Study of turbulent structure with hot wires smaller than the viscous length

1984 ◽  
Vol 142 ◽  
pp. 121-149 ◽  
Author(s):  
William W. Willmarth ◽  
Lalit K. Sharma
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Velocity Gradient ◽  
Shear Layers ◽  
Small Scale ◽  
Wall Region ◽  
Burst Frequency ◽  
Velocity Fluctuations ◽  
Hot Wires ◽  
Scale Shear

The small-scale structure of the streamwise velocity fluctuations in the wall region of a turbulent boundary layer is examined in a new wind-tunnel facility using hot-wires smaller than any previously constructed (typical dimensions: l = 25 μm, d = 0.5 μm). In the boundary layer in which the measurements were made, the ratio of the hot-wire length to the viscous length is 0.3. The turbulent intensity measured with the small hot wires is larger than that measured with longer wires owing to the better spatial resolution of the small wires. The velocity fluctuations measured by the small hot wires are also analysed to determine the burst frequency at two Reynolds numbers and at various distances from the wall. The dimensionless burst frequency does not depend on the Reynolds number when scaled with wall parameters. However, it increases with Reynolds number when scaled with outer variables. Velocity fluctuations measured by two hot wires, less than two viscous lengths apart, are analysed to reveal the small-scale features present during a burst and in the absence of a burst. The main conclusions are: (1) intermittent small-scale shear layers occur most frequently when bursts are present, less frequently just after a burst, and even less frequently just before a burst; and (2) on occasion the velocity gradient of the small-scale shear layers is as large as the mean-velocity gradient at the wall.

scholarly journals Reynolds number trend of hierarchies and scale interactions in turbulent boundary layers

2017 ◽  
Vol 375 (2089) ◽  
pp. 20160077 ◽  
Author(s):  
W. J. Baars ◽  
N. Hutchins ◽  
I. Marusic
Keyword(s):  
Reynolds Number ◽  
Large Scale ◽  
Reynolds Numbers ◽  
Shear Layers ◽  
Wall Turbulence ◽  
Small Scale ◽  
Velocity Fluctuations ◽  
Scale Interaction ◽  
High Reynolds ◽  
Near Wall

Small-scale velocity fluctuations in turbulent boundary layers are often coupled with the larger-scale motions. Studying the nature and extent of this scale interaction allows for a statistically representative description of the small scales over a time scale of the larger, coherent scales. In this study, we consider temporal data from hot-wire anemometry at Reynolds numbers ranging from Re τ ≈2800 to 22 800, in order to reveal how the scale interaction varies with Reynolds number. Large-scale conditional views of the representative amplitude and frequency of the small-scale turbulence, relative to the large-scale features, complement the existing consensus on large-scale modulation of the small-scale dynamics in the near-wall region. Modulation is a type of scale interaction, where the amplitude of the small-scale fluctuations is continuously proportional to the near-wall footprint of the large-scale velocity fluctuations. Aside from this amplitude modulation phenomenon, we reveal the influence of the large-scale motions on the characteristic frequency of the small scales, known as frequency modulation. From the wall-normal trends in the conditional averages of the small-scale properties, it is revealed how the near-wall modulation transitions to an intermittent-type scale arrangement in the log-region. On average, the amplitude of the small-scale velocity fluctuations only deviates from its mean value in a confined temporal domain, the duration of which is fixed in terms of the local Taylor time scale. These concentrated temporal regions are centred on the internal shear layers of the large-scale uniform momentum zones, which exhibit regions of positive and negative streamwise velocity fluctuations. With an increasing scale separation at high Reynolds numbers, this interaction pattern encompasses the features found in studies on internal shear layers and concentrated vorticity fluctuations in high-Reynolds-number wall turbulence. This article is part of the themed issue ‘Toward the development of high-fidelity models of wall turbulence at large Reynolds number’.

Characteristics of small-scale shear layers in a temporally evolving turbulent planar jet

2021 ◽  
Vol 920 ◽  
Author(s):  
Masato Hayashi ◽  
Tomoaki Watanabe ◽  
Koji Nagata
Keyword(s):  
Shear Layers ◽  
Small Scale ◽  
Planar Jet ◽  
Scale Shear

Abstract

Aero-optics of subsonic turbulent boundary layers

2012 ◽  
Vol 696 ◽  
pp. 122-151 ◽  
Author(s):  
Kan Wang ◽  
Meng Wang
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Boundary Layers ◽  
Dominant Role ◽  
Elevation Angle ◽  
Turbulent Boundary Layers ◽  
Density Field ◽  
Small Scale ◽  
Number Range ◽  
Scale Turbulence

