Strategies for the sustainable management of industrial wastewater. Determination of the chemical dynamics of a cascade series of five newly constructed ponds

2000 ◽  
Vol 25 (7-8) ◽  
pp. 629-634 ◽  
Author(s):  
G. Allinson ◽  
F. Stagnitti ◽  
S. Salzman ◽  
R.J. Hill ◽  
M. Coates ◽  
...  
Keyword(s):  
Sustainable Management ◽  
Industrial Wastewater ◽  
Chemical Dynamics ◽  
Constructed Ponds

scholarly journals A sensitive spectrophotometric determination of tadalafil in pharmaceutical preparations and industrial wastewater samples

2013 ◽  
Vol 10 (3) ◽  
pp. 1005-1013 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
Standard Deviation ◽  
Industrial Wastewater ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Average Recovery ◽  
Relative Standard ◽  
Wastewater Samples ◽  
Sensitive Spectrophotometric Method

A simple, accurate, precise, rapid, economical and a high sensitive spectrophotometric method has been developed for the determination of tadalafil in pharmaceutical preparations and industrial wastewater samples, which shows a maximum absorbance at 204 nm in 1:1 ethanol-water. Beer's law was obeyed in the range of 1-7?g/ mL ,with molar absorptivity and Sandell ? s sensitivity of 0.783x105l/mol.cm and 4.97 ng/cm2respectively, relative standard deviation of the method was less than 1.7%, and accuracy (average recovery %) was 100 ± 0. 13. The limits of detection and quantitation are 0.18 and 0.54 µg .ml-1, respectively. The method was successfully applied to the determination of tadalafil in some pharmaceutical formulations (tablets) and industrial wastewater samples. The proposed method was validated by sensitivity and precision which proves suitability for the routine analysis of tadalafil in true samples.

scholarly journals Efficient removal of Hg2+, Cd2+ and Pb2+ from aqueous solution and mixed industrial wastewater using a designed chelating ligand, 2-pyridyl-N-(2′-methylthiophenyl) methyleneimine (PMTPM)

2019 ◽  
Vol 79 (6) ◽  
pp. 1092-1101 ◽  
Author(s):  
Krishnendu Kumar Pobi ◽  
Biplab Mondal ◽  
Sumanta Nayek ◽  
Apurba K. Patra ◽  
Rajnarayan Saha
Keyword(s):  
Aqueous Solution ◽  
Industrial Wastewater ◽  
Chelating Agent ◽  
Chloride Ions ◽  
Coordination Geometry ◽  
Reaction Conditions ◽  
X Ray ◽  
Stability Order ◽  
Optimum Reaction

Abstract The present study is focused on the removal of Hg2+, Cd2+ and Pb2+ ions from aqueous solution using a tridentate chelating agent, 2-pyridyl-N-(2′-methylthiophenyl) methyleneimine (PMTPM); and applicability of such removal from industrial wastewater using PMTPM is also investigated. The results showed that the metal ions removal efficiency using PMTPM was in the order of Hg2+(99.46%) > Cd2+(95.42%) > Pb2+(94.54%) under optimum reaction conditions (L:M2+ = 3:1, pH = 9, time = 24 h, temp. = 30 °C). Formed chelated complexes such as [Hg(PMTPM)Cl2] (1), [Cd(PMTPM)Cl2] (2) and [Pb(PMTPM)Cl2] (3) were characterized by numerous spectroscopic tools and X-ray structure determination of a representative complex of Hg2+. In the X-ray structure of [Hg(PMTPM)Cl2], 1, the Hg2+ adopted a distorted tetrahedral coordination geometry surrounding two N donors of PMTPM and two chloride ions. A similar coordination geometry surrounding the respective metal centres in 2 and 3 was established. The thermogravimetric analysis (TGA) revealed a stability order of [Cd(PMTPM)Cl2] > [Hg(PMTPM)Cl2] > [Pb(PMTPM)Cl2]. Further the comparative metal leaching behaviour of these chelate complexes exhibited higher stability in alkaline solution than in acidic. Moreover, PMTPM was applied in real mixed industrial wastewater with alkaline pH, and adequate removals of toxic metals were achieved.

Preparation of nanocellulose modified with dithizone for separation, extraction and determination of trace amounts of manganese ions in industrial wastewater samples

2021 ◽  
Vol 160 ◽  
pp. 105737
Author(s):  
Samaneh Ahmadi-Asoori ◽  
Elham Tazikeh-Lemeski ◽  
Ali Mirabi ◽  
Esmaeil Babanezhad ◽  
Mohammad Habibi Juybari
Keyword(s):  
Industrial Wastewater ◽  
Manganese Ions ◽  
Wastewater Samples

Co-precipitation of Ni, Cr, Mn, Pb and Zn in industrial wastewater and sediment samples with copper(II) cyclo-hexylmethyldithiocarbamate for their flame atomic absorption spectrometric determination

2012 ◽  
Vol 66 (1) ◽  
pp. 105-112 ◽  
Author(s):  
Ayodele Rotimi Ipeaiyeda ◽  
Adekunle Johnson Odola
Keyword(s):  
Heavy Metals ◽  
Atomic Absorption ◽  
Industrial Wastewater ◽  
Atomic Absorption Spectrophotometry ◽  
Sample Volume ◽  
Sediment Samples ◽  
Flame Atomic Absorption ◽  
Precipitation Procedure ◽  
Co Precipitation

A co-precipitation technique for nickel(II), chromium(II), manganese(II), lead(II) and zinc(II) with the aid of copper(II) cyclo-hexylmethyldithiocarbamate was established. The influences of some analytical parameters such as pH, sample volume, amounts of cyclo-hexylmethyldithiocarbamate and copper(II) on the recovery of metal ions were investigated. The heavy metals in the precipitate were determined by flame atomic absorption spectrophotometry. The range of detection limits for the heavy metals was 0.003–0.005 mg/L. The atomic spectrometric technique with co-precipitation procedure was successfully applied for the determination of Ni, Cr, Mn, Pb and Zn in industrial wastewater and sediment samples from Ladipo stream in Lagos, Nigeria. The mean concentrations for these metals using co-precipitation procedure were not significantly different from corresponding concentrations obtained using spectrometric techniques without co-precipitation procedure.

Separation and Preconcentration of Sudan Blue II Using Membrane Filtration and UV-Visible Spectrophotometric Determination in River Water and Industrial Wastewater Samples

2015 ◽  
Vol 98 (1) ◽  
pp. 213-217 ◽  
Author(s):  
Yunus Emre Unsal ◽  
Mustafa Tuzen ◽  
Mustafa Soylak
Keyword(s):  
Spectrophotometric Determination ◽  
Industrial Wastewater ◽  
Membrane Filtration ◽  
Matrix Effects ◽  
Membrane Filter ◽  
Cellulose Acetate Membrane ◽  
Separation And Preconcentration ◽  
Wastewater Samples ◽  
Working Media

Abstract A new separation and preconcentration method based on adsorption on a cellulose acetate membrane filter and elution with ethanol was established for the UV-Vis spectrophotometric determination of Sudan blue II. Various analytical parameters such as pH of working media, flow rates of solutions, and sample volumes were optimized. Matrix effects of concomitants were investigated for the quantitative recovery values of Sudan blue II. The preconcentration factor was200. LOD was calculated as 0.96 μg/L. RSD was5.1%. The optimized procedure was applied to the spectrophotometric determination of Sudan blue II in river and industrial wastewater samples from oil and dye products.

Sign in / Sign up

Export Citation Format

Share Document