Comparison of 2-Dimensional and 3-Dimensional Metacarpal Fracture Plating Constructs Under Cyclic Loading

2017 ◽  
Vol 42 (3) ◽  
pp. e159-e165 ◽  
Author(s):  
Eric P. Tannenbaum ◽  
Geoffrey T. Burns ◽  
Nikhil R. Oak ◽  
Jeffrey N. Lawton
Keyword(s):  
Cyclic Loading ◽  
Metacarpal Fracture ◽  
3 Dimensional

Stiffness Degradation of Digital Polypropylene Under Fatigue Loading: Investigations via 3-Dimensional Polyjet Printed Coupons

2020 ◽  
Author(s):  
Ravi Pratap Singh Tomar ◽  
Furkan I. Ulu ◽  
Ajit Kelkar ◽  
Ram V. Mohan
Keyword(s):  
Experimental Data ◽  
Regression Analysis ◽  
Fatigue Life ◽  
Cyclic Loading ◽  
Fatigue Loading ◽  
Stiffness Degradation ◽  
Damage State ◽  
3 Dimensional ◽  
Accumulated Damage ◽  
Polyjet Printing

Abstract The utilization of additively manufactured parts is gaining popularity in functional applications. Polymer-based additive manufacturing (AM) parts are utilized in a variety of engineering applications for automotive, aerospace, and energy. AM printed parts are however newer class of materials, and structural performance of these materials is not fully understood completely, and very limited exists currently on precisely performance of Polyjet printed parts and associated digital materials under fatigue loading. This paper investigates the stiffness degradation under tension-tension fatigue loading of digital polypropylene using homogenous 3-Dimensional test coupons formed using PolyJet printing. Homogeneous 3-Dimensional test configuration employed in the present study eliminates the process-induced limitations of traditional ASTM D638 2D fatigue test coupons for AM processed materials. Fatigue data is analyzed to present an empirical model of effective elastic modulus and an analytical model of the accumulated damage state, as defined on the basis of stiffness degradation during cyclic loading. Further, the actual damage accumulation due to cyclic loading with the predicted model is compared. Modeling of the S-N diagram provides a better estimation of fatigue life and fatigue life modeling of AM printed test coupons and is obtained via linear regression analysis of experimental data with high correlation coefficient R2 (0.9971). The analytical model of the accumulated damage state is based on the stiffness degradation and is derived from the regression analysis of experimental data of stiffness degradation at different loading percentages assuming a polynomial of degree 4. Present study provides insight into the fatigue damage state and cyclic performance of digital polypropylene from Polyjet printing.

scholarly journals Analytical Study on Shear Performance of 3-Dimensional RC Beam-Column Joints Subjected to Bi-Directional Cyclic Loading

2014 ◽  
Vol 25 (0) ◽  
pp. 65-73 ◽  
Author(s):  
Hongchen Sun ◽  
Takashi Kashiwazaki ◽  
Nobuyuki Izumi ◽  
Hiroshi Noguchi
Keyword(s):  
Cyclic Loading ◽  
Analytical Study ◽  
Rc Beam ◽  
3 Dimensional ◽  
Shear Performance

A biomechanical study comparing plate fixation using unicortical and bicortical screws in transverse metacarpal fracture models subjected to cyclic loading

2011 ◽  
Vol 37 (5) ◽  
pp. 396-401 ◽  
Author(s):  
R. Afshar ◽  
T. S. Fong ◽  
M. Hadi Latifi ◽  
S. R. Kanthan ◽  
T. Kamarul
Keyword(s):  
Cyclic Loading ◽  
Static Loading ◽  
Screw Fixation ◽  
Plate Fixation ◽  
Biomechanical Study ◽  
Metacarpal Fracture ◽  
Three Point Bending ◽  
Load To Failure ◽  
Fracture Models ◽  
The Mean

The use of bicortical screws to fix metacarpal fractures has been suggested to provide no added biomechanical advantage over unicortical screw fixation. However, this was only demonstrated in static loading regimes, which may not be representative of biological conditions. The present study was done to determine whether similar outcomes are obtained when cyclic loading is applied. Transverse midshaft osteotomies were created in 20 metacarpals harvested from three cadavers. Fractures were stabilised using 2.0 mm mini fragment plates fixed with either bicortical or unicortical screw fixation. These fixations were tested to failure with a three-point bending cyclic loading protocol using an electromechanical microtester and a 1 kN load cell. The mean load to failure was 370 N (SD 116) for unicortical fixation and 450 N (SD 135) for bicortical fixation. Significant differences between these two constructs were observed. A biomechanical advantage was found when using bicortical screws in metacarpal fracture plating.

