Hydraulic performance, consolidation characteristics and shear strength analysis of bentonites in the presence of fly-ash, sewage sludge and paper-mill leachates for landfill application

2022 ◽  
Vol 302 ◽  
pp. 113977
Author(s):  
Saswati Ray ◽  
Anil Kumar Mishra ◽  
Ajay S. Kalamdhad
Keyword(s):  
Shear Strength ◽  
Fly Ash ◽  
Sewage Sludge ◽  
Paper Mill ◽  
Hydraulic Performance ◽  
Strength Analysis

COMPRESSIVE STRENGTH ANALYSIS ON PROBLEMATIC SOILS STABILIZED WITH FLY ASH IN JORDAN

2018 ◽  
Vol 17 (8) ◽  
pp. 1855-1861
Author(s):  
Nicolae Taranu ◽  
Monther Abdelhadi ◽  
Ancuta Rotaru ◽  
Maria Gavrilescu
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Strength Analysis ◽  
Problematic Soils

scholarly journals Highly Effective Adsorption Process of Ni(II) Ions with the Use of Sewage Sludge Fly Ash Generated by Circulating Fluidized Bed Combustion (CFBC) Technology

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3106
Author(s):  
Tomasz Kalak ◽  
Kinga Marciszewicz ◽  
Joanna Piepiórka-Stepuk
Keyword(s):  
Fly Ash ◽  
Sewage Sludge ◽  
Fluidized Bed ◽  
Circulating Fluidized Bed ◽  
Municipal Sewage ◽  
Municipal Sewage Sludge ◽  
Fluidized Bed Combustion ◽  
Nickel Ions ◽  
Suitable Material ◽  
Circulating Fluidized Bed Combustion

Recently, more and more attention has been paid to the removal of nickel ions due to their negative effects on the environment and human health. In this research, fly ash obtained as a result of incineration of municipal sewage sludge with the use of circulating fluidized bed combustion (CFBC) technology was used to analyze the possibility of removing Ni(II) ions in adsorption processes. The properties of the material were determined using analytical methods, such as SEM-EDS, XRD, BET, BJH, thermogravimetry, zeta potential, SEM, and FT-IR. Several factors were analyzed, such as adsorbent dose, initial pH, initial concentration, and contact time. As a result of the conducted research, the maximum sorption efficiency was obtained at the level of 99.9%. The kinetics analysis and isotherms showed that the pseudo-second order equation model and the Freundlich isotherm model best suited this process. In conclusion, sewage sludge fly ash may be a suitable material for the effective removal of nickel from wastewater and the improvement of water quality. This research is in line with current trends in the concepts of circular economy and sustainable development.

Dried Municiple Sewage Sludge Gasification Experiment in Dual Fluidized Bed

2011 ◽  
Vol 383-390 ◽  
pp. 3799-3804
Author(s):  
Xiao Xu Fan ◽  
Lei Zhe Chu ◽  
Li Guo Yang
Keyword(s):  
Fly Ash ◽  
Sewage Sludge ◽  
Fluidized Bed ◽  
Calorific Value ◽  
Municipal Sewage ◽  
Municipal Sewage Sludge ◽  
Test Results ◽  
Leaching Toxicity ◽  
Dual Fluidized Bed ◽  
Hot Test

The fuel characteristics of municipal sewage sludge are suitable for dual fluidized bed(DFB) gasification, which can get middle calorific value gas through volatile pyrolysis, and reduce volume through char combustion. The hot test results of municipal sewage sludge on DFB rig were showen that the temperature distribution along combustor heigh is uniform, and the carbon content of fly ash is about 2~3%. In the experiment, with the increase of gasifier temperatrue, the more volatile of the sewage sludge was pyrolyzed. When the temperature of the gasifier reached 800°C, the calorific value of gas was 6.9MJ/Nm3; the emissions of SO2, NOx and HCl were appropriate to the standard. The leaching toxicity of heavy metal of the fly ash was lower than the discharge standard.

Direct Measurement of the Shear Strength of Fly Ash Powder Beds

2020 ◽  
Vol 8 (51) ◽  
pp. 18864-18868
Author(s):  
Nanami Aoki ◽  
Yohei Okada ◽  
Hidehiro Kamiya
Keyword(s):  
Shear Strength ◽  
Fly Ash ◽  
Direct Measurement

Ramie fiber reinforced composites with flame retardant structure design: flammability, smoke suppression, and mechanical properties

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Chenkai Zhu ◽  
Lei Nie ◽  
Xiaofei Yan ◽  
Jiawei Li ◽  
Dongming Qi
Keyword(s):  
Shear Strength ◽  
Iron Oxide ◽  
Heat Release ◽  
Flame Retardant ◽  
Interlaminar Shear Strength ◽  
Smoke Suppression ◽  
Strength Analysis ◽  
Ramie Fiber ◽  
Composite Surface ◽  
Interlaminar Shear

Abstract In this work, the structure of composite was designed as Core Stack and Surface Stack, which was treated with the expandable graphite (EG) and metal oxides such as iron oxide (IO), hydroxyapatite (HA), and aluminum tri-hydroxide (ATH). The mechanical performance of composites was characterized via flexural performance and interlaminar shear strength analysis. The flame retardance and smoke suppression of composite was explored in detail by LOI, UL-94, and cone calorimeter test. The findings presented that flexural properties of composites were observed to decrease due to delamination of surface stack, whilst no significant effect on interlaminar shear strength. In comparison with control composite, the loading of metal oxide into composite Surface Stack led to the reduction of peak heat release rate, total heat release, and fire growth index effectively. Moreover, the remarkable decrease in total smoke production could be observed due to the addition of iron oxide and the flame retardant mechanism was discussed. This study was the preliminary exploration of composite with flame retardant design which could be potential solution to improve flame retardancy and smoke suppression of composite with better mechanical structure preservation.

Metals removal from soil, fly ash and sewage sludge leachates by precipitation and dewatering properties of the generated sludge

2009 ◽  
Vol 172 (2-3) ◽  
pp. 1372-1382 ◽  
Author(s):  
Zied Djedidi ◽  
Médard Bouda ◽  
Med Aly Souissi ◽  
Ridha Ben Cheikh ◽  
Guy Mercier ◽  
...  
Keyword(s):  
Fly Ash ◽  
Sewage Sludge ◽  
Metals Removal
Sign in / Sign up

Export Citation Format

Share Document