AbstractCompressible large-eddy simulations are carried out to study the aero-optical distortions caused by Mach 0.5 flat-plate turbulent boundary layers at Reynolds numbers of ${\mathit{Re}}_{\theta } = 875$, 1770 and 3550, based on momentum thickness. The fluctuations of refractive index are calculated from the density field, and wavefront distortions of an optical beam traversing the boundary layer are computed based on geometric optics. The effects of aperture size, small-scale turbulence, different flow regions and beam elevation angle are examined and the underlying flow physics is analysed. It is found that the level of optical distortion decreases with increasing Reynolds number within the Reynolds-number range considered. The contributions from the viscous sublayer and buffer layer are small, while the wake region plays a dominant role, followed by the logarithmic layer. By low-pass filtering the fluctuating density field, it is shown that small-scale turbulence is optically inactive. Consistent with previous experimental findings, the distortion magnitude is dependent on the propagation direction due to anisotropy of the boundary-layer vortical structures. Density correlations and length scales are analysed to understand the elevation-angle dependence and its relation to turbulence structures. The applicability of Sutton’s linking equation to boundary-layer flows is examined, and excellent agreement between linking equation predictions and directly integrated distortions is obtained when the density length scale is appropriately defined.

Pressure gradient effects on the large-scale structure of turbulent boundary layers

2013 ◽  
Vol 715 ◽  
pp. 477-498 ◽  
Author(s):  
Zambri Harun ◽  
Jason P. Monty ◽  
Romain Mathis ◽  
Ivan Marusic
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Small Scale

AbstractResearch into high-Reynolds-number turbulent boundary layers in recent years has brought about a renewed interest in the larger-scale structures. It is now known that these structures emerge more prominently in the outer region not only due to increased Reynolds number (Metzger & Klewicki, Phys. Fluids, vol. 13(3), 2001, pp. 692–701; Hutchins & Marusic, J. Fluid Mech., vol. 579, 2007, pp. 1–28), but also when a boundary layer is exposed to an adverse pressure gradient (Bradshaw, J. Fluid Mech., vol. 29, 1967, pp. 625–645; Lee & Sung, J. Fluid Mech., vol. 639, 2009, pp. 101–131). The latter case has not received as much attention in the literature. As such, this work investigates the modification of the large-scale features of boundary layers subjected to zero, adverse and favourable pressure gradients. It is first shown that the mean velocities, turbulence intensities and turbulence production are significantly different in the outer region across the three cases. Spectral and scale decomposition analyses confirm that the large scales are more energized throughout the entire adverse pressure gradient boundary layer, especially in the outer region. Although more energetic, there is a similar spectral distribution of energy in the wake region, implying the geometrical structure of the outer layer remains universal in all cases. Comparisons are also made of the amplitude modulation of small scales by the large-scale motions for the three pressure gradient cases. The wall-normal location of the zero-crossing of small-scale amplitude modulation is found to increase with increasing pressure gradient, yet this location continues to coincide with the large-scale energetic peak wall-normal location (as has been observed in zero pressure gradient boundary layers). The amplitude modulation effect is found to increase as pressure gradient is increased from favourable to adverse.

scholarly journals Wall-attached structures of velocity fluctuations in a turbulent boundary layer

2018 ◽  
Vol 856 ◽  
pp. 958-983 ◽  
Author(s):  
Jinyul Hwang ◽  
Hyung Jin Sung
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
High Reynolds Number ◽  
Wall Turbulence ◽  
Velocity Fluctuations ◽  
Moderate Reynolds Number ◽  
Wide Range ◽  
Logarithmic Region ◽  
High Reynolds ◽  
Attached Eddies

Wall turbulence is a ubiquitous phenomenon in nature and engineering applications, yet predicting such turbulence is difficult due to its complexity. High-Reynolds-number turbulence arises in most practical flows, and is particularly complicated because of its wide range of scales. Although the attached-eddy hypothesis postulated by Townsend can be used to predict turbulence intensities and serves as a unified theory for the asymptotic behaviours of turbulence, the presence of coherent structures that contribute to the logarithmic behaviours has not been observed in instantaneous flow fields. Here, we demonstrate the logarithmic region of the turbulence intensity by identifying wall-attached structures of the velocity fluctuations ($u_{i}$) through the direct numerical simulation of a moderate-Reynolds-number boundary layer ($Re_{\unicode[STIX]{x1D70F}}\approx 1000$). The wall-attached structures are self-similar with respect to their heights ($l_{y}$), and in particular the population density of the streamwise component ($u$) scales inversely with $l_{y}$, reminiscent of the hierarchy of attached eddies. The turbulence intensities contained within the wall-parallel components ($u$ and $w$) exhibit the logarithmic behaviour. The tall attached structures ($l_{y}^{+}>100$) of $u$ are composed of multiple uniform momentum zones (UMZs) with long streamwise extents, whereas those of the cross-stream components ($v$ and $w$) are relatively short with a comparable width, suggesting the presence of tall vortical structures associated with multiple UMZs. The magnitude of the near-wall peak observed in the streamwise turbulent intensity increases with increasing $l_{y}$, reflecting the nested hierarchies of the attached $u$ structures. These findings suggest that the identified structures are prime candidates for Townsend’s attached-eddy hypothesis and that they can serve as cornerstones for understanding the multiscale phenomena of high-Reynolds-number boundary layers.

