scholarly journals Silk fibroin nanofibers: a promising ink additive for extrusion three-dimensional bioprinting

2020 ◽  
Vol 8 ◽  
pp. 100078 ◽  
Author(s):  
S. Sakai ◽  
A. Yoshii ◽  
S. Sakurai ◽  
K. Horii ◽  
O. Nagasuna
Keyword(s):  
Silk Fibroin ◽  
Three Dimensional ◽  
Silk Fibroin Nanofibers

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

scholarly journals Comparative Study of Silk Fibroin-Based Hydrogels and Their Potential as Material for 3-Dimensional (3D) Printing

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3887
Author(s):  
Watcharapong Pudkon ◽  
Chavee Laomeephol ◽  
Siriporn Damrongsakkul ◽  
Sorada Kanokpanont ◽  
Juthamas Ratanavaraporn
Keyword(s):  
3D Printing ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Structure Stability ◽  
3 Dimensional ◽  
Critical Technology ◽  
Box Structure ◽  
High Degree

Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1–3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.

scholarly journals In vivo degradation of three-dimensional silk fibroin scaffolds

Biomaterials ◽  
2008 ◽  
Vol 29 (24-25) ◽  
pp. 3415-3428 ◽  
Author(s):  
Yongzhong Wang ◽  
Darya D. Rudym ◽  
Ashley Walsh ◽  
Lauren Abrahamsen ◽  
Hyeon-Joo Kim ◽  
...  
Keyword(s):  
Silk Fibroin ◽  
Three Dimensional ◽  
In Vivo Degradation

In Vitro Evaluation of the Growth and Migration of Schwann Cells on Electrospun Silk Fibroin Nanofibers

2011 ◽  
Vol 175-176 ◽  
pp. 220-223 ◽  
Author(s):  
Ai Jun Hu ◽  
Bao Qi Zuo ◽  
Feng Zhang ◽  
Qing Lan ◽  
Huan Xiang Zhang
Keyword(s):  
Tissue Engineering ◽  
Peripheral Nerve ◽  
Nerve Regeneration ◽  
Schwann Cells ◽  
Silk Fibroin ◽  
Nerve Tissue ◽  
Nerve Tissue Engineering ◽  
And Migration ◽  
Silk Fibroin Nanofibers

Schwann cells (SCs) are primary structural and functional cells in peripheral nervous system and play a crucial role in peripheral nerve regeneration. Current challenge in peripheral nerve tissue engineering is to produce an implantable scaffold capable of bridging long nerve gaps and assist Scs in directing the growth of regenerating axons in nerve injury recovery. Electrospun silk fibroin nanofibers, fabricated for the cell culture in vitro, can provide such experiment support. Silk fibroin scaffolds (SFS) were fabricated with formic acid (FA), and the average fiber diameter was 305 ± 24 nm. The data from microscopic, immunohistochemical and scanning electron micrograph confirmed that the scaffold was beneficial to the adherence, proliferation and migration of SCs without exerting any significant cytotoxic effects on their phenotype. Thus, providing an experimental foundation accelerated the formation of bands of Bünger to enhance nerve regeneration. 305 nm SFS could be a candidate material for nerve tissue engineering.

scholarly journals Adsorption/desorption and biofunctional properties of oleuropein loaded on different types of silk fibroin matrices

2017 ◽  
Vol 36 (1) ◽  
Author(s):  
Oguz Bayraktar ◽  
Ali Bora Balta ◽  
Guldemet Basal Bayraktar
Keyword(s):  
Silk Fibroin ◽  
Antibacterial Properties ◽  
Average Diameter ◽  
Electrospinning Technique ◽  
Collector Plate ◽  
Regenerated Silk Fibroin ◽  
Different Types ◽  
Healing Property ◽  
Silk Fibroin Nanofibers ◽  
Adsorption Desorption

The objective of this study was to investigate the adsorption/desorption behavior of oleuropein on different types of silk fibroin matrices including silk fibroin microfibers (MF), regenerated silk fibroin (RSF), and silk fibroin nanofibers (NF). Nanofibers with an average diameter of ranging between 24 and 326 nm were successfully prepared using the electrospinning technique. The effects of the silk fibroin concentration, the voltage applied and the distance between needle tip and collector plate on the morphology of the NF were investigated. The adsorption capacities of MF, RSF and NF were determined as 104.92, 163.07 and 228.34 mg oleuropein per gram of material, respectively. The percentage of initially adsorbed oleuropein that was desorbed was 86.08, 91.29 and 96.67% for MF, RSF and NF, respectively.NF and RSF discs loaded with oleuropein were subjected to disc diffusion assays to determine their antibacterial activity against test microorganisms Staphylococcus epidermidis (Gram +) and Escherichia coli (Gram – ). The results showed that both biomaterials possessed antibacterial properties after loading with oleuropein. Wound scratch assays using oleuropein released from NF revealed an enhancement of cell migration, indicating a wound healing property of the material.In conclusion, the NF can be utilized as a biofunctional polymeric material with better performance for the adsorption and desorption of oleuropein compared with MF and RSF.

Incorporation of two‐dimensional nanomaterials into silk fibroin nanofibers for cardiac tissue engineering

2019 ◽  
Vol 31 (2) ◽  
pp. 248-259 ◽  
Author(s):  
Hojjatollah Nazari ◽  
Asieh Heirani‐Tabasi ◽  
Maryam Hajiabbas ◽  
Masoud Khalili ◽  
Mohammadhossein Shahsavari Alavijeh ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Silk Fibroin ◽  
Cardiac Tissue ◽  
Cardiac Tissue Engineering ◽  
Two Dimensional ◽  
Silk Fibroin Nanofibers

scholarly journals Synergetic effects of graphene–CoPc/silk fibroin three-dimensional porous composites as catalysts for acid red G degradation

RSC Advances ◽  
2019 ◽  
Vol 9 (43) ◽  
pp. 24751-24759 ◽  
Author(s):  
Hui Ma ◽  
Huanxia Zhang ◽  
Mingqiong Tong ◽  
Jianda Cao ◽  
Wen Wu
Keyword(s):  
Silk Fibroin ◽  
Three Dimensional ◽  
Scientific Research ◽  
Dye Wastewater ◽  
Synergetic Effects ◽  
Porous Composites ◽  
Acid Red G

The disposal of dye wastewater is one of the hotspots of scientific research, and graphene–CoTAPc–SF composites exhibit more effective catalytic abilities.

Sign in / Sign up

Export Citation Format

Share Document