Correction to 'Determination of actual snow-covered area using Landsat TM and digital elevation model data in Glacier National Park, Montana'

Polar Record ◽  
2002 ◽  
Vol 38 (204) ◽  
pp. 53-55 ◽  
Author(s):  
Philip T. Giles
Keyword(s):  
National Park ◽  
Mean Value ◽  
Glacier National Park ◽  
Snow Covered Area ◽  
Covered Area ◽  
Digital Elevation ◽  
Sloping Terrain ◽  
Elevation Model ◽  
Digital Elevation Model Data ◽  
Factor C

AbstractIn the article by Hall and others (1995), a topographic correction factor (C) was developed for estimating actual land area by taking into account the effect of sloping terrain. An error that was made during image processing resulted in values of C being exaggerated. For this note, values of C for the example landscape in Glacier National Park were recalculated, and the results with and without the error are compared. It is shown that the error caused the mean value of C reported for the example landscape to be exaggerated by a factor of 2.62 times.

Determination of actual snow-covered area using Landsat TM and digital elevation model data in Glacier National Park, Montana

Polar Record ◽  
1995 ◽  
Vol 31 (177) ◽  
pp. 191-198 ◽  
Author(s):  
Dorothy K. Hall ◽  
James L. Foster ◽  
Janet Y.L. Chien ◽  
George A. Riggs
Keyword(s):  
Snow Cover ◽  
Digital Elevation Model ◽  
National Park ◽  
Glacier National Park ◽  
Modis Data ◽  
Snow Covered Area ◽  
Covered Area ◽  
Digital Elevation ◽  
The Future ◽  
Elevation Model

AbstractIn the future, data from the moderate resolution imaging spectroradiometer (MODIS) will be employed to map snow in an automated environment at a resolution of 250 m to 1 km. Using Landsat thematic mapper (TM) data, an algorithm, SNOMAP, has been developed to map snow-covered area. This algorithm will be used, with appropriate modification, with MODIS data following the launch of the first Earth Observing System (EOS) platform in 1998. SNOMAP has been shown to be successful in mapping snow in a variety of areas using TM data. However, significant errors may be present in mountainous areas due to effects of topography. To increase the accuracy of mapping global snow-covered area in the future using MODIS data, digital elevation model (DEM) data have been registered to TM data for parts of Glacier National Park, Montana, so that snow cover on mountain slopes can be mapped. This paper shows that the use of DEM data registered to TM data increases the accuracy of mapping snow-covered area. Using SNOMAP on a subscene within the 14 March 1991 TM scene of northwestern Montana, 215 km2 of snow is mapped when TM data are used alone to map the snow cover. We show that about 1062 km2 of snow are actually present as measured when the TM and DEM data are registered. Approximately five times more snow is present when the effects of topography are considered for this subscene, which is in a rugged area in Glacier National Park. A simple model has been developed to determine the relationship between terrain relief and the amount of correction that must be applied to map actual snow-covered area in Glacier National Park using satellite data alone.

scholarly journals Modelling Snowmelt Runoff from Tropical Andean Glaciers under Climate Change Scenarios in the Santa River Sub-Basin (Peru)

Water ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 3535
Author(s):  
Elmer Calizaya ◽  
Abel Mejía ◽  
Elgar Barboza ◽  
Fredy Calizaya ◽  
Fernando Corroto ◽  
...  
Keyword(s):  
Climate Change ◽  
Climatic Data ◽  
Climate Change Scenarios ◽  
Snowmelt Runoff ◽  
Snow Covered Area ◽  
Covered Area ◽  
Digital Elevation ◽  
Rcp 8.5 ◽  
Andean Glaciers ◽  
Elevation Model

Effects of climate change have led to a reduction in precipitation and an increase in temperature across several areas of the world. This has resulted in a sharp decline of glaciers and an increase in surface runoff in watersheds due to snowmelt. This situation requires a better understanding to improve the management of water resources in settled areas downstream of glaciers. In this study, the snowmelt runoff model (SRM) was applied in combination with snow-covered area information (SCA), precipitation, and temperature climatic data to model snowmelt runoff in the Santa River sub-basin (Peru). The procedure consisted of calibrating and validating the SRM model for 2005–2009 using the SRTM digital elevation model (DEM), observed temperature, precipitation and SAC data. Then, the SRM was applied to project future runoff in the sub-basin under the climate change scenarios RCP 4.5 and RCP 8.5. SRM patterns show consistent results; runoff decreases in the summer months and increases the rest of the year. The runoff projection under climate change scenarios shows a substantial increase from January to May, reporting the highest increases in March and April, and the lowest records from June to August. The SRM demonstrated consistent projections for the simulation of historical flows in tropical Andean glaciers.

scholarly journals Extracting High Resolution Snow Distribution Information with Inexpensive Autonomous Cameras

