Research on natural vibration responses based on asymmetrical dual-rotor model

2022 ◽  
Vol 167 ◽  
pp. 104563
Author(s):  
Zhu Han ◽  
Jun Liu ◽  
Jianen Chen
Keyword(s):  
Natural Vibration ◽  
Vibration Responses ◽  
Rotor Model

Roll-Yaw Coupling Effect of Jeffcott Rotor With Breathing Crack

2015 ◽  
Author(s):  
J. Zhao ◽  
H. A. DeSmidt ◽  
M. Peng ◽  
W. Yao
Keyword(s):  
Coupling Effect ◽  
Rotor System ◽  
Crack Model ◽  
Breathing Crack ◽  
Cracked Rotor ◽  
Lagrange Principle ◽  
Jeffcott Rotor ◽  
Vibration Responses ◽  
Cracked Rotor System ◽  
Rotor Model

A new rotor model is developed in this paper to explore the dynamic coupling effect of roll-yaw motion. The rotor model employs a 6 degree-of-freedom Jeffcott rotor with a breathing crack. Based on the energy method and Lagrange principle, equation of motion is derived in yawing coordinate system with consideration of unbalance mass. The breathing crack model is established by Zero Stress Intensity Factor (SIF) method based on the crack released strain energy concept in fracture mechanics. SIF method is used to determine the crack closure line by computing SIF for opening mode. The vibration responses of the cracked rotor system are solved by Gear’s method. The coupling effect of yawing and rolling motion is studied in this paper to investigate vibration response of cracked rotor system. With the yawing motion, the dynamics of the rotor-bearing system is changed by additional stiffness and force terms. The parametric study is conducted to analyze the effect of yawing rate and acceleration on the crack breathing behavior. Finally, the vibration responses of the nominal and damaged rotor systems are analyzed to find out the indication for the damage detection and health monitoring.

Roll-Yaw Coupled Vibration of the Rotor System With Breathing Crack and Unbalance Mass

2015 ◽  
Author(s):  
J. Zhao ◽  
H. A. DeSmidt ◽  
M. Peng ◽  
W. Yao
Keyword(s):  
Coupling Effect ◽  
Rotor System ◽  
Crack Model ◽  
Clear Understanding ◽  
Coupled Vibration ◽  
Breathing Crack ◽  
Energy Concept ◽  
Vibration Responses ◽  
Rolling Rate ◽  
Rotor Model

This paper develops a new finite element rotor model with consideration of the coupling effect of rolling and yawing motion. The crack model is built using released strain energy concept in fracture mechanics. The nonlinear breathing behavior of cracks on the rotor shaft is simulated through Zero Stress Intensity Factor (SIF) method. The vibration responses of rotor system are solved by Newmark Integration method for both nominal and damaged system. With the yawing motion, the additional force will be induced for beam element and center disk. Incorporated with breathing crack model, the breathing behavior of crack is comprehensively studied in terms of the rolling rate, yawing rate and yawing acceleration. The clear understanding of crack breathing behavior is beneficial for the damage detection and health monitoring of the rotor system.

An hourglass-type electromagnetic isolator with negative resistance electromagnetic shunt circuit

2020 ◽  
Vol 64 (1-4) ◽  
pp. 549-556
Author(s):  
Yajun Luo ◽  
Linwei Ji ◽  
Yahong Zhang ◽  
Minglong Xu ◽  
Xinong Zhang
Keyword(s):  
Vibration Isolation ◽  
Electromechanical Coupling ◽  
Coupling Effect ◽  
Negative Resistance ◽  
Isolation System ◽  
Amplitude Vibration ◽  
Vibration Responses ◽  
The Stability ◽  
Isolation Performance ◽  
Shunt Circuit

The present work proposed an hourglass-type electromagnetic isolator with negative resistance (NR) shunt circuit to achieve the effective suppression of the micro-amplitude vibration response in various advanced instruments and equipment. By innovatively design of combining the displacement amplifier and the NR electromagnetic shunt circuit, the current new type of vibration isolator not only can effectively solve the problem of micro-amplitude vibration control, but also has significant electromechanical coupling effect, to obtain excellent vibration isolation performance. The design of the isolator and motion relationship is presented firstly. The electromechanical coupling dynamic model of the isolator is also given. Moreover, the optimal design of the NR electromagnetic shunt circuit and the stability analysis of the vibration isolation system are carried out. Finally, the simulation results about the transfer function and vibration responses demonstrated that the isolator has a significant isolation performance.