Three-Dimensional Reconstruction Using Stereo Pairs from Serial Thick Sections

1977 ◽  
Vol 35 ◽  
pp. 562-563
Author(s):  
Robert Glaeser ◽  
Thomas Bauer ◽  
David Grano
Keyword(s):  
Three Dimensional ◽  
Dimensional Structure ◽  
Serial Sections ◽  
Thin Sections ◽  
3 Dimensional ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Dimensional Reconstruction ◽  
Stereo Imagery ◽  
Whole Mounts

In transmission electron microscopy, the 3-dimensional structure of an object is usually obtained in one of two ways. For objects which can be included in one specimen, as for example with elements included in freeze- dried whole mounts and examined with a high voltage microscope, stereo pairs can be obtained which exhibit the 3-D structure of the element. For objects which can not be included in one specimen, the 3-D shape is obtained by reconstruction from serial sections. However, without stereo imagery, only detail which remains constant within the thickness of the section can be used in the reconstruction; consequently, the choice is between a low resolution reconstruction using a few thick sections and a better resolution reconstruction using many thin sections, generally a tedious chore. This paper describes an approach to 3-D reconstruction which uses stereo images of serial thick sections to reconstruct an object including detail which changes within the depth of an individual thick section.

Structural preservation and absolute contrast of catalase crystal sections prepared with tannic acid

1983 ◽  
Vol 41 ◽  
pp. 448-449
Author(s):  
C.W. Akey ◽  
M. Szalay ◽  
S.J. Edelstein
Keyword(s):  
Tannic Acid ◽  
Beef Heart ◽  
X Rays ◽  
Screw Axis ◽  
General Applicability ◽  
Thin Sections ◽  
Beef Liver ◽  
3 Dimensional ◽  
Dimensional Reconstruction ◽  
Structural Preservation

Three methods of obtaining 20 Å resolution in sectioned protein crystals have recently been described. They include tannic acid fixation, low temperature embedding and grid sectioning. To be useful for 3-dimensional reconstruction thin sections must possess suitable resolution, structural fidelity and a known contrast. Tannic acid fixation appears to satisfy the above criteria based on studies of crystals of Pseudomonas cytochrome oxidase, orthorhombic beef liver catalase and beef heart F1-ATPase. In order to develop methods with general applicability, we have concentrated our efforts on a trigonal modification of catalase which routinely demonstrated a resolution of 40 Å. The catalase system is particularly useful since a comparison with the structure recently solved with x-rays will permit evaluation of the accuracy of 3-D reconstructions of sectioned crystals.Initially, we re-evaluated the packing of trigonal catalase crystals studied by Longley. Images of the (001) plane are of particular interest since they give a projection down the 31-screw axis in space group P3121. Images obtained by the method of Longley or by tannic acid fixation are negatively contrasted since control experiments with orthorhombic catalase plates yield negatively stained specimens with conditions used for the larger trigonal crystals.

Deviations from Ideal Decagonal Symmetry in Electron Diffraction Patterns of the “Decagonal” Phase in the Al-Co-Cu Alloy System

1991 ◽  
Vol 49 ◽  
pp. 914-915
Author(s):  
Atul S. Ramani ◽  
Earle R. Ryba ◽  
Paul R. Howell
Keyword(s):  
Electron Microscope ◽  
Alloy System ◽  
Nominal Composition ◽  
Dimensional Lattice ◽  
3 Dimensional ◽  
Decagonal Phase ◽  
Cu Alloy ◽  
Transmission Electron ◽  
Lattice Periodicity ◽  
Diffraction Patterns

The “decagonal” phase in the Al-Co-Cu system of nominal composition Al65CO15Cu20 first discovered by He et al. is especially suitable as a topic of investigation since it has been claimed that it is thermodynamically stable and is reported to be periodic in the dimension perpendicular to the plane of quasiperiodic 10-fold symmetry. It can thus be expected that it is an important link between fully periodic and fully quasiperiodic phases. In the present paper, we report important findings of our transmission electron microscope (TEM) study that concern deviations from ideal decagonal symmetry of selected area diffraction patterns (SADPs) obtained from several “decagonal” phase crystals and also observation of a lattice of main reflections on the 10-fold and 2-fold SADPs that implies complete 3-dimensional lattice periodicity and the fundamentally incommensurate nature of the “decagonal” phase. We also present diffraction evidence for a new transition phase that can be classified as being one-dimensionally quasiperiodic if the lattice of main reflections is ignored.