10.29007/93gh ◽  
2018 ◽  
Author(s):  
Pauline Millet ◽  
Hendrik Huwald ◽  
Steven V. Weijs
Keyword(s):  
High Resolution ◽  
Low Cost ◽  
Time Lapse ◽  
Distortion Correction ◽  
Snow Covered Area ◽  
Covered Area ◽  
Digital Elevation ◽  
Snow Distribution ◽  
Elevation Model ◽  
Time Lapse Photography

This study details a procedure to derive high resolution snow cover information using low-cost autonomous cameras. Images from time lapse photography of target areas are used to obtain temporally resolved binary snow-covered area information. Various image processing steps, such as distortion correction, alignment, projection using the Digital Elevation Model (DEM), and classification using clustering are described. Several innovations, such as matching the mountain silhouette with the DEM, and application of specific filters are described to make this terrestrial remote sensing method generally applicable to derive valuable snow information.

Urban Flood Mapping

2017 ◽  
Author(s):  
Indra Riyanto ◽  
Lestari Margatama
Keyword(s):  
Natural Disasters ◽  
Satisfying Condition ◽  
Three Dimensions ◽  
Urban Flood ◽  
Digital Elevation ◽  
Elevation Data ◽  
Recent Occurrence ◽  
Elevation Model ◽  
Digital Elevation Model Data ◽  
Potential Area

The recent degradation of environment quality becomes the prime cause of the recent occurrence of natural disasters. It also contributes in the increase of the area that is prone to natural disasters. Flood history data in Jakarta shows that flood occurred mainly during rainy season around January – February each year, but the flood area varies each year. This research is intended to map the flood potential area in DKI Jakarta by segmenting the Digital Elevation Model data. The data used in this research is contour data obtained from DPP–DKI with the resolution of 1 m. The data processing involved in this research is extracting the surface elevation data from the DEM, overlaying the river map of Jakarta with the elevation data. Subsequently, the data is then segmented using watershed segmentation method. The concept of watersheds is based on visualizing an image in three dimensions: two spatial coordinates versus gray levels, in which there are two specific points; that are points belonging to a regional minimum and points at which a drop of water, if placed at the location of any of those points, would fall with certainty to a single minimum. For a particular regional minimum, the set of points satisfying the latter condition is called the catchments basin or watershed of that minimum, while the points satisfying condition form more than one minima are termed divide lines or watershed lines. The objective of this segmentation is to find the watershed lines of the DEM image. The expected result of the research is the flood potential area information, especially along the Ciliwung river in DKI Jakarta.

Precise computation of the direct and indirect topographic effects of Helmert's 2nd method of condensation using SRTM30 digital elevation model

2011 ◽  
Vol 1 (4) ◽  
pp. 305-312 ◽  
Author(s):  
Y. Wang
Keyword(s):  
Standard Deviation ◽  
Digital Elevation Model ◽  
Outer Zone ◽  
Mean Value ◽  
Constant Density ◽  
Topographic Effects ◽  
Topographic Effect ◽  
Digital Elevation ◽  
The Mean ◽  
Elevation Model

Precise computation of the direct and indirect topographic effects of Helmert's 2nd method of condensation using SRTM30 digital elevation modelThe direct topographic effect (DTE) and indirect topographic effect (ITE) of Helmert's 2nd method of condensation are computed using the digital elevation model (DEM) SRTM30 in 30 arc-seconds globally. The computations assume a constant density of the topographic masses. Closed formulas are used in the inner zone of half degree, and Nagy's formulas are used in the innermost column to treat the singularity of integrals. To speed up the computations, 1-dimensional fast Fourier transform (1D FFT) is applied in outer zone computations. The computation accuracy is limited to 0.1 mGal and 0.1cm for the direct and indirect effect, respectively.The mean value and standard deviation of the DTE are -0.8 and ±7.6 mGal over land areas. The extreme value -274.3 mGal is located at latitude -13.579° and longitude 289.496°, at the height of 1426 meter in the Andes Mountains. The ITE is negative everywhere and has its minimum of -235.9 cm at the peak of Himalayas (8685 meter). The standard deviation and mean value over land areas are ±15.6 cm and -6.4 cm, respectively. Because the Stokes kernel does not contain the zero and first degree spherical harmonics, the mean value of the ITE can't be compensated through the remove-restore procedure under the Stokes-Helmert scheme, and careful treatment of the mean value in the ITE is required.

scholarly journals THE DESIGN AND PRODUCT OF NATIONAL 1:1000000 CARTOGRAPHIC DATA OF TOPOGRAPHIC MAP

2016 ◽  
Vol XLI-B2 ◽  
pp. 245-249
Author(s):  
Guizhi Wang
Keyword(s):  
Line Graph ◽  
Topographic Map ◽  
Dynamic Update ◽  
Structure Database ◽  
Database Structure ◽  
Digital Elevation ◽  
Mapping Technology ◽  
Elevation Model ◽  
Digital Elevation Model Data ◽  
Information Database