Vortex patch with wall interaction as new benchmark test

2011 ◽  
Vol 1 (4) ◽  
Author(s):  
Ziemowit Malecha
Keyword(s):  
Fluid Dynamics ◽  
Boundary Layer ◽  
Reynolds Number ◽  
Vortex Structure ◽  
Wall Region ◽  
Threshold Values ◽  
Single Vortex ◽  
Benchmark Test ◽  
Vortex Patch ◽  
Wall Interaction

AbstractIn this paper, a new computational benchmark test for fluid dynamics is presented. The new benchmark is based on the interaction of a single vortex structure (vortex patch) with a wall. It will be shown that it is possible to distinguish two critical or threshold values of the Reynolds number in the considered flow. The increase of the Reynolds number causes the appearance of the vortex bubble in the near-wall region first, and then next, the eruption of the boundary layer phenomenon. Further increase of the Reynolds number causes the flow to be more complex. The eruption phenomenon becomes more intense and also shows its regenerative nature.

Fully resolved numerical simulation of particle-laden turbulent flow in a horizontal channel at a low Reynolds number

2012 ◽  
Vol 693 ◽  
pp. 319-344 ◽  
Author(s):  
Xueming Shao ◽  
Tenghu Wu ◽  
Zhaosheng Yu
Keyword(s):  
Reynolds Number ◽  
Turbulent Flow ◽  
Large Scale ◽  
Horizontal Channel ◽  
Small Scale ◽  
Channel Height ◽  
Wall Region ◽  
Sediment Layer ◽  
Particle Settling ◽  
Volume Fractions

AbstractA fictitious domain method is used to perform fully resolved numerical simulations of particle-laden turbulent flow in a horizontal channel. The effects of large particles of diameter 0.05 and 0.1 times the channel height on the turbulence statistics and structures are investigated for different settling coefficients and volume fractions (0.79 %–7.08 %) for the channel Reynolds number being 5000. The results indicate the following. (a) When the particle sedimentation effect is negligible (i.e. neutrally buoyant), the presence of particles decreases the maximum r.m.s. of streamwise velocity fluctuation near the wall by weakening the intensity of the large-scale streamwise vortices, while increasing the r.m.s. of the streamwise fluctuating velocity in the region very close to the wall and in the centre region. On the other hand, the particles increase the r.m.s. of transverse and spanwise fluctuating velocities in the near-wall region by inducing the small-scale vortices. (b) When the particle settling effect is so substantial that most particles settle onto the bottom wall and form a particle sediment layer (SL), the SL plays the role of a rough wall and parts of the vortex structures shedding from the SL ascend into the core region and substantially increase the turbulence intensity there. (c) When the particle settling effect is moderate, the effects of particles on the turbulence are a combination of the former two situations, and the Shields number is a good parameter for measuring the particle settling effects (i.e. the particle concentration distribution in the transverse direction). The average velocities of the particle are smaller in the lower half-channel and larger in the upper half-channel compared to the local fluid velocities in the presence of gravity effects. The effects of the smaller particles on the turbulence are found to be stronger at the same particle volume fractions.

Generation mechanism of a hierarchy of vortices in a turbulent boundary layer

2019 ◽  
Vol 865 ◽  
pp. 1085-1109 ◽  
Author(s):  
Yutaro Motoori ◽  
Susumu Goto
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Energy Spectrum ◽  
Turbulent Boundary Layer ◽  
Large Scale ◽  
Generation Mechanism ◽  
Small Scale ◽  
Generation Process ◽  
Mean Flow ◽  
The Mean

To understand the generation mechanism of a hierarchy of multiscale vortices in a high-Reynolds-number turbulent boundary layer, we conduct direct numerical simulations and educe the hierarchy of vortices by applying a coarse-graining method to the simulated turbulent velocity field. When the Reynolds number is high enough for the premultiplied energy spectrum of the streamwise velocity component to show the second peak and for the energy spectrum to obey the$-5/3$power law, small-scale vortices, that is, vortices sufficiently smaller than the height from the wall, in the log layer are generated predominantly by the stretching in strain-rate fields at larger scales rather than by the mean-flow stretching. In such a case, the twice-larger scale contributes most to the stretching of smaller-scale vortices. This generation mechanism of small-scale vortices is similar to the one observed in fully developed turbulence in a periodic cube and consistent with the picture of the energy cascade. On the other hand, large-scale vortices, that is, vortices as large as the height, are stretched and amplified directly by the mean flow. We show quantitative evidence of these scale-dependent generation mechanisms of vortices on the basis of numerical analyses of the scale-dependent enstrophy production rate. We also demonstrate concrete examples of the generation process of the hierarchy of multiscale vortices.

Mass transfer between a plane surface and an impinging turbulent jet: the influence of surface-pressure fluctuations

1982 ◽  
Vol 119 ◽  
pp. 91-105 ◽  
Author(s):  
K. Kataoka ◽  
Y. Kamiyama ◽  
S. Hashimoto ◽  
T. Komai
Keyword(s):  
Boundary Layer ◽  
Mass Transfer ◽  
Flat Plate ◽  
Stagnation Point ◽  
Surface Pressure ◽  
Velocity Gradient ◽  
Large Scale ◽  
Pressure Fluctuations ◽  
Wall Region ◽  
Local Measurement

Local measurement of the mass-transfer rate and velocity gradient when an axisymmetric jet impinges on a flat plate was carried out using an electrochemical technique. Local measurement of the surface pressure on the flat plate was carried out separately using piezoelectric pressure transducers. The stagnation-point mass-transfer coefficient reaches a maximum when the flat plate is placed at 6 nozzle diameters from a convergent nozzle. It has been confirmed that the mass transfer to the flat plate for a high Schmidt number is greatly enhanced owing to the velocity-gradient disturbances in the wall region of the boundary layer, while the momentum transfer is insensitive to such disturbances. The relative intensity of the velocity-gradient fluctuations on the wall has an extremely large value at and near to the stagnation point, and decreases downstream, approaching a large constant value.These velocity-gradient disturbances are not due to the usual interaction of Reynolds stress with the shear stress of the mean flow, but are due to the interaction with the surface-pressure fluctuations converted from the velocity fluctuations of the oncoming jet.The three co-ordinate dimensions of large-scale eddies are calculated from the auto- and spatial correlations of the surface-pressure fluctuations. It is considered that such large-scale eddies play an important role in the production of a velocity-gradient disturbance in the wall region of the boundary layer from the velocity turbulence of the approaching jet.

Small-scale anisotropy in turbulent boundary layers

2016 ◽  
Vol 804 ◽  
pp. 5-23 ◽  
Author(s):  
Alain Pumir ◽  
Haitao Xu ◽  
Eric D. Siggia
Keyword(s):  
Reynolds Number ◽  
Channel Flow ◽  
Isotropic Turbulence ◽  
Turbulent Channel Flow ◽  
Statistical Properties ◽  
Simultaneous Action ◽  
Large Reynolds Number ◽  
Small Scale ◽  
Velocity Fluctuations ◽  
Scale Properties

In a channel flow, the velocity fluctuations are inhomogeneous and anisotropic. Yet, the small-scale properties of the flow are expected to behave in an isotropic manner in the very-large-Reynolds-number limit. We consider the statistical properties of small-scale velocity fluctuations in a turbulent channel flow at moderately high Reynolds number ($Re_{\unicode[STIX]{x1D70F}}\approx 1000$), using the Johns Hopkins University Turbulence Database. Away from the wall, in the logarithmic layer, the skewness of the normal derivative of the streamwise velocity fluctuation is approximately constant, of order 1, while the Reynolds number based on the Taylor scale is $R_{\unicode[STIX]{x1D706}}\approx 150$. This defines a small-scale anisotropy that is stronger than in turbulent homogeneous shear flows at comparable values of $R_{\unicode[STIX]{x1D706}}$. In contrast, the vorticity–strain correlations that characterize homogeneous isotropic turbulence are nearly unchanged in channel flow even though they do vary with distance from the wall with an exponent that can be inferred from the local dissipation. Our results demonstrate that the statistical properties of the fluctuating velocity gradient in turbulent channel flow are characterized, on one hand, by observables that are insensitive to the anisotropy, and behave as in homogeneous isotropic flows, and on the other hand by quantities that are much more sensitive to the anisotropy. How this seemingly contradictory situation emerges from the simultaneous action of the flux of energy to small scales and the transport of momentum away from the wall remains to be elucidated.

Sign in / Sign up

Export Citation Format

Share Document