On the Use of the Preston Tube in Concentric Annuli

1967 ◽  
Vol 71 (684) ◽  
pp. 865-865
Author(s):  
H. G. Lyall
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Outer Wall ◽  
Technical Note ◽  
Shear Stresses ◽  
Wall Region ◽  
Axial Pressure ◽  
Valid Conclusion ◽  
Axial Pressure Gradient ◽  
Wall Shear

In his technical note in the January 1967 JOURNAL, Quarmby (pp 47-49) concludes that because he was able to predict the axial pressure gradient in a concentric smooth annulus by using Preston tubes to measure the inner and outer wall shear stress, then the Preston tubes are giving correct values for the wall shear stresses. I cannot agree that this is a valid conclusion to draw. A Preston tube can only give wall shear stress correctly if the dimensionless velocity in the wall region is the same as that for which the tube was calibrated.

FLOW OF MICROPOLAR FLUID THROUGH CATHETERIZED ARTERY — A MATHEMATICAL MODEL

2012 ◽  
Vol 05 (02) ◽  
pp. 1250019 ◽  
Author(s):  
D. SRINIVASACHARYA ◽  
D. SRIKANTH
Keyword(s):  
Mathematical Model ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Micropolar Fluid ◽  
Outer Wall ◽  
Shear Stresses ◽  
Closed Form Solutions ◽  
Catheterized Artery ◽  
Wall Shear ◽  
Coupling Number

In this paper, the flow of blood through catheterized artery with mild constriction at the outer wall is considered. The closed form solutions are obtained for velocity and microrotation components. The impedance (resistance to the flow) and wall shear stress are calculated. The effects of catheterization, coupling number, micropolar parameter, and height of the stenosis on impedance and wall shear stresses are discussed.

Preston-Static Tubes for the Measurement of Wall Shear Stress

1994 ◽  
Vol 116 (3) ◽  
pp. 645-649 ◽  
Author(s):  
Josef Daniel Ackerman ◽  
Louis Wong ◽  
C. Ross Ethier ◽  
D. Grant Allen ◽  
Jan K. Spelt
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Convenient Method ◽  
Pipe Flow ◽  
Total Pressure ◽  
Static Pressure ◽  
Shear Stresses ◽  
Streamline Curvature ◽  
Syringe Needle ◽  
Wall Shear

We present a Preston tube device that combines both total and static pressure readings for the measurement of wall shear stress. As such, the device facilitates the measurement of wall shear stress under conditions where there is streamline curvature and/or over surfaces on which it is difficult to either manufacture an array of static-pressure taps or to position a single tap. Our “Preston-static” device is easily and conveniently constructed from commercially available regular and side-bored syringe needles. The pressure difference between the total pressure measured in the regular syringe needle and the static pressure measured in the side-bored one is used to determine the wall shear stress. Wall shear stresses measured in pipe flow were consistent with independently determined values and values obtained using a conventional Preston tube. These results indicate that Preston-static tubes provide a reliable and convenient method of measuring wall shear stress.

Requirements for Mesh Resolution in 3D Computational Hemodynamics

2000 ◽  
Vol 123 (2) ◽  
pp. 134-144 ◽  
Author(s):  
Sujata Prakash ◽  
C. Ross Ethier
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Adaptive Mesh Refinement ◽  
Mesh Refinement ◽  
Adaptive Mesh ◽  
Velocity Fields ◽  
Shear Stresses ◽  
Large Artery ◽  
Mesh Independence ◽  
Wall Shear

Computational techniques are widely used for studying large artery hemodynamics. Current trends favor analyzing flow in more anatomically realistic arteries. A significant obstacle to such analyses is generation of computational meshes that accurately resolve both the complex geometry and the physiologically relevant flow features. Here we examine, for a single arterial geometry, how velocity and wall shear stress patterns depend on mesh characteristics. A well-validated Navier-Stokes solver was used to simulate flow in an anatomically realistic human right coronary artery (RCA) using unstructured high-order tetrahedral finite element meshes. Velocities, wall shear stresses (WSS), and wall shear stress gradients were computed on a conventional “high-resolution” mesh series (60,000 to 160,000 velocity nodes) generated with a commercial meshing package. Similar calculations were then performed in a series of meshes generated through an adaptive mesh refinement (AMR) methodology. Mesh-independent velocity fields were not very difficult to obtain for both the conventional and adaptive mesh series. However, wall shear stress fields, and, in particular, wall shear stress gradient fields, were much more difficult to accurately resolve. The conventional (nonadaptive) mesh series did not show a consistent trend towards mesh-independence of WSS results. For the adaptive series, it required approximately 190,000 velocity nodes to reach an r.m.s. error in normalized WSS of less than 10 percent. Achieving mesh-independence in computed WSS fields requires a surprisingly large number of nodes, and is best approached through a systematic solution-adaptive mesh refinement technique. Calculations of WSS, and particularly WSS gradients, show appreciable errors even on meshes that appear to produce mesh-independent velocity fields.

