Cost estimation relationships of a small scale linear Fresnel reflector

2019 ◽  
Vol 134 ◽  
pp. 1273-1284 ◽  
Author(s):  
A. Barbón ◽  
J.A. Sánchez-Rodríguez ◽  
L. Bayón ◽  
C. Bayón-Cueli
2019 ◽  
Vol 2 (2) ◽  
pp. 21
Author(s):  
Lindawati Lindawati

Reduction of food rations and shortages is one of the impacts of the increasing human population. Food sector industries then try to cope with the fast growing number of customers. Agribusiness sector gains its popularity in these recent years, including pig farm. The increase trend of animal farming industry is likely to bring increasing pollution problem unless effective treatment methods are used. The main problems related to the pig farm include odor nuisance and pig manure disposal. The existing land application of piggery wastewater is the traditional way to discharge the wastewater. This may yield in land and water contamination, due to the accumulation of unused nutrients by crop plant. A case study of a large commercial pig farm from Australia is proposed to apply in smaller scale in Indonesia. Operational strategies for the small-scale SBR (Sequencing Batch Reactor) treating piggery effluent were developed based on lab-scale experiments. Due to SBR characteristics, which are money-saving and space-saving, it is very suitable to be applied in urban area. An economic evaluation was made of various process options. The cost estimation showed that SBR is a cost effective process, allowing operational batches to be adjusted to reduce unnecessary aeration cost. A reduction in the aeration cost was achieved by shortening the batch time from 24-h to 8-h. A comparison of three different SBR options showed that smaller size reactors could be more flexible and cost effective when compared with the larger ones.


2018 ◽  
Vol 116 ◽  
pp. 64-74 ◽  
Author(s):  
A. Barbón ◽  
N. Barbón ◽  
L. Bayón ◽  
J.A. Sánchez-Rodríguez

2019 ◽  
Vol 132 ◽  
pp. 01013
Author(s):  
Dariusz Kwaśniewski

The purpose of the paper was to determine the costs of production of biomass from Miscanthus, for various harvesting technologies. The study includes harvest in the form of chaff and compacted straw, on a 10 ha plantation. The scope of work includes estimated calculations for six different variants, computed with the application “BiOBkalkulator”. The biomass production costs were very diverse and ranged from PLN 80t-1 (PLN 1613ha-1) for the small-scale streamlined harvesting technology, to PLN 258t-1 (PLN 5,158ha-1) for the self-propelled forage harvesting technology, using own machinery (IVa). The costs of harvesting and transporting Miscanthus constitute from approx. 41 to over 80% of the biomass production costs, depending on the variant used.


Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2883
Author(s):  
Arsenio Barbón ◽  
Covadonga Bayón-Cueli ◽  
José A. Fernández Rubiera ◽  
Luis Bayón

A theoretical justification and computation of the optimum values of the two longitudinal tilt angles of a small-scale linear Fresnel reflector is provided. The optimum angle of the mobile structure is proved to be half the latitude of the geographic location, while the optimum angle of the secondary reflector system is proved to be equal to that latitude. Brute-force verification is carried out for five EU cities, each in one of the five European climate zones.


2021 ◽  
Vol 285 ◽  
pp. 116477
Author(s):  
A. Barbón ◽  
J.A. Fernández-Rubiera ◽  
L. Martínez-Valledor ◽  
A. Pérez-Fernández ◽  
L. Bayón

2021 ◽  
pp. 4089-4098
Author(s):  
Irfan Ahmad Khan, Dr. Dipti Kumari

Software development is a complex process which is divided into many phases. According to the software type and industries the development process is restructured. During the entire development what are the main factors which is influencing the process and affecting the quality. The main objective of this study is to focus on factors influencing the development process and how it affects the small scale industries after coming in to the real practice. Entire Software development is a layered process in which different factors are responsible to get the best products. This paper is focused on different technical and non-technical influencing factors which give major impact on the software quality. With influencing factors, their applicability in small scale industries also studied. Three important technical factors i.e. SDLC model and its principles, Cost estimation and Risk parameter whereas two important influencing factors in non-technical.i.e. success factors and environmental factors. Non-technical factors more influencing than technical factors.  All technical and non-technical factors have their own role but to apply all these quality parameters in small scale industries we need to make them more easy for their applicability. If quality development process and its parameters are tuned to easy and affordable level more businessmen will shift from manual working environment to the digital working environment.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Halil Yalcin Akdeniz

