Changes in the weight and quality of sugarbeet (Beta vulgaris) roots in storage clamps on farms

1997 ◽  
Vol 129 (3) ◽  
pp. 287-301 ◽  
Author(s):  
K. W. JAGGARD ◽  
C. J. A. CLARK ◽  
M. J. MAY ◽  
S. McCULLAGH ◽  
A. P. DRAYCOTT
Keyword(s):  
Beta Vulgaris ◽  
Reducing Sugars ◽  
Quality Parameters ◽  
Thermal Time ◽  
Temperature Changes ◽  
Sugar Factory ◽  
Commercial Practice ◽  
Random Samples ◽  
Sugar Loss

The changes in weight and quality of sugarbeet roots stored in 18 clamps, mostly in eastern England during the winters of 1992/93 to 1994/95, were studied on farms using best commercial practice. Storage usually started in early December, at about the last recommended date of harvesting, and continued until the end of the beet-processing campaign at the local sugar factory (usually in February). Random samples of beet, in open-weave nets, were either analysed at the outset or were buried in a predetermined pattern in the clamp for up to 84 days. Periodically, samples were removed from the clamps for analysis. Beet weight hardly changed but sugar was lost as a reduction in sugar concentration: this declined at c. 0·02% per day. The concentration of reducing sugars, which are important impurities, increased fourfold during storage. Most other beet quality parameters remained unchanged. Sugar and adjusted weight was lost at 0·143 and 0·187% per day respectively. This relationship was highly significant, but a relationship between sugar loss and accumulated thermal time (0·0188% per °C day) accounted for more of the variation (73%). Temperature changes within the clamps, and the differences between clamps in accumulated thermal time, were not predictable. Some clamp insulation materials appear to allow more heat to accumulate than is desirable.

scholarly journals Assessment of Seawater Intrusion into Shallow Coastal Aquifer in Kanyakumari District, Tamilnadu, India

2020 ◽  
Vol 9 (3) ◽  
pp. 3006-3014
Keyword(s):  
Seawater Intrusion ◽  
Sea Water ◽  
Magnesium Carbonate ◽  
Research Area ◽  
Quality Parameters ◽  
Shallow Aquifer ◽  
Quality Of Water ◽  
Random Samples ◽  
Calcium Magnesium

Improved use of groundwater is often causing intrusion of seawater. The intrusion of seawater also takes place in coastal areas. In this analysis, the distribution and the levels of intrusion in the research area (Kanyakumari district, Tamilnadu, India) are determined. The test was done using random samples at a period of 15 days in which 30 different samples were taken in 5 different locations with a certain distance from the seashore, then chemical analysis including pH, electrical conductivity (EC), total dissolved solids (TDS), chloride, sodium, calcium, magnesium, carbonate, and bicarbonate water quality parameters were carried out. Chloride Bicarbonate Ratio was used for the calculation of the penetration rate of the seawater, and subsequently chloride and electric conductivity were defined as type and quality of water characters. The results showed that the shallow aquifer was intruded by seawater at several sample levels, which was included in the normal to high intrusion classification. The sea water intrusion was classified as freshwater to saltwater, the concentrations in chloride ranged from 159 to 6021 mg / L. The ratio of bicarbonate chloride was 0.28 to 21.46, normally above 15.5, indicating that groundwater was disturbed. As a result, in comparison to standards or other seawater intrusion indicators, Rajakamangalam-well 1 (RM-W1) has been affected by seawater intrusion highly.

Control Paramethers for Sous-vide Cook-chill Processing of Swiss Chard (Beta vulgaris) Stems

2008 ◽  
Vol 14 (5_suppl) ◽  
pp. 117-122 ◽  
Author(s):  
J. Mir ◽  
R. Oria ◽  
M.L. Salvador
Keyword(s):  
Beta Vulgaris ◽  
Chemical Properties ◽  
Quality Parameters ◽  
Transfer Model ◽  
Processing Temperature ◽  
Conductive Heat ◽  
Geometric Configurations ◽  
Physico Chemical ◽  
Swiss Chard

Within the various stages involved in the preparation of swiss chart stems (Beta vulgaris) as a `V gamme' product, this work concentrated on heating and subsequent cooling, since these are the stages which cause the most drastic changes in the quality parameters of the product. For the detailed analysis, a 3D finite-difference conductive heat transfer model has been developed. This model takes into account vegetal physico-chemical properties (humidity, density, thermal conductivity) as well as their thermoresistance. The texture is one of the parameters that most influences the organoleptic quality of this product, both as an indicator of the extent of cooking and for reflecting the level of homogeneity. Its temperature dependence has been determined by means of a texturometer, confirming a first-order Arrhenius type behavior. Assuming a pasteurization level corresponding to the absence of Listeria monocytogenes in its vegetative form with a margin of 7 logarithmic units as appropriate, the solution of the model enables the establishment of the time necessary for each processing temperature (from 65 to 95 °C). Given the marked temperature gradients observed, various geometric configurations of the stems have been simulated in order to find the most homogenous product.