scholarly journals Assessing Bioinspired Topographies for their Antifouling Potential Control Using Computational Fluid Dynamics (CFD)

2018 ◽  
Vol 152 ◽  
pp. 02004 ◽  
Author(s):  
Jacky Ling ◽  
Felicia Wong Yen Myan
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Extended Period ◽  
Slip Boundary Condition ◽  
Shear Stresses ◽  
Cfd Simulations ◽  
Potential Control ◽  
Slip Boundary ◽  
Computational Fluid Dynamics Cfd ◽  
Wall Shear

Biofouling is the accumulation of unwanted material on surfaces submerged or semi submerged over an extended period. This study investigates the antifouling performance of a new bioinspired topography design. A shark riblets inspired topography was designed with Solidworks and CFD simulations were antifouling performance. The study focuses on the fluid flow velocity, the wall shear stress and the appearance of vortices are to be noted to determine the possible locations biofouling would most probably occur. The inlet mass flow rate is 0.01 kgs-1 and a no-slip boundary condition was applied to the walls of the fluid domain. Simulations indicate that Velocity around the topography averaged at 7.213 x 10-3 ms-1. However, vortices were observed between the gaps. High wall shear stress is observed at the peak of each topography. In contrast, wall shear stress is significantly low at the bed of the topography. This suggests the potential location for the accumulation of biofouling. Results show that bioinspired antifouling topography can be improved by reducing the frequency of gaps between features. Linear surfaces on the topography should also be minimized. This increases the avenues of flow for the fluid, thus potentially increasing shear stresses with surrounding fluid leading to better antifouling performance.

scholarly journals Numerical Simulation of Dispersed Particle-Blood Flow in the Stenosed Coronary Arteries

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Mongkol Kaewbumrung ◽  
Somsak Orankitjaroen ◽  
Pichit Boonkrong ◽  
Buraskorn Nuntadilok ◽  
Benchawan Wiwatanapataphee
Keyword(s):  
Numerical Simulation ◽  
Blood Flow ◽  
Shear Stress ◽  
Coronary Artery ◽  
Pressure Drop ◽  
Wall Shear Stress ◽  
Stokes Equations ◽  
Spherical Shape ◽  
Shear Stresses ◽  
Wall Shear

A mathematical model of dispersed bioparticle-blood flow through the stenosed coronary artery under the pulsatile boundary conditions is proposed. Blood is assumed to be an incompressible non-Newtonian fluid and its flow is considered as turbulence described by the Reynolds-averaged Navier-Stokes equations. Bioparticles are assumed to be spherical shape with the same density as blood, and their translation and rotational motions are governed by Newtonian equations. Impact of particle movement on the blood velocity, the pressure distribution, and the wall shear stress distribution in three different severity degrees of stenosis including 25%, 50%, and 75% are investigated through the numerical simulation using ANSYS 18.2. Increasing degree of stenosis severity results in higher values of the pressure drop and wall shear stresses. The higher level of bioparticle motion directly varies with the pressure drop and wall shear stress. The area of coronary artery with higher density of bioparticles also presents the higher wall shear stress.

Radial Stagnation Flow on a Twisting Cylinder

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Patrick Weidman
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Shooting Method ◽  
Azimuthal Velocity ◽  
Shear Stresses ◽  
Torsional Motion ◽  
Stagnation Flow ◽  
Strong Function ◽  
Stress Parameter ◽  
Wall Shear

The problem of stagnation-point flow impinging radially on a linearly twisting cylinder is considered. This advances previous work on the motion outside a cylinder undergoing linear torsional motion. The problem is governed by a Reynolds number R and a dimensionless torsion rate σ. Numerical calculations are carried out using the ODEINT program, and convergence of the shooting method is obtained using the MNEWT program. The radial and azimuthal wall shear stresses are found over a range of R and σ, and radial and azimuthal velocity profiles at σ={0,1,2} are presented for various values of R. The interesting feature is that the axial wall shear stress parameter f″(1) is a very weak function of σ while the azimuthal wall shear stress parameter g′(1) is a strong function of σ although both stress parameters are a strong function of R.

Analysis of Flow Disturbance in a Stenosed Carotid Artery Bifurcation Using Two-Equation Transitional and Turbulence Models

2008 ◽  
Vol 130 (6) ◽  
Author(s):  
F. P. P. Tan ◽  
G. Soloperto ◽  
S. Bashford ◽  
N. B. Wood ◽  
S. Thom ◽  
...  
Keyword(s):  
Shear Stress ◽  
Carotid Artery ◽  
Laminar Flow ◽  
Wall Shear Stress ◽  
Turbulence Models ◽  
Carotid Bifurcation ◽  
Patient Specific ◽  
Shear Stresses ◽  
Zone Length ◽  
Wall Shear

In this study, newly developed two-equation turbulence models and transitional variants are employed for the prediction of blood flow patterns in a diseased carotid artery where the growth, progression, and structure of the plaque at rupture are closely linked to low and oscillating wall shear stresses. Moreover, the laminar-turbulent transition in the poststenotic zone can alter the separation zone length, wall shear stress, and pressure distribution over the plaque, with potential implications for stresses within the plaque. Following the validation with well established experimental measurements and numerical studies, a magnetic-resonance (MR) image-based model of the carotid bifurcation with 70% stenosis was reconstructed and simulated using realistic patient-specific conditions. Laminar flow, a correlation-based transitional version of Menter’s hybrid k‐ϵ∕k‐ω shear stress transport (SST) model and its “scale adaptive simulation” (SAS) variant were implemented in pulsatile simulations from which analyses of velocity profiles, wall shear stress, and turbulence intensity were conducted. In general, the transitional version of SST and its SAS variant are shown to give a better overall agreement than their standard counterparts with experimental data for pulsatile flow in an axisymmetric stenosed tube. For the patient-specific case reported, the wall shear stress analysis showed discernable differences between the laminar flow and SST transitional models but virtually no difference between the SST transitional model and its SAS variant.

The Law of the Wall for Swirling Flow in Annular Ducts

1989 ◽  
Vol 111 (2) ◽  
pp. 160-164 ◽  
Author(s):  
R. J. Kind ◽  
F. M. Yowakim ◽  
S. A. Sjolander
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Swirling Flow ◽  
Tangential Velocity ◽  
Wall Region ◽  
Law Of The Wall ◽  
Resultant Velocity ◽  
The Law ◽  
Wall Shear ◽  
Near Wall

Expressions for the logarithmic portion of the law of the wall are derived for the axial and tangential velocity components of swirling flow in annular ducts. These expressions involve new shear-velocity scales and curvature terms. They are shown to agree well with experiment over a substantial portion of the flow near both walls of an annulus. The resultant velocity data also agree with the law of the wall. The success of the proposed logarithmic expressions implies that the mixing-length model used in deriving them correctly describes flow-velocity behavior. This model indicates that the velocity gradient at any height y in the near-wall region is determined by the wall shear stress, not by the local shear stress. This suggests that the influence of wall shear stress is dominant and that it determines the near-wall wall flow even in flows with curvature and pressure gradient. A physical explanation is suggested for this.

scholarly journals Effect of reverse flow on the pattern of wall shear stress near arterial branches

2011 ◽  
Vol 8 (64) ◽  
pp. 1594-1603 ◽  
Author(s):  
A. Kazakidi ◽  
A. M. Plata ◽  
S. J. Sherwin ◽  
P. D. Weinberg
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Steady Flow ◽  
Stokes Equations ◽  
Reverse Flow ◽  
Side Branch ◽  
Navier Stokes ◽  
Wall Region ◽  
Wall Shear ◽  
Near Wall

Atherosclerotic lesions have a patchy distribution within arteries that suggests a controlling influence of haemodynamic stresses on their development. The distribution near aortic branches varies with age and species, perhaps reflecting differences in these stresses. Our previous work, which assumed steady flow, revealed a dependence of wall shear stress (WSS) patterns on Reynolds number and side-branch flow rate. Here, we examine effects of pulsatile flow. Flow and WSS patterns were computed by applying high-order unstructured spectral/hp element methods to the Newtonian incompressible Navier–Stokes equations in a geometrically simplified model of an aorto-intercostal junction. The effect of pulsatile but non-reversing side-branch flow was small; the aortic WSS pattern resembled that obtained under steady flow conditions, with high WSS upstream and downstream of the branch. When flow in the side branch or in the aortic near-wall region reversed during part of the cycle, significantly different instantaneous patterns were generated, with low WSS appearing upstream and downstream. Time-averaged WSS was similar to the steady flow case, reflecting the short duration of these events, but patterns of the oscillatory shear index for reversing aortic near-wall flow were profoundly altered. Effects of reverse flow may help explain the different distributions of lesions.

Sign in / Sign up

Export Citation Format

Share Document