A new approach to determine the maximal singularity-free zone of 3-RPR planar parallel manipulator

Robotica ◽  
2011 ◽  
Vol 30 (6) ◽  
pp. 1005-1012 ◽  
Author(s):  
G. Abbasnejad ◽  
H. M. Daniali ◽  
S. M. Kazemi
Keyword(s):  
Parallel Manipulator ◽  
Orientation Angle ◽  
Parallel Manipulators ◽  
Swarm Optimization ◽  
New Approach ◽  
Free Zone ◽  
Reference Orientation ◽  
Planar Parallel Manipulator ◽  
Different Types ◽  
Moving Platform

SUMMARYThis paper presents a new algorithm to find the singularity-free cylindrical workspace of parallel manipulators. Because of the limited workspace of parallel manipulators cluttered with different types of singularities, a simple and robust technique to determine continuous singularity-free zones in the workspace of parallel manipulators is required. Here, the largest singularity-free cylinder within the workspace for any prescribed orientation ranging around a reference orientation angle of moving platform is determined. To this end, Particle Swarm Optimization is utilized to find the closest point on the singularity surface to the axis of the cylinder. By implementing the algorithm on 3-RPR planar parallel manipulator, the results show that this algorithm improves the efficiency and leads to significantly larger singularity-free workspace than those reported earlier.

Workspace Analysis and Going through Singularities of 5-Bar Symmetric Planar Parallel Manipulator by Automated Selective Actuