Preservation of diversity and oenological properties of wine yeasts during long-term laboratory maintenance: A study of strains of a century-old Tokaj wine yeast collection

LWT ◽  
2019 ◽  
Vol 101 ◽  
pp. 789-798 ◽  
Author(s):  
Zoltán Kállai ◽  
Walter P. Pfliegler ◽  
Judit Mitercsák ◽  
Gergő Szendei ◽  
Matthias Sipiczki
Genes ◽  
2020 ◽  
Vol 11 (5) ◽  
pp. 576 ◽  
Author(s):  
Gabriela Betlej ◽  
Ewelina Bator ◽  
Bernadetta Oklejewicz ◽  
Leszek Potocki ◽  
Anna Górka ◽  
...  

Industrial wine yeasts owe their adaptability in constantly changing environments to a long evolutionary history that combines naturally occurring evolutionary events with human-enforced domestication. Among the many stressors associated with winemaking processes that have potentially detrimental impacts on yeast viability, growth, and fermentation performance are hyperosmolarity, high glucose concentrations at the beginning of fermentation, followed by the depletion of nutrients at the end of this process. Therefore, in this study, we subjected three widely used industrial wine yeasts to adaptive laboratory evolution under potassium chloride (KCl)-induced osmotic stress. At the end of the evolutionary experiment, we evaluated the tolerance to high osmotic stress of the evolved strains. All of the analyzed strains improved their fitness under high osmotic stress without worsening their economic characteristics, such as growth rate and viability. The evolved derivatives of two strains also gained the ability to accumulate glycogen, a readily mobilized storage form of glucose conferring enhanced viability and vitality of cells during prolonged nutrient deprivation. Moreover, laboratory-scale fermentation in grape juice showed that some of the KCl-evolved strains significantly enhanced glycerol synthesis and production of resveratrol-enriched wines, which in turn greatly improved the wine sensory profile. Altogether, these findings showed that long-term adaptations to osmotic stress can be an attractive approach to develop industrial yeasts.


2007 ◽  
Vol 73 (8) ◽  
pp. 2432-2439 ◽  
Author(s):  
Carole Guillaume ◽  
Pierre Delobel ◽  
Jean-Marie Sablayrolles ◽  
Bruno Blondin

ABSTRACT Fructose utilization by wine yeasts is critically important for the maintenance of a high fermentation rate at the end of alcoholic fermentation. A Saccharomyces cerevisiae wine yeast able to ferment grape must sugars to dryness was found to have a high fructose utilization capacity. We investigated the molecular basis of this enhanced fructose utilization capacity by studying the properties of several hexose transporter (HXT) genes. We found that this wine yeast harbored a mutated HXT3 allele. A functional analysis of this mutated allele was performed by examining expression in an hxt1-7Δ strain. Expression of the mutated allele alone was found to be sufficient for producing an increase in fructose utilization during fermentation similar to that observed in the commercial wine yeast. This work provides the first demonstration that the pattern of fructose utilization during wine fermentation can be altered by expression of a mutated hexose transporter in a wine yeast. We also found that the glycolytic flux could be increased by overexpression of the mutant transporter gene, with no effect on fructose utilization. Our data demonstrate that the Hxt3 hexose transporter plays a key role in determining the glucose/fructose utilization ratio during fermentation.


2013 ◽  
Vol 80 (2) ◽  
pp. 704-713 ◽  
Author(s):  
Estéfani García-Ríos ◽  
Alicia Gutiérrez ◽  
Zoel Salvadó ◽  
Francisco Noé Arroyo-López ◽  
José Manuel Guillamon

ABSTRACTThe effect of the main environmental factors governing wine fermentation on the fitness of industrial yeast strains has barely received attention. In this study, we used the concept of fitness advantage to measure how increasing nitrogen concentrations (0 to 200 mg N/liter), ethanol (0 to 20%), and temperature (4 to 45°C) affects competition among four commercial wine yeast strains (PDM, ARM, RVA, and TTA). We used a mathematical approach to model the hypothetical time needed for the control strain (PDM) to out-compete the other three strains in a theoretical mixed population. The theoretical values obtained were subsequently verified by competitive mixed fermentations in both synthetic and natural musts, which showed a good fit between the theoretical and experimental data. Specifically, the data show that the increase in nitrogen concentration and temperature values improved the fitness advantage of the PDM strain, whereas the presence of ethanol significantly reduced its competitiveness. However, the RVA strain proved to be the most competitive yeast for the three enological parameters assayed. The study of the fitness of these industrial strains is of paramount interest for the wine industry, which uses them as starters of their fermentations. Here, we propose a very simple method to model the fitness advantage, which allows the prediction of the competitiveness of one strain with respect to different abiotic factors.


Author(s):  
Zoltán Kállai ◽  
Zsuzsa Antunovics ◽  
Gyula Oros

The dynamics of ethanol production of wine yeasts were examined in model experiments as well as in the winery. The ethanol concentration in young wines fermented by local strains of Saccharomyces cerevisiae, S. uvarumor Starmerella bacillaris (21, 2 and 2, respectively) did not vary considerably (c.v. 1.9 %). All of them produced significantly higher amount of ethanol than the type strain [ATCC 26108] of S. cerevisiae. However, their performance during the fermentation process diverged significantly. Thus the lag phase varied between 33 and 123 hours, while the time requested to produce half of the final ethanol concentration varied between 67 and 294 hours.


Fermentation ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 5
Author(s):  
Alice Vilela

Modern industrial winemaking is based on the use of specific starters of wine strains. Commercial wine strains present several advantages over natural isolates, and it is their use that guarantees the stability and reproducibility of industrial winemaking technologies. For the highly competitive wine market with new demands for improved wine quality and wine safety, it has become increasingly critical to develop new yeast strains. In the last decades, new possibilities arose for creating upgraded wine yeasts in the laboratory, resulting in the development of strains with better fermentation abilities, able to improve the sensory quality of wines and produce wines targeted to specific consumers, considering their health and nutrition requirements. However, only two genetically modified (GM) wine yeast strains are officially registered and approved for commercial use. Compared with traditional genetic engineering methods, CRISPR/Cas9 is described as efficient, versatile, cheap, easy-to-use, and able to target multiple sites. This genetic engineering technique has been applied to Saccharomyces cerevisiae since 2013. In this review, we aimed to overview the use of CRISPR/Cas9 editing technique in wine yeasts to combine develop phenotypes able to increase flavor compounds in wine without the development of off-flavors and aiding in the creation of “safer wines.”


1987 ◽  
Vol 33 (2) ◽  
pp. 112-117 ◽  
Author(s):  
Rosanne Eustace ◽  
R. J. Thornton

Wines that are lacking in body may be improved by the presence of greater amounts of glycerol. Wine yeast strains vary in their ability to produce glycerol. A programme of hybridizing yeast strains while selecting for increased production of glycerol was undertaken. Three generations of hybridization resulted in yeast strains which produced 10–11 g glycerol/L compared with 3.0–6.6 g/L produced by the wine yeast strains of the original breeding stock. Industrial-scale winemaking confirmed the ability of two hybrid strains to produce similar amounts of glycerol to those observed in laboratory-scale fermentations. The activity of the enzyme glycerol-3-phosphate dehydrogenase was measured in crude extracts of two breeding stock wine yeasts and in two final generation hybrid strains. The observed activities were lower in the products of the hybridization programme than in the original wine yeast strains. Two alternative explanations are suggested. (i) Selective hybridization may select for the alleles of the gene which codes for an alcohol dehydrogenase I isozyme which has a lower activity resulting in increased glycerol production. (ii) Phospholipid synthesis is reduced and the glycerol-3-phosphate, which is the major precursor of phospholipids in yeasts, accumulates as glycerol.


2009 ◽  
Vol 55 (8) ◽  
pp. 990-1002 ◽  
Author(s):  
Heidi Schoeman ◽  
Gideon M. Wolfaardt ◽  
Alfred Botha ◽  
Pierre van Rensburg ◽  
Isak S. Pretorius

The use and release of genetically modified organisms (GMOs) is an issue of intense public concern and, in the case of food and beverages, products containing GMOs or products thereof carry the risk of consumer rejection. The recent commercialization of 2 GM wine yeasts in the United States and Canada has made research and development of risk assessments for GM microorganisms a priority. The purpose of this study was to take a first step in establishing a risk-assessment process for future use and potential release of GM wine yeasts into the environment. The behaviour and spread of a GM wine yeast was monitored in saturated sand columns, saturated sand flow cells, and conventional flow cells. A widely used commercial Saccharomyces cerevisiae wine yeast, VIN13, a VIN13 transgenic strain (LKA1, which carries the LKA1 α-amylase gene of Lipomyces kononenkoae ), a soil bacterium ( Dyadobacter fermentens ), and a nonwine soil-borne yeast ( Cryptococcus laurentii ) were compared in laboratory-scale microcosm systems designed to monitor microbial mobility behaviour, survival, and attachment to surfaces. It was found that LKA1 cells survived in saturated sand columns, but showed little mobility in the porous matrix, suggesting that the cells attached with high efficiency to sand. There was no significant difference between the mobility patterns of LKA1 and VIN13. All 3 yeasts (VIN13, LKA1, and C. laurentii) were shown to form stable biofilms; the 2 S. cerevisiae strains either had no difference in biofilm density or the LKA1 biofilm was less dense than that of VIN13. When co-inoculated with C. laurentii, LKA1 had no negative influence on the breakthrough of the Cryptococcus yeast in a sand column or on its ability to form biofilms. In addition, LKA1 did not successfully integrate into a stable mixed-biofilm community, nor did it disrupt the biofilm community. Overall, it was concluded that the LKA1 transgenic yeast had the same reproductive success as VIN13 in these 3 microcosms and had no selective advantage over the untransformed parental strain.


2015 ◽  
Vol 44 ◽  
pp. 10-14
Author(s):  
Ecaterina Lengyel

The present study aims at isolating, identifying and selecting autochthonous wine yeast strains with a view to establish a crop bank specific to the Apold area. 569 wine yeast strains were isolated during the alcoholic fermentation of must from the Apold area, 458 were identified through cultural methods and with the help of the API 20 C AUX test (Biomeriux, France). Six yeast strains (A87, A169, A296, A314, A132 and A413) were genetically identified through the PCR-ITS RFLP method of the 5.8S-ITS segment; the resulting four strains were Saccharomyces cerevisiae - A87, A169, A296, A314 - and two Saccharomyces bayanus strains - A132 și A413. The strains we identified constitute a base for the multiplication of indigenous species with a view to obtain authentic wines that are typical to their area of origin.


Sign in / Sign up

Export Citation Format

Share Document