National administration of surveying, mapping and geoinformation started to launch the project of national fundamental geographic information database dynamic update in 2012. Among them, the 1:50000 database was updated once a year, furthermore the 1:250000 database was downsized and linkage-updated on the basis. In 2014, using the latest achievements of 1:250000 database, comprehensively update the 1:1000000 digital line graph database. At the same time, generate cartographic data of topographic map and digital elevation model data. This article mainly introduce national 1:1000000 cartographic data of topographic map, include feature content, database structure, Database-driven Mapping technology, workflow and so on.

scholarly journals Paleovalleys mapping using remote sensing

2014 ◽  
Vol XL-5 ◽  
pp. 83-86
Author(s):  
A.B. Baibatsha
Keyword(s):  
Remote Sensing ◽  
Groundwater Resources ◽  
Alluvial Deposits ◽  
North East ◽  
Digital Elevation ◽  
Landsat 7 ◽  
Tectonic Zones ◽  
Materials Used ◽  
Elevation Model ◽  
Digital Elevation Model Data

For work materials used multispectral satellite imagery Landsat (7 channels), medium spatial resolution (14,25–90 m) and a digital elevation model (data SRTM). For interpretation of satellite images and especially their infrared and thermal channels allocated buried paleovalleys pre-paleogene age. Their total length is 228 km. By manifestation of the content of remote sensing paleovalleys distinctly divided into two types, long ribbon-like read in materials and space survey highlights a network of small lakes. By the nature of the relationship established that the second type of river paleovalleys flogs first. On this basis, proposed to allocate two uneven river paleosystem. The most ancient paleovalleys first type can presumably be attributed to karst erosion, blurry chalk and carbon deposits foundation. Paleovalleys may include significant groundwater resources as drinking and industrial purposes. Also we can control the position paleovalleys zinc and bauxite mineralization area and alluvial deposits include uranium mineralization valleys infiltration type and placer gold. Direction paleovalleys choppy, but in general they have a north-east orientation, which is controlled by tectonic zones of the foundation. These zones are defined as the burial place themselves paleovalleys and position of karst cavities in areas interfacing with other structures orientation. The association of mineralization to the caverns in the beds paleovalleys could generally present conditions of formation of mineralization and carry it to the "Niagara" type. The term is obviously best reflects the mechanism of formation of these ores.

The Coupling Relationship between Forest Vegetation and Terrain of Daliuta Mine

2014 ◽  
Vol 641-642 ◽  
pp. 1191-1194 ◽  
Author(s):  
Dong Wen Liu ◽  
Zhi Yong Qiao ◽  
Ting Ting Wei ◽  
Shu Jiang ◽  
Ya Kai Chen ◽  
...  
Keyword(s):  
Digital Terrain Model ◽  
Vegetation Coverage ◽  
Terrain Model ◽  
Digital Terrain ◽  
Digital Elevation ◽  
Object Use ◽  
Trend Data ◽  
Elevation Model ◽  
Digital Elevation Model Data ◽  
Evolution Trend

Taking Daliuta mine as research object, use its 2002, 2011 two same period Landsat TM/ ETM and remote sensing image as the data source, use pixel dichotomy to get its vegetation coverage evolution trend data; Use DEM digital elevation model data in the region to generate digital terrain model based on ArcGIS, and make overlay analysis with the vegetation coverage evolution trend data to study the relationship between the vegetation coverage and terrain factor of the mine area. The results showed that: From 2002 to 2011, the vegetation coverage evolution trend of Daliuta mining mainly moderate improvement and significantly improvement, and concentrated in middle altitude, low slope, sunny area.

scholarly journals Morphological and Soil Determinants of Forest Cover Changes in Świętokrzyski National Park and Its Buffer Zone in the last 200 Years

2015 ◽  
Vol 34 (1) ◽  
pp. 55-63 ◽  
Author(s):  
Tadeusz Ciupa ◽  
Roman Suligowski ◽  
Grzegorz Wałek
Keyword(s):  
National Park ◽  
Forest Cover ◽  
Buffer Zone ◽  
Digital Elevation ◽  
Świętokrzyski National Park ◽  
Forest Cover Changes ◽  
Gis Methods ◽  
Elevation Model ◽  
The 19Th Century ◽  
Source Materials

Abstract The research described in the paper utilized GIS methods and comparative cartography in order to analyze changes in forest cover in the period 1800-2011 in the Świętokrzyski National Park (76.26 km²) and its buffer zone (207.86 km²). The research was done for predefined elevation intervals, slope gradients, and genetic soil types. Source materials included historical maps as well as a digital elevation model. Changes in forest cover were noted in spatial and temporal terms and were usually linked to morphology and soil type. While the 19th century was characterized by intense deforestation, this process reversed starting in the early 20th century. Nevertheless, forest cover in the study area has still not returned to its state from 1800.

Sign in / Sign up

Export Citation Format

Share Document