Purpose The purpose of this study is to estimate the nitrogen oxide (NOx), carbon monoxide (CO) and hydrocarbon (HC) emissions and their environmental and economic aspects during the actual landing and take-off operations (LTO) of domestic and international flights at a small-scale airport. In this regard, the aircraft-induced NOx, CO and HC emissions analyses, the global warming potential (GWP) estimations of exhaust emissions and the life cycle assessment (LCA)-based environmental impact (EI) estimations of exhaust emissions, and the eco-cost estimation of exhaust emissions are measured. Design/methodology/approach Estimations and calculations are performed in parallel with the International Civil Aviation Organisation’s Engine Emission Databank and Intergovernmental Panel on Climate Change approaches. Also, to assess the environmental effect of the pollutants, the GWP and the EI analyses which is based on the LCA approaches are used. Finally, the eco-cost approach has been used to discuss the economic aspects of these emissions. Findings The total emissions of air pollutants from aircraft are estimated as 601.067 kg/y for HC, 6,074.905 kg/y for CO and 4,156.391 kg/y for NOx at the airport. Also, emissions from international flights account for 79% of emissions from all flights. The Airbus A321 type of aircraft has accounted for more than half of the total HC, CO and NOx emissions. The total amount of emissions from the B738 type of aircraft is estimated as 24%. It is noticed that the taxi phase constitutes 52% of the total HC, CO and NOx emissions. Because of this, it is selected the five different alternative taxi times to observe the effects of pollution role of taxiing time in detail and re-estimated accordingly. According to the re-estimated results with variations in taxiing time, when the taxiing time at the airport is 24 min instead of the original value, this case contributes to a decrease in total LTO emissions of approximately 4%. Also, when the taxiing time is decreased by 2 min, HC, CO and NOx emission amounts decrease by approximately 3.9%, 5.9% and 1.2%, respectively. At this point, the polluting role of taxiing time will be helpful to reduce the aircraft-induced HC, CO and NOx emissions for other larger-scale airports. On the other hand, it is estimated that the GWP of the A321 is 1,066.29 t CO2e whilst the GWP of B738 is 719.50 t CO2e. The eco-cost values of the A321, B738, A320 and CL60-type of aircraft are estimated as almost 61,049.42, 41,086.02, 18,417.43 and 6,163.59 Euros, respectively. Practical implications With the detailed results of this study, the polluting role of taxiing time on total HC, CO and NOx emissions in a small-scale airport will be helpful to reduce aircraft-induced emissions for other larger-scale airports. Also, in the future, this study and its results will be helpful to create an emission inventory at the airport examined. Originality/value In this study, different from some previous studies, air pollutants from aircrafts are evaluated with different aspects such as the EI and eco-cost and GWP. Also, this study will be making a helpful contribution to the literature as it covers the more diversity of the different types of aircrafts in the analyses.


2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Zelalem Girma

This paper presents the technical and economic feasibility of grid connected small scale hydropower construction in selected site of the Kulfo River in southern Ethiopia. In doing so the paper presents the general overview of Ethiopia electric power situation; small scale hydropower situation and barriers and drivers for its development; site assessment and cost estimation methods and at the end presents techno-economic analysis of small scale hydropower development on the Kulfo River in southern Ethiopia. The technical and economic feasibility of the site have been studied by using HOMER, RETscreen, and SMART Mini-IDRO software. The result of simulation shows that the construction of small scale hydropower in the Kulfo River is technically and economically feasible with total net present cost of$13,345,150, cost of energy$0.028/kWh, simple payback period of 12.4 year, and internal rate of return 12.9%. The result also shows that construction of hydropower curtails greenhouse gas emissions such as carbon dioxide by 96,685,45 kg/year, sulfur dioxide by 4,1917 kg/year, and nitrogen dioxide by 20,500 kg/year.


2020 ◽  
Vol 162 ◽  
pp. 43-54 ◽  
Author(s):  
A. Barbón ◽  
C. Bayón-Cueli ◽  
L. Bayón ◽  
P. Fortuny Ayuso

Sign in / Sign up

Export Citation Format

Share Document