scholarly journals Spatially Resolved Experimental Modal Analysis on High-Speed Composite Rotors Using a Non-Contact, Non-Rotating Sensor

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4705
Author(s):  
Julian Lich ◽  
Tino Wollmann ◽  
Angelos Filippatos ◽  
Maik Gude ◽  
Juergen Czarske ◽  
...  
Keyword(s):  
High Speed ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Fiber Reinforced ◽  
Structural Dynamic ◽  
Spatially Resolved ◽  
Glass Fiber Reinforced ◽  
Vibration Responses ◽  
And Performance

Due to their lightweight properties, fiber-reinforced composites are well suited for large and fast rotating structures, such as fan blades in turbomachines. To investigate rotor safety and performance, in situ measurements of the structural dynamic behaviour must be performed during rotating conditions. An approach to measuring spatially resolved vibration responses of a rotating structure with a non-contact, non-rotating sensor is investigated here. The resulting spectra can be assigned to specific locations on the structure and have similar properties to the spectra measured with co-rotating sensors, such as strain gauges. The sampling frequency is increased by performing consecutive measurements with a constant excitation function and varying time delays. The method allows for a paradigm shift to unambiguous identification of natural frequencies and mode shapes with arbitrary rotor shapes and excitation functions without the need for co-rotating sensors. Deflection measurements on a glass fiber-reinforced polymer disk were performed with a diffraction grating-based sensor system at 40 measurement points with an uncertainty below 15 μrad and a commercial triangulation sensor at 200 measurement points at surface speeds up to 300 m/s. A rotation-induced increase of two natural frequencies was measured, and their mode shapes were derived at the corresponding rotational speeds. A strain gauge was used for validation.

Exact solution by dynamic stiffness method for the natural vibration of porous functionally graded plate considering neutral surface

2021 ◽  
pp. 146442072098817
Author(s):  
Md. Imran Ali ◽  
Mohammad Sikandar Azam
Keyword(s):  
Power Law ◽  
Functionally Graded Material ◽  
Stiffness Matrix ◽  
Natural Vibration ◽  
Dynamic Stiffness ◽  
Functionally Graded ◽  
Neutral Surface ◽  
Functionally Graded Plate ◽  
Dynamic Stiffness Matrix ◽  
Graded Material

This paper presents the formulation of dynamic stiffness matrix for the natural vibration analysis of porous power-law functionally graded Levy-type plate. In the process of formulating the dynamic stiffness matrix, Kirchhoff-Love plate theory in tandem with the notion of neutral surface has been taken on board. The developed dynamic stiffness matrix, a transcendental function of frequency, has been solved through the Wittrick–Williams algorithm. Hamilton’s principle is used to obtain the equation of motion and associated natural boundary conditions of porous power-law functionally graded plate. The variation across the thickness of the functionally graded plate’s material properties follows the power-law function. During the fabrication process, the microvoids and pores develop in functionally graded material plates. Three types of porosity distributions are considered in this article: even, uneven, and logarithmic. The eigenvalues computed by the dynamic stiffness matrix using Wittrick–Williams algorithm for isotropic, power-law functionally graded, and porous power-law functionally graded plate are juxtaposed with previously referred results, and good agreement is found. The significance of various parameters of plate vis-à-vis aspect ratio ( L/b), boundary conditions, volume fraction index ( p), porosity parameter ( e), and porosity distribution on the eigenvalues of the porous power-law functionally graded plate is examined. The effect of material density ratio and Young’s modulus ratio on the natural vibration of porous power-law functionally graded plate is also explained in this article. The results also prove that the method provided in the present work is highly accurate and computationally efficient and could be confidently used as a reference for further study of porous functionally graded material plate.

Sign in / Sign up

Export Citation Format

Share Document