Tikisuchus romeri, a new rauisuchid reptile from the Late Triassic of India

1987 ◽  
Vol 61 (4) ◽  
pp. 787-793 ◽  
Author(s):  
Sankar Chatterjee ◽  
Pranab K. Majumdar

Tikisuchus romeri n. gen. and sp. is a rauisuchid thecodontian from the Late Triassic Tiki Formation of India and is the first rauisuchid material to be recorded from Asia. The skull is very large in relation to the presacral length and is equipped with sharp, serrated teeth. The astragalus has a very high dorsal process and the calcaneal tuber is short; the ankle joint is of “crocodile-normal” type.The rauisuchids were the dominant terrestrial predators during the Triassic and shared similar ecological niches with the emerging theropods. The agility and superior locomotion of theropods may have contributed to their success and to their eventual replacement of the rauisuchids at the end of the Triassic.

2006 ◽  
Vol 27 (3) ◽  
pp. 202-205 ◽  
Author(s):  
Dominik C. Meyer ◽  
Clement M.L. Werner ◽  
Tobias Wyss ◽  
Patrick Vienne

Background: Clinical measurement of passive dorsiflexion of the ankle joint is essential for the diagnosis of various pathologic conditions of the foot and ankle but is of unreliable precision with high interobserver variability in nonweightbearing tests. This work was designed to develop and test a precise, standardized, and reliable technique for measurement of passive and active ankle range of motion. Methods: The proposed measurement tool is composed of two mobile parallelograms, one attached to the tibia, the second one to the plantar surface of the foot. The parallelograms are connected with a hinge with an angular scale to measure the angle between the foot and tibia. Results: Interobserver correlation between clinical measure-ments for maximal passive foot dorsiflexion were 0.03 with knee extension and 0.38 with knee flexion, while for measurements with the proposed tool they reached 0.89 and 0.97, respectively, with a mean measurement error of 0.9 degrees. Intraobserver correlations reached values of r = 0.98 and 0.99. Conclusions: The proposed tool allows measurement of the ankle range of motion with very high precision and reproducibility far superior to clinical measurements. Clinical Relevance: Precise measurement of ankle range of motion is clinically challenging. With the use of the proposed tool, measurement precision and reliability are decisively improved.


Author(s):  
Stanisław Z. Mikulski ◽  
Holly J. Stein

In the paper we present the results of Re-Os isotopic studies as well as the mineralogical and geochemical characteristic of bornite veinlets with chalcopyrite ± chalcocite margins and chalcopyrite veinlets that are parallel to sub-parallel to bedding in Kupferschiefer from the underground workings of the Lubin and Polkowice mines in SW Poland. Kupferschiefer samples are of grade from 2.5 to 14.2% Cu and with silver admixtures from 40 to 900 ppm and organic matter contents ca. 6%. The ratios of Co/Ni = 0.1–0.7, V/Cr = 4–17 and Fe2O3/C org = 0.6–1.9 are in the range of values typical for the Kupferschiefer. Besides, copper sulphides, which commonly contain silver admixtures (e.g. chalcocite – 0.44–5.03 wt.%., bornite – 0.33–0.77 wt.%., chalcopyrite 0.09–0.20 wt.%) are associated with minor galena, sphalerite, Ag-minerals and common pyrite framboids. In the isotopically analysed bornite and chalcopyrite samples Re concentrations ranging from 5.7 to 12 ppb, and total Os concentrations ranging from 27 to 52 ppt. Significant common Os is present in all of the analysed sulphides. The isotopic ratios of 187Re/188Os are very high (range: 2269–2942), and of 187Os/188Os from 9.8 to ca. 12.4. Re-Os model ages calculated for these isotopic ratios are in the range from 256 to 268 Ma and for one of the chalcopyrite veinlet was 217 ±2 Ma. Taking into the account the values of the isotopic ratios of 187Re/188Os, it was possible to construct the Re-Os isochrone age for A Model 1 regression based on four different samples. They yields age of 212 ±7 Ma, with an initial 187Os/188Os ratio of 2.13 ±0.31 (MSWD = 1.3). Re-Os isochrone age indicates for bornite and chalcopyrite crystallization event of the Ag-bearing Cu sulphide mineralization within the Kupferschiefer in the Late Triassic (Norian), ca. 212 ±7 Ma.


1966 ◽  
Vol 8 (1) ◽  
pp. 41-59 ◽  
Author(s):  
H. J. Muller ◽  
W. D. Kaplan

Examination, in the salivary gland nuclei of D. melanogaster males, of four cases of translocation between the X and fourth chromosome, involving breaks of the X in widely different positions, disclosed no influence of the rearrangement on the width, morphology or chromatin-staining of either of the separated parts of the X, or on the fourth chromosome. Both parts of the single X were distinctly narrower than were the double major autosomes, as is true for the X of normal males but not for the double X of females. At the junction between a portion of a translocated single X and the double fourth chromosomes the transition in width, morphology and staining was abrupt and striking. As in structurally normal males, however, the parts of a single X, here removed from one another by the translocation, did appear to be somewhat swollen, as compared with half of a double chromosome, but to be correspondingly paler in stain, so as to indicate an unaltered amount of chromatin (see also Offermann, 1936; Rudkin, 1964; Pavan & Frota-Pessoa, 1964).The above evidence of the regional autonomy in characteristics of the different parts of the X studied by us, and also of the fourth chromosome, is in contrast to the lack of such autonomy found in translocation studies on mammals, where the X chromosome and that joined with it are subject to an influence diffusing along them and thus acting ‘wholesale’, rather than ‘piecemeal’. Likewise, a re-examination of the earlier genetic evidence on dosage compensation in Drosophila leads back again to a decidedly ‘piecemeal’ interpretation of its operation and evolution, according to which most genes in the X, and sometimes even different phases of the action of the same gene, have their own system of separately evolved, scattered compensators, which are also located in the X.The fact that two so differently working compensation mechanisms as those in Drosophila and mammals have evolved independently to serve the same function emphasizes the importance of that function. That is, it points up the survival value of having the effectiveness of normal genes regulated to a very exact level. For the compensation enables the single representative of the X in the male cell to become equivalent to the two representatives of the X in the female cell. Moreover, this equivalence is of a considerably finer grade than that already afforded by the phenomenon termed ‘dominance’, which has evolved to meet the same basic need (that of phenotypic stabilization), and which has, incidentally, made even the uncompensated effects of one and two doses of either sex-linked or autosomal normal genes not readily distinguishable in most cases.Taken by itself, the ‘piecemeal’ mechanism of Drosophila provides far stronger evidence for this conclusion than does the ‘wholesale’ mechanism in mammals. For the former must have required the establishment of far more numerous mutational steps and, taken individually, each of these steps was of correspondingly lesser survival value. Since they nevertheless affected fitness enough to become established, it also follows that usually a normal gene—or at any rate one of the kinds whose mutants have usually been studied—confers a significantly higher fitness when not heterozygous for such a mutation in it, despite the seeming recessiveness of most mutations. Thus, the expression ‘normal gene’ continues to have a very high validity.


Postosuchus kirkpatricki (n.g., n.sp.) is a large, gracile, carnivorous thecodontian from the late Triassic Dockum Group of Texas. The species is characterized by its erect and facultative bipedal gait, highly advanced pelvis with slightly open acetabulum and footed pubis. The teeth are large, highly serrated, deeply set in sockets, and show a wave-like replacement pattern. Some flexibility in the palate and the lower jaw permitted the animal to swallow large chunks of flesh. Postosuchus was the arch predator of its time, and lived in the interfluves or upland regions along with aetosaurs, coelurosaurs, and ictidosaurs. The quarry’s thanatocoenose probably reflects autochthonous burials of a Dockum community, perhaps in consequence of a catastrophic event such as a flash flood. Although Postosuchus exhibits many carnosaurian traits, its ankle joint is of ‘crocodile-normal’ pattern, which suggests its pseudosuchian affinity. All Triassic reptiles previously thought to be carnosaurs are considered herein as advanced thecodontians; true carnosaurs probably appeared in post-Triassic time. Postosuchus is grouped with Poposaurus , Teratosaurus , Arizonasaurus and the unnamed 'Warwick archosaur’ in the family Poposauridae. The Poposauridae and Rauisuchidae are placed in the infraorder Rauisuchia. Tyrannosaurs probably evolved from poposaurids, as indicated by the correlation between skull, pelvis and ankle structure.


