scholarly journals Reservoir characteristics of intracontinental carbonate ramp deposits-Upper Muschelkalk, Middle Triassic, NE Netherlands

2004 ◽  
Vol 83 (1) ◽  
pp. 1-15 ◽  
Author(s):  
M. C. Pöppelreiter ◽  
A. Simone ◽  
G. Hoetz

AbstractThe Upper Muschelkalk is an unusual reservoir in NW Europe, producing only in the Coevorden Muschelkalk field, onshore the Netherlands. Origin and nature of the gas producing intervals were poorly known. The objective of the paper is to provide a comprehensive description of facies, cyclicity and petrophysical characteristics. From this description a depositional and sequence stratigraphic model is proposed, which explains why there is gas production only from certain intervals of the sequence. Our investigation is based on seismic, core and open hole log data. It indicates that the reservoir consists of dolomites, which are either muddy lagoonal to sabkha, or grainy backshoal deposits. The best reservoir quality is encountered in peloidal-oolitic packstones to grainstones. These represent storm-dominated backshoal deposits and constitute the inner part of a homoclinal carbonate ramp. The succession shows a conspicuous hierarchical cyclicity. Porous backshoal deposits form during maximum transgression and early regression. However permeable, gas producing backshoal deposits only occur in the upper 15 to 20 m, which forms the large-scale regressive hemi-cycle of the Upper Muschelkalk. Better reservoir quality in the upper hemi-cycle is due to changes in grain type and early diagenesis. The investigation might serve as calibration point for further exploring the Upper Muschelkalk reservoir and its facies pattern in the NW European basin.

GeoArabia ◽  
2005 ◽  
Vol 10 (3) ◽  
pp. 17-44 ◽  
Author(s):  
Elena Morettini ◽  
Anthony Thompson ◽  
Gregor Eberli ◽  
Keith Rawnsley ◽  
Roeland Roeterdink ◽  
...  

ABSTRACT In the Fahud field of Oman, the integration between hierarchies of sequence stratigraphic units and fracture systems has proven to be crucial to explain the distribution of flow and mechanical units. The study focused on the Upper Cretaceous, Albian to Lower Cenomanian Natih e unit (Natih Formation, Wasia Group), a 170-mthick carbonate sequence/reservoir, which exhibits heterogeneities in both facies and reservoir quality. Based on a core-derived high-resolution sequence stratigraphic analysis, the Natih e reservoir can be subdivided into four orders of depositional cycles (from 6th- to 3rd-order). Each cycle consists of a transgressive and regressive hemicycle with characteristic facies and rock properties. The facies and diagenetic overprint of the higher-order cycles vary according to their position within the 3rd-order sequences. Analysis of core, borehole images, seismic, tracer and production data indicate a hierarchy of fractures and faults that seems to follow the stratigraphic subdivisions. A relationship between depositional and diagenetic architecture of the cycles, and the aforementioned data, led to the identification of mechanical layering and stratigraphy within the reservoir. This finding was validated and supported by the successful history match of the three-phase production data within the dynamic model of the reservoir. The combination of sequence and mechanical stratigraphy provides a framework for the correlation of facies and mechanical units across the field. Furthermore, the facies and mechanical units are related to reservoir quality and fracture distribution for consistent upscaling into large-scale reservoir models. Through close co-operation between geologists and reservoir engineers utilising dynamic data, it was possible to determine the most appropriate scale for flow and ensure that such a scale was then used as input for dynamic modelling and for planning of the future exploitation of the Fahud field. As a result of this study, Petroleum Development Oman (PDO) has evaluated a 20% increase in risked reserves, and a 25% reduction of well costs.


1998 ◽  
Vol 68 (4) ◽  
pp. 579-595 ◽  
Author(s):  
R. D. Winn ◽  
H. H. Roberts ◽  
B. Kohl ◽  
R. H. Fillon ◽  
J. A. Crux ◽  
...  