Quality of ram spermatozoa separated with modified swim up method

2018 ◽  
Vol 33 (2) ◽  
pp. 62-70 ◽  
Author(s):  
A Hossain ◽  
MM Islam ◽  
F Naznin ◽  
RN Ferdousi ◽  
FY Bari ◽  
...  
Keyword(s):  
Semen Quality ◽  
Membrane Integrity ◽  
Quality Parameters ◽  
Fluid Medium ◽  
Normal Morphology ◽  
The Mean ◽  
Mass Activity ◽  
Fresh Semen ◽  
Artificial Vagina

Semen was collected from four rams, using artificial vagina and viability%, motility% and plasma membrane integrity% were measured. Fresh ejaculates (n = 32) were separated by modified swim-up separation using modified human tubal fluid medium. Four fractions of supernatant were collected at 15-minute intervals. The mean volume, mass activity, concentration, motility%, viability%, normal morphology and membrane integrity% (HOST +ve) of fresh semen were 1.0 ± 0.14, 4.1 ± 0.1 × 109 spermatozoa/ml, 85.0 ± 1.3, 89.4 ± 1.0, 85.5 ± 0.7, 84.7 ± 0.5 respectively. There was no significant (P>0.05) difference in fresh semen quality parameters between rams. The motility%, viability% and HOST +ve % of first, second, third and fourth fractions were 53.4 ± 0.5, 68.2 ± 0.3, 74.8 ± 0.3 and 65.5 ± 0.4; 55.5 ± 0.4, 66.2 ± 0.4, 74.5 ± 0.3 and 73.6 ± 0.3 and 66.7 ± 0.5, 66.8 ± 0.5, 65.2 ± 0.4 and 74.7 ± 0.5 respectively. The motility%, viability% and membrane integrity% of separated semen samples differed significantly (P<0.05) between four fractions. The mean motility% and viability% were significantly higher (P<0.05) in third fraction (74.8 ± 0.3%), whereas the mean HOST +ve% was significantly higher (P<0.05) in fourth fraction (74.7 ± 0.5). All quality parameters of separated spermatozoa were significantly (P<0.05) lower than that of fresh semen. The pregnancy rates were higher with fresh semen (71%) in comparison to that of separated sample (57%).Bangl. vet. 2016. Vol. 33, No. 2, 62-70

Yield and Seed quality of barley (Hordeum vulgare L.) as affected by variety, nitrogen level and harvesting time

2014 ◽  
Vol 2 (2) ◽  
pp. 93-100
Author(s):  
Shahnaj Yesmina ◽  
Moushumi Akhtarb ◽  
Belal Hossain
Keyword(s):  
Grain Yield ◽  
Seed Weight ◽  
Seed Quality ◽  
Quality Parameters ◽  
Nitrogen Level ◽  
Yield Attributes ◽  
Harvesting Time ◽  
Nitrogen Levels ◽  
Vigour Index

The experiment was conducted to find out the effect of variety, nitrogen level and harvesting time on yield and seed quality of barley. The treatments used in the experiment consisted of two varieties viz. BARI Barley 4 and BARI Barley 5, three harvesting time viz. 35, 40 and 45 Days after Anthesis (DAA) and nitrogen levels viz. 0, 70, 85 and 100 kg N ha-1 . The experiment was laid out in a spilt- spilt-plot design with three replications assigning the variety to the main plot, harvesting time to the sub-plots and nitrogen level to the sub-sub plots. Variety had significant effects on the all yield attributes except fertile seeds spike-1 . Seed quality parameters viz. normal seeds spike-1 , deformed seeds spike-1 , germination (%) and vigour index were statistically significant. The variety BARI Barley 5 produced higher grain yield and seed quality than BARI Barley 4. Grain yield from BARI Barley 5 and BARI Barley 4 were 4.59 t ha-1 and 4.24 t ha-1 , respectively. Significantly, the highest 1000-seed weight (46.90 g) was produced by BARI Barley 5 than (37.90 g) BARI Barley 4. The result revealed that harvesting time had significant effect on yield and yield attributes and seed quality parameters. Seed yield was highest (4.65 t ha-1 ) when the crop harvested at 40 DAA and it was increased linearly from 35 DAA. Maximum quality seed and 1000-seed weight (43.20 g) was obtained when the crop harvested at 40 DAA. All the yields, yield attributes and seed quality parameters were significantly influenced by nitrogen levels. The highest grain yield (5.14 t ha-1 ) was obtained when BARI Barley 5 variety was fertilized by 100 kg N ha-1 and the lowest (3.14 t ha-1 ) was obtained from control treatments. Normal seeds spike-1 , vigour index, germination (%) were better at 85 kg N ha-1 in variety of BARI Barley 5 than BARI Barley 4. So it can be concluded that BARI Barley 5 showed better result when fertilized with 100 kg N ha-1 and harvested at 40 DAA for getting maximum yield and 85 kg N ha-1 and harvested at 40 DAA for getting better quality seed.

Questionnaire validation for the evaluation of patients satisfaction with chronic generalized periodontitis physiotherapeutic treatment

2019 ◽  
pp. 32-37
Author(s):  
G.B. Lyubomirsky ◽  
T.L. Redinova
Keyword(s):  
Clinical Characteristics ◽  
Quality Parameters ◽  
Questionnaire Validation ◽  
Dental Procedure ◽  
Dental Services ◽  
Patients Satisfaction ◽  
Literary Sources

This article assesses the reliability, constructive validity and reproducibility of a special questionnaire for determining the quality parameters of rendering physiotherapeutic care to patients with chronic generalized periodontitis. The analysis of literary sources showed that there are studies of quality of dental services, however, we have not met with research into the quality and comfort of physiotherapy procedures for periodontal patients. At the same time, the importance of this issue is obvious and requires study and analysis. Without making judgments about the quality of the service, a full-fledged medical dental procedure can not take place. The assortment of physical devices and methods grows annually, their use in the periodontoloical treatment is not always sufficiently justified, the effectiveness is not always confimed therefore it is important to pay attention not only to the marketing efforts directed by the clinics for comfort, but also to analyze the ideas about the quality of the clinical characteristics of physiotherapeutic procedures.

Considerations of the technological quality assessment of sugarbeet

2011 ◽  
pp. 85-89 ◽  
Author(s):  
Giorgio Pezzi
Keyword(s):  
Quality Parameters ◽  
Northern Italy ◽  
Glucose Content ◽  
Long Term Storage ◽  
Interesting Correlation ◽  
Technological Quality ◽  
Thick Juice

No real improvement in the technological quality of beet has been recorded over the last 15 years in Northern Italy. Among the possible explanations for the quality stagnation is that the traditional formulae cannot correctly differentiate between sugarbeet varieties which produce thick juice of very high purity. This seems to be connected with the role of potassium. The use of a standard purification procedure gives reliable and accurate data which is immediately comparable with the factory data. Research projects on medium/long term storage are currently being performed by Co.Pro.B., Italy, in cooperation with Syngenta and Beta. Up to now the results have shown that storage of sugarbeet in autumn time in northern Italy is possible provided that suitable varieties and proper handling of the roots are employed. Results obtained in the storage trials are reported. Correlations have been found between quality parameters (purity, color and lime salts) of the purified juice with the glucose content of the raw juice. An interesting correlation is reported between purified juice purity and raw juice purity.

Environmental Impact Evaluation of Istanbul Wastewater Treatment and Marine Disposal Systems

1992 ◽  
Vol 25 (9) ◽  
pp. 85-92 ◽  
Author(s):  
I. Ozturk ◽  
T. Zambal ◽  
A. Samsunlu ◽  
E. Göknel
Keyword(s):  
Water Quality ◽  
Wastewater Treatment ◽  
Environmental Impact ◽  
Quality Parameters ◽  
Sea Of Marmara ◽  
General Evaluation ◽  
Marine Outfall ◽  
Secondary Stage ◽  
Pre Treatment

Metropolitan Istanbul Wastewater Treatment System contains 14 marine outfalls, seven of which include secondary stage biological treatment processes. The others have only mechanical treatment units including bar screens and grit chambers. Only one mechanical pre-treatment and marine disposal system, Yenikapi plant, has been operated since 1988 among these 14 plants and six of them are ready for construction. In this paper, the environmental impact of Yenikapi pretreatment and marine disposal system on the water quality of the Bosphorus and the Sea of Marmara has been investigated. Long term water quality measurements which were performed in pre-and post-dischange applications have been evaluated. Water quality parameters including pH, DO, BODs, TKN, P and total coliforms were measured at various sampling stations around the discharge points. A general evaluation of marine outfall systems to be constructed in the scope of Istanbul wastewater treatment project, on the water quality of the Sea of Marmara and the Bosphorus has been presented.

First flush effects in an urban catchment area in Aalborg

1998 ◽  
Vol 37 (1) ◽  
pp. 251-257 ◽  
Author(s):  
Torben Larsen ◽  
Kirsten Broch ◽  
Margit Riis Andersen
Keyword(s):  
Water Quality ◽  
Catchment Area ◽  
Quality Parameters ◽  
Average Concentration ◽  
First Flush ◽  
Storm Events ◽  
Urban Catchment ◽  
Discharge Measurements ◽  
Quality Measurements

The paper describes the results of measurements from a 2 year period on a 95 hectare urban catchment in Aalborg, Denmark. The results of the rain/discharge measurements include 160 storm events corresponding to an accumulated rain depth of totally 753 mm. The water quality measurements include 15 events with time series of concentration of SS, COD, BOD, total nitrogen and total phosphorus. The quality parameters showed significant first flush effects. The paper discusses whether either the event average concentration or the accumulated event mass is the most appropriate way to characterize the quality of the outflow.

Effect of Integrated Nutrient Management on Yield and Quality of Garlic cv. Yamuna Safed-3

2020 ◽  
Vol 7 (04) ◽  
Author(s):  
A B Priyanshu ◽  
M K Singh ◽  
Mukesh Kumar ◽  
Vipin Kumar ◽  
Sunil Malik ◽  
...  
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Quality Parameters ◽  
Organic Fertilizers ◽  
Research Centre ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
The Impact ◽  
Horticultural Research

An experiment was conducted at Horticultural Research Centre, SVP University of Agriculture and Technology, Meerut (UP) during Rabi season of 2018-19 to assess the impact of different INM doses on yield and quality parameters of garlic. A total of ten treatments consisting of combinations of inorganic fertilizers, organic fertilizers and bio-fertilizers like T1- (Control), T2RDF (100:50:50 kg NPK ha-1), T3-RDF + 20 kg sulphur + FYM 20 ton ha-1, T4- RDF + 20 kg sulphur + VC 4 ton ha-1, T5- 75% RDF + 40 kg sulphur + 5 ton FYM ha-1+ PSB 5 kg ha-1, T6-75% RDF + 40 kg sulphur + 2 ton VC + Azotobacter 5 kg ha-1, T7- 75% RDF + 40 kg sulphur + FYM 3 ton + VC 1 ton+ PSB 5 kg + Azotobacter 5kg ha-1, T8- 50% RDF + 40 kg sulphur + FYM 5 ton + VC2 ton + PSB 5 kg ha-1, T9- 50% RDF + 40 kg sulphur + FYM5 ton + VC 2 ton+ Azotobacter 5 kg ha-1and T10- 50% RDF + 40 kg sulphur + FYM 5 ton + VC2 ton + PSB 5 kg + Azotobacter 5 kg ha-1 were used in Randomized Block Design and replicated thrice. Out of these an application of T7 (75% RDF + 40 kg sulphur + FYM3 ton + VC 1 ton ha-1 + PSB 5 kg + Azotobacter 5 kg ha-1) was found to be significantly superior in term of yield and attributing parameters of garlic.

scholarly journals Changes in quality parameters of vodka filtered through activated charcoal

2012 ◽  
Vol 30 (No. 5) ◽  
pp. 474-482 ◽  
Author(s):  
L. Siříšťová ◽  
Š. Přinosilová ◽  
K. Riddellová ◽  
J. Hajšlová ◽  
K. Melzoch
Keyword(s):  
Production Technology ◽  
Sensory Analysis ◽  
Activated Charcoal ◽  
Quality Parameters ◽  
High Quality ◽  
Flow Rates ◽  
Positive Effect ◽  
Filtration Device

The production technology of high-quality vodka used in Russia involves filtration through activated charcoal. To approach the quality of renowned Russian vodka, one prominent Czech spirit-producing company installed on its production premises a filtration device including a charcoal column, and launched test runs during which different filtration conditions were tested. Samples collected during the test runs were analysed by GC-FID and GC-MS with the aim to compare their composition; sensory analysis was an integral part of the evaluation. The results documented a positive effect of charcoal filtration on the quality of produced vodka, which was not reduced when higher flow rates were applied. &nbsp;

Sign in / Sign up

Export Citation Format

Share Document