria Francesca Milazzo ◽  
Francesco Spina

Purpose – The purpose of this paper is to quantify the human health impacts of soy-biodiesel production with the aim to discuss about its environmental sustainability. Design/methodology/approach – The integrated use of two current approaches, risk assessment (RA) and life cycle assessment (LCA), has allowed improvement of the potentialities of both in obtaining a more complete analysis. The implementation of a life cycle indicator for the assessment of the impacts on the human health, integrating the features of both approaches, is the main focus of this paper. Findings – It has been found that, although the biodiesel is a green fuel, it has some criticalities in its life cycle, which cannot be disregarded. In fact, even if biodiesel is essentially a clean fuel there are some phases, prior to the industrial phase, that can cause negative effects on human health and ecosystems. Practical implications – Results suggest some measures which can be adopted to substantially reduce human health impacts. Further alternative could be analysed in future to gain more insight about the use of biodiesel fuels. Originality/value – The estimation of the impacts of a process producing biodiesel has been made by using a novel approach. The novelty is associated with the calculation of the impacts on human health by using the transfer factors applied in RA. The use of such factors, properly modified in order to estimate the impacts on a wider scale than a site-dimension, allows defining a holistic approach, as LCA and RA are used as complete units but at the same time can be related to each other.


2014 ◽  
Vol 535 ◽  
pp. 346-349
Author(s):  
Mei Wang ◽  
Ming Yang ◽  
Jun Liu ◽  
Jian Fen Li

Effect and benefits of a product or service could be analyzed and evaluated by life cycle assessment during the whole life cycle. Urban sewage treatment plants could improve and control urban water pollution escalating, but it also had certain harm to environment. Effect and benefits of urban wastewater treatment plant A and B were analyzed and evaluated, 13 factors were selected, and comprehensive benefits were researched quantificationally using the method of analytic hierarchy process. It found that urban wastewater treatment plant A who applied A/O process had better benefits than urban wastewater treatment plant B who applied BIOLAK process.


2018 ◽  
Vol 913 ◽  
pp. 1018-1026
Author(s):  
Yan Qiong Sun ◽  
Yu Liu ◽  
Su Ping Cui

In this paper, a variety of blocks were grouped into the autoclaved blocks and fired blocks as far as the productive technology is concerned. In order to compare the life cycle impacts of the two kinds of the blocks, a life cycle assessment of two products on the functional unit 1m3 was carried out through the exploitation of mineral stage, transportation stage and the production of the blocks stage on the considering of the resource and energy consumption and the pollutant discharges. The results demonstrated that the fired blocks appeared to have less impact than autoclaved concrete blocks on human health, marine ecotoxicity toxicity and terrestrial ecotoxicity toxicity nearly 30%. The raw coal led to the serious impacts on the fossil depletion through the cement production stage of the autoclaved concrete blocks accounting for 45.86% and the gangue exploitation stage of the fired blocks accounting for 42.5%. Assessment of the data quality that the data was of pretty high or within the permission. The sensitivity analysis and contribution analysis assessment showed that the conclusion were robust.


Author(s):  
Farhad Sakhaee

Abstract: Life cycle assessment (LCA) is a tool to evaluate environmental impacts based on products of a process. This research is a case study of wastewater treatment facilities of ERTC (Environmental Resources Training Center), SIUE University, based on available data for two semi-annual sludge quantities (year 2015) from sludge management report. The aim of this study is to compare set of possibilities for a wastewater treatment facility at ERTC. The simulation has been done through SimaPro model. Electricity and methane were considered and the cumulative weight of their impacts has been investigated. Total solids for two semi-annual sludge has been fed to the model in kilogram and different production (electricity and methane) configuration were investigated. The most plausible configuration based on the cumulative environmental impact proposed as best practical solution.


2013 ◽  
Vol 04 (09) ◽  
pp. 1018-1033 ◽  
Author(s):  
Monica C. Rothermel ◽  
Amy E. Landis ◽  
William J. Barr ◽  
Kullapa Soratana ◽  
Kayla M. Reddington ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document