2021 ◽  
Author(s):  
Sviatoslav Iuras ◽  
Samira Ahmad ◽  
Chiara Cavalleri ◽  
Yernur Akashev

Abstract Ukraine ranks the third largest gas reserves in Europe. Gas production is carried out mainly from the Dnieper-Donets Basin (DDB). A gradual decline in reserves is forcing Ukraine to actively search for possible sources to increase reserves by finding bypassed gas intervals in existing wells or exploration of new prospects. This paper describes 3 case studies, where advanced pulsed neutron logging technology has shown exceptional value in gas-bearing layer identification in different scenarios. The logging technology was applied for formation evaluation. The technology is based on the neutron interaction with the minerals and the fluids contained in the pore space. The logging tool combines measurements from multiple detectors and spacing for self-compensated neutron cross-capture section (sigma) and hydrogen index (HI), and the Fast Neutron Cross Section (FNXS) high-energy neutron elastic cross section rock property. Comprehensive capture and inelastic elemental spectroscopy are simultaneously recorded and processed to describe the elemental composition and the matrix properties, reducing the uncertainties related to drilling cuttings analysis, and overall, the petrophysical evaluation combined with other log outputs. The proposed methodology was tested in several wells, both in open hole and behind casing. In the study we present its application in three wells from different fields of the DDB. The log data acquisition and analysis were performed across several sandstone beds and carbonates formation with low porosities (<10%), in various combinations of casing and holes sizes. The results showed the robustness and effectiveness of using the advanced pulsed neutron logging (PNL) technologies in multiple cases: Case Study A: Enabling a standalone cased hole evaluation and highlighting new potential reservoir zones otherwise overlooked due to absence of open hole logs. Case Study B: Finding by-passed hydrocarbon intervals that were missed from log analysis based on conventional open hole logs for current field operator. Case Study C: Identifying gas saturated reservoirs and providing solid lithology identification that previously was questioned from drilling cuttings in an unconventional reservoir.


2018 ◽  
Author(s):  
Amr Abd El Baky ◽  
Nawaf Al-Shuaibi ◽  
Alaa Eldine Alboueshi ◽  
Mohamed Elmofti ◽  
Ebrahim Elafify ◽  
...  

Author(s):  
Mark McDougall ◽  
Ken Williamson

Oil and gas production in Canada’s west has led to the need for a significant increase in pipeline capacity to reach export markets. Current proposals from major oil and gas transportation companies include numerous large diameter pipelines across the Rocky Mountains to port locations on the coast of British Columbia (BC), Canada. The large scale of these projects and the rugged terrain they cross lead to numerous challenges not typically faced with conventional cross-country pipelines across the plains. The logistics and access challenges faced by these mountain pipeline projects require significant pre-planning and assessment, to determine the timing, cost, regulatory and environmental impacts. The logistics of pipeline construction projects mainly encompasses the transportation of pipe and pipeline materials, construction equipment and supplies, and personnel from point of manufacture or point of supply to the right-of-way (ROW) or construction area. These logistics movement revolve around the available types of access routes and seasonal constraints. Pipeline contractors and logistics companies have vast experience in moving this type of large equipment, however regulatory constraints and environmental restrictions in some locations will lead to significant pre-planning, permitting and additional time and cost for material movement. In addition, seasonal constraints limit available transportation windows. The types of access vary greatly in mountain pipeline projects. In BC, the majority of off-highway roads and bridges were originally constructed for the forestry industry, which transports logs downhill whereas the pipeline industry transports large equipment and pipeline materials in both directions and specifically hauls pipe uphill. The capacity, current state and location of these off-highway roads must be assessed very early in the process to determine viability and/or potential options for construction access. Regulatory requirements, environmental restrictions, season of use restrictions and road design must all be considered when examining the use of or upgrade of existing access roads and bridges. These same restrictions are even more critical to the construction of new access roads and bridges. The logistics and access challenges facing the construction of large diameter mountain pipelines in Western Canada can be managed with proper and timely planning. The cost of the logistics and access required for construction of these proposed pipeline projects will typically be greater than for traditional pipelines, but the key constraint is the considerable time requirement to construct the required new access and pre-position the appropriate material to meet the construction schedule. The entire project team, including design engineers, construction and logistics planners, and material suppliers must be involved in the planning stages to ensure a cohesive strategy and schedule. This paper will present the typical challenges faced in access and logistics for large diameter mountain pipelines, and a process for developing a comprehensive plan for their execution.


2018 ◽  
Vol 8 (1) ◽  
pp. 18
Author(s):  
Kees Bourgonje ◽  
Hubert J. Veringa ◽  
David M.J. Smeulders ◽  
Jeroen A. van Oijen

To speed up the torrefaction process in traditional torrefaction reactors, in particular auger reactors, the temperature of the reactor is substantially higher than the required torrefaction process temperature. This is due to the low heat conductivity of biomass. Unfortunately, the off-gas characteristics of biomass are very sensitive in the temperature window of 180-300°C which can cause a thermal runaway situation in which the process temperature exceeds the intended level. Due to this very sensitive temperature dependence of biomass pyrolysis and its accompanying gas production, a potential solution is to inject small amounts of air directly into the torrefaction reactor. It is found experimentally that this air injection can regulate the temperature of the biomass very rapidly compared to traditional temperature regulation by changing the reactor wall temperature. With this new torrefaction temperature control method, thermal runaway situations can be avoided and the temperature of the biomass in the reactor can be regulated better. Experiments with large beech wood samples show that the torrefaction reaction rate and the temperature in the core of the sample depend on the amount of injected air. Since the flow of combustible gasses (torr-gas) originating from the torrefaction process is very sensitive to temperature, the heat production by combusting the torr-gas can be controlled to some extent. This will result in both a more homogeneous torrefied product as well as a more stable processing of varying biomass types in large-scale torrefaction systems.


2016 ◽  
Vol 13 (15) ◽  
pp. 4595-4613 ◽  
Author(s):  
Alison L. Webb ◽  
Emma Leedham-Elvidge ◽  
Claire Hughes ◽  
Frances E. Hopkins ◽  
Gill Malin ◽  
...  

Abstract. The Baltic Sea is a unique environment as the largest body of brackish water in the world. Acidification of the surface oceans due to absorption of anthropogenic CO2 emissions is an additional stressor facing the pelagic community of the already challenging Baltic Sea. To investigate its impact on trace gas biogeochemistry, a large-scale mesocosm experiment was performed off Tvärminne Research Station, Finland, in summer 2012. During the second half of the experiment, dimethylsulfide (DMS) concentrations in the highest-fCO2 mesocosms (1075–1333 µatm) were 34 % lower than at ambient CO2 (350 µatm). However, the net production (as measured by concentration change) of seven halocarbons analysed was not significantly affected by even the highest CO2 levels after 5 weeks' exposure. Methyl iodide (CH3I) and diiodomethane (CH2I2) showed 15 and 57 % increases in mean mesocosm concentration (3.8 ± 0.6 increasing to 4.3 ± 0.4 pmol L−1 and 87.4 ± 14.9 increasing to 134.4 ± 24.1 pmol L−1 respectively) during Phase II of the experiment, which were unrelated to CO2 and corresponded to 30 % lower Chl a concentrations compared to Phase I. No other iodocarbons increased or showed a peak, with mean chloroiodomethane (CH2ClI) concentrations measured at 5.3 (±0.9) pmol L−1 and iodoethane (C2H5I) at 0.5 (±0.1) pmol L−1. Of the concentrations of bromoform (CHBr3; mean 88.1 ± 13.2 pmol L−1), dibromomethane (CH2Br2; mean 5.3 ± 0.8 pmol L−1), and dibromochloromethane (CHBr2Cl, mean 3.0 ± 0.5 pmol L−1), only CH2Br2 showed a decrease of 17 % between Phases I and II, with CHBr3 and CHBr2Cl showing similar mean concentrations in both phases. Outside the mesocosms, an upwelling event was responsible for bringing colder, high-CO2, low-pH water to the surface starting on day t16 of the experiment; this variable CO2 system with frequent upwelling events implies that the community of the Baltic Sea is acclimated to regular significant declines in pH caused by up to 800 µatm fCO2. After this upwelling, DMS concentrations declined, but halocarbon concentrations remained similar or increased compared to measurements prior to the change in conditions. Based on our findings, with future acidification of Baltic Sea waters, biogenic halocarbon emissions are likely to remain at similar values to today; however, emissions of biogenic sulfur could significantly decrease in this region.


2005 ◽  
Vol 7 ◽  
pp. 21-24
Author(s):  
Poul Schiøler ◽  
Jan Andsbjerg ◽  
Ole R. Clausen ◽  
Gregers Dam ◽  
Karen Dybkjær ◽  
...  

Intense drilling activity following the discovery of the Siri Field in 1995 has resulted in an improved understanding of the siliciclastic Palaeogene succession in the Danish North Sea sector (Fig. 1). Many of the new wells were drilled in the search for oil reservoirs in sand bodies of Paleocene–Eocene age. The existing lithostratigraphy was based on data from a generation of wells that were drilled with deeper stratigraphic targets, with little or no interest in the overlying Palaeogene sediments, and thus did not adequately consider the significance of the Palaeogene sandstone units in the Danish sector. In order to improve the understanding of the distribution, morphology and age of the Palaeogene sediments, in particular the economically important sandstone bodies, a detailed study of this succession in the Danish North Sea has recently been undertaken. An important aim of the project was to update the lithostratigraphic framework on the basis of the new data.The project was carried out at the Geological Survey of Denmark and Greenland (GEUS) with participants from the University of Aarhus, DONG E&P and Statoil Norway, and was supported by the Danish Energy Agency. Most scientific results cannot be released until September 2006, but a revised lithostratigraphic scheme may be published prior to that date. Formal definition of new units and revision of the lithostratigraphy are in preparation. All of the widespread Palaeogene mudstone units in the North Sea have previously been formally established in Norwegian or British wells, and no reference sections exist in the Danish sector. As the lithology of a stratigraphic unit may vary slightly from one area to another, Danish reference wells have been identified during the present project, and the lithological descriptions of the formations have been expanded to include the appearance of the units in the Danish sector. Many of the sandstone bodies recently discovered in the Danish sector have a limited spatial distribution and were sourced from other areas than their contemporaneous counterparts in the Norwegian and British sectors. These sandstone bodies are therefore defined as new lithostratigraphic units in the Danish sector, and are assigned Danish type and reference sections. There is a high degree of lithological similarity between the Palaeogene–Neogene mudstone succession from Danish offshore boreholes and that from onshore exposures and boreholes, and some of the mudstone units indeed seem identical. However, in order to acknowledge the traditional distinction between offshore and onshore stratigraphic nomenclature, the two sets of nomenclature are kept separate herein. In recent years oil companies operating in the North Sea have developed various in-house lithostratigraphic charts for the Paleocene–Eocene sand and mudstone successions in the Danish and Norwegian sectors. A number of informal lithostratigraphic units have been adopted and widely used. In the present project, these units have been formally defined and described, maintaining their original names whenever feasible, with the aim of providing an unequivocal nomenclature for the Palaeogene – lower Neogene succession in the Danish sector. It has not been the intention to establish a sequence stratigraphic model for this succession in the North Sea; the reader is referred to the comprehensive works of Michelsen (1993), Neal et al. (1994), Mudge & Bujak (1994, 1996a, b), Michelsen et al. (1995, 1998), Danielsen et al. (1997) and Rasmussen (2004).


2021 ◽  
pp. SP509-2021-51
Author(s):  
J. Hendry ◽  
P. Burgess ◽  
D. Hunt ◽  
X. Janson ◽  
V. Zampetti

AbstractImproved seismic data quality in the last 10–15 years, innovative use of seismic attribute combinations, extraction of geomorphological data, and new quantitative techniques, have significantly enhanced understanding of ancient carbonate platforms and processes. 3D data have become a fundamental toolkit for mapping carbonate depositional and diagenetic facies and associated flow units and barriers, giving a unique perspective how their relationships changed through time in response to tectonic, oceanographic and climatic forcing. Sophisticated predictions of lithology and porosity are being made from seismic data in reservoirs with good borehole log and core calibration for detailed integration with structural, paleoenvironmental and sequence stratigraphic interpretations. Geologists can now characterise entire carbonate platform systems and their large-scale evolution in time and space, including systems with few outcrop analogues such as the Lower Cretaceous Central Atlantic “Pre-Salt” carbonates. The papers introduced in this review illustrate opportunities, workflows, and potential pitfalls of modern carbonate seismic interpretation. They demonstrate advances in knowledge of carbonate systems achieved when geologists and geophysicists collaborate and innovate to maximise the value of seismic data from acquisition, through processing to interpretation. Future trends and developments, including machine learning and the significance of the energy transition, are briefly discussed.


Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Yilong Yuan ◽  
Tianfu Xu ◽  
Yingli Xia ◽  
Xin Xin

The effects of geologic conditions and production methods on gas production from hydrate-bearing sediments (HBS) have been widely investigated. The reservoir was usually treated as horizontal distribution, whereas the sloping reservoir was not considered. In fact, most strata have gradients because of the effects of geological structure and diagenesis. In this study, based on currently available geological data from field measurements in Shenhu area of the South China Sea, the effects of formation dip on gas production were investigated through depressurization using a horizontal well. The modeling results indicate that the strategy of horizontal well is an effective production method from the unconfined Class 2 HBS. The predicted cumulative volume of methane produced at the 1000 m horizontal well was 4.51 × 107 ST m3 over 5-year period. The hydrate dissociation behavior of sloping formation is sensitive to changes in the reservoir pressure. As in unconfined marine hydrate reservoir, the sloping formation is not conducive to free methane gas recovery, which results in more dissolved methane produced at the horizontal well. The obvious issue for this challenging target is relatively low exploitation efficiency of methane because of the recovery of very large volumes of water. Consequently, the development of the favorable well completion method to prevent water production is significantly important for realizing large scale hydrate exploitation in the future.


Sign in / Sign up

Export Citation Format

Share Document