1994 ◽  
Vol 7 ◽  
pp. 243-254
Author(s):  
Reese E. Barrick

Dinosaurs were an abundant group of reptiles that originated in the mid-Triassic. They rapidly diversified, filling all of the ecological niches for large-bodied terrestrial vertebrates by the Late Triassic and dominated this landscape for 163 m.y. Yet due to the lack of direct evidence little is known about their metabolism. The question as to whether dinosaurs were “warm-blooded” or “cold-blooded” has been debated for over 25 years. Knowledge of dinosaur thermal physiology is critical if we are to understand how they lived and functioned. This knowledge can then be used to help answer questions regarding to their origin, diversification, and their eventual extinction. The question that is being resolved here is, “How do you stick a thermometer into dinosaur bone?”.


1994 ◽  
Vol 144 ◽  
pp. 593-596
Author(s):  
O. Bouchard ◽  
S. Koutchmy ◽  
L. November ◽  
J.-C. Vial ◽  
J. B. Zirker

AbstractWe present the results of the analysis of a movie taken over a small field of view in the intermediate corona at a spatial resolution of 0.5“, a temporal resolution of 1 s and a spectral passband of 7 nm. These CCD observations were made at the prime focus of the 3.6 m aperture CFHT telescope during the 1991 total solar eclipse.


1988 ◽  
Vol 102 ◽  
pp. 79-81
Author(s):  
A. Goldberg ◽  
S.D. Bloom

AbstractClosed expressions for the first, second, and (in some cases) the third moment of atomic transition arrays now exist. Recently a method has been developed for getting to very high moments (up to the 12th and beyond) in cases where a “collective” state-vector (i.e. a state-vector containing the entire electric dipole strength) can be created from each eigenstate in the parent configuration. Both of these approaches give exact results. Herein we describe astatistical(or Monte Carlo) approach which requires onlyonerepresentative state-vector |RV> for the entire parent manifold to get estimates of transition moments of high order. The representation is achieved through the random amplitudes associated with each basis vector making up |RV>. This also gives rise to the dispersion characterizing the method, which has been applied to a system (in the M shell) with≈250,000 lines where we have calculated up to the 5th moment. It turns out that the dispersion in the moments decreases with the size of the manifold, making its application to very big systems statistically advantageous. A discussion of the method and these dispersion characteristics will be presented.


Author(s):  
Y. L. Chen ◽  
S. Fujlshiro

Metastable beta titanium alloys have been known to have numerous advantages such as cold formability, high strength, good fracture resistance, deep hardenability, and cost effectiveness. Very high strength is obtainable by precipitation of the hexagonal alpha phase in a bcc beta matrix in these alloys. Precipitation hardening in the metastable beta alloys may also result from the formation of transition phases such as omega phase. Ti-15-3 (Ti-15V- 3Cr-3Al-3Sn) has been developed recently by TIMET and USAF for low cost sheet metal applications. The purpose of the present study was to examine the aging characteristics in this alloy.The composition of the as-received material is: 14.7 V, 3.14 Cr, 3.05 Al, 2.26 Sn, and 0.145 Fe. The beta transus temperature as determined by optical metallographic method was about 770°C. Specimen coupons were prepared from a mill-annealed 1.2 mm thick sheet, and solution treated at 827°C for 2 hr in argon, then water quenched. Aging was also done in argon at temperatures ranging from 316 to 616°C for various times.


Author(s):  
J. Temple Black

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.


Author(s):  
Cecil E. Hall

The visualization of organic macromolecules such as proteins, nucleic acids, viruses and virus components has reached its high degree of effectiveness owing to refinements and reliability of instruments and to the invention of methods for enhancing the structure of these materials within the electron image. The latter techniques have been most important because what can be seen depends upon the molecular and atomic character of the object as modified which is rarely evident in the pristine material. Structure may thus be displayed by the arts of positive and negative staining, shadow casting, replication and other techniques. Enhancement of contrast, which delineates bounds of isolated macromolecules has been effected progressively over the years as illustrated in Figs. 1, 2, 3 and 4 by these methods. We now look to the future wondering what other visions are waiting to be seen. The instrument designers will need to exact from the arts of fabrication the performance that theory has prescribed as well as methods for phase and interference contrast with explorations of the potentialities of very high and very low voltages. Chemistry must play an increasingly important part in future progress by providing specific stain molecules of high visibility, substrates of vanishing “noise” level and means for preservation of molecular structures that usually exist in a solvated condition.


Sign in / Sign up

Export Citation Format

Share Document