A Novel Reconstitution Method for Inducing the Formation of Regular 2-Dimensional Arrays of Membrane Proteins and Lipids

1988 ◽  
Vol 46 ◽  
pp. 152-153 ◽  
Author(s):  
A. Engel ◽  
A. Holzenburg ◽  
K. Stauffer ◽  
J. Rosenbusch ◽  
U. Aebi
Keyword(s):  
Membrane Proteins ◽  
Flow Rate ◽  
Lipid Membranes ◽  
Functional Characterization ◽  
Dimensional Structure ◽  
Electron Crystallography ◽  
Peltier Element ◽  
Protein Ratio ◽  
Precise Control ◽  
3 Dimensional

Reconstitution of solubilized and purified membrane proteins in the presence of phospholipids into vesicles allows their functions to be studied by simple bulk measurements (e.g. diffusion of differently sized solutes) or by conductance measurements after transformation into planar membranes. On the other hand, reconstitution into regular protein-lipid arrays, usually forming at a specific lipid-to-protein ratio, provides the basis for determining the 3-dimensional structure of membrane proteins employing the tools of electron crystallography.To refine reconstitution conditions for reproducibly inducing formation of large and highly ordered protein-lipid membranes that are suitable for both electron crystallography and patch clamping experiments aimed at their functional characterization, we built a flow-dialysis device that allows precise control of temperature and flow-rate (Fig. 1). The flow rate is generated by a peristaltic pump and can be adjusted from 1 to 500 ml/h. The dialysis buffer is brought to a preselected temperature during its travel through a meandering path before it enters the dialysis reservoir. A Z-80 based computer controls a Peltier element allowing the temperature profile to be programmed as function of time.

Structure and Interaction of Protamine by Dark Field Electron Microscopy

1976 ◽  
Vol 34 ◽  
pp. 160-161
Author(s):  
D.P. Bazett-Jones ◽  
F.P. Ottensmeyer
Keyword(s):  
Electron Microscopy ◽  
Dark Field ◽  
Amino Acid Sequences ◽  
Dimensional Structure ◽  
3 Dimensional ◽  
Field Electron ◽  
Proposed Model ◽  
Field Electron Microscopy ◽  
Dark Field Electron ◽  
Positively Charged

It has been shown for some time that it is possible to obtain images of small unstained proteins, with a resolution of approximately 5Å using dark field electron microscopy (1,2). Applying this technique, we have observed a uniformity in size and shape of the 2-dimensional images of pure specimens of fish protamines (salmon, herring (clupeine, Y-l) and rainbow trout (Salmo irideus)). On the basis of these images, a model for the 3-dimensional structure of the fish protamines has been proposed (2).The known amino acid sequences of fish protamines show stretches of positively charged arginines, separated by regions of neutral amino acids (3). The proposed model for protamine structure (2) consists of an irregular, right-handed helix with the segments of adjacent arginines forming the loops of the coil.

Design and calibration of an IVEM for general 3-dimensional imaging of non-diffracting materials

1992 ◽  
Vol 50 (2) ◽  
pp. 1040-1041
Author(s):  
Neil Rowlands ◽  
Jeff Price ◽  
Michael Kersker ◽  
Seichi Suzuki ◽  
Steve Young ◽  
...  
Keyword(s):  
3D Imaging ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3 Dimensional ◽  
3D Microstructure ◽  
Image Translation ◽  
Digital Correlation ◽  
On Line ◽  
Mechanical Stage ◽  
Projection Angle

Three-dimensional (3D) microstructure visualization on the electron microscope requires that the sample be tilted to different positions to collect a series of projections. This tilting should be performed rapidly for on-line stereo viewing and precisely for off-line tomographic reconstruction. Usually a projection series is collected using mechanical stage tilt alone. The stereo pairs must be viewed off-line and the 60 to 120 tomographic projections must be aligned with fiduciary markers or digital correlation methods. The delay in viewing stereo pairs and the alignment problems in tomographic reconstruction could be eliminated or improved by tilting the beam if such tilt could be accomplished without image translation.A microscope capable of beam tilt with simultaneous image shift to eliminate tilt-induced translation has been investigated for 3D imaging of thick (1 μm) biologic specimens. By tilting the beam above and through the specimen and bringing it back below the specimen, a brightfield image with a projection angle corresponding to the beam tilt angle can be recorded (Fig. 1a).

4-dimensional, high-resolution imaging of living cells

1992 ◽  
Vol 50 (1) ◽  
pp. 416-417
Author(s):  
Shinya Inoué
Keyword(s):  
Light Microscope ◽  
Living Cells ◽  
Live Cells ◽  
Video Tape ◽  
Active Living ◽  
High Resolution Imaging ◽  
3 Dimensional ◽  
Dynamic Architecture ◽  
Resolution Imaging ◽  
Disk Memory

This paper reports progress of our effort to rapidly capture, and display in time-lapsed mode, the 3-dimensional dynamic architecture of active living cells and developing embryos at the highest resolution of the light microscope. Our approach entails: (A) real-time video tape recording of through-focal, ultrathin optical sections of live cells at the highest resolution of the light microscope; (B) repeat of A at time-lapsed intervals; (C) once each time-lapsed interval, an image at home focus is recorded onto Optical Disk Memory Recorder (OMDR); (D) periods of interest are selected using the OMDR and video tape records; (E) selected stacks of optical sections are converted into plane projections representing different view angles (±4 degrees for stereo view, additional angles when revolving stereos are desired); (F) analysis using A - D.

Sign in / Sign up

Export Citation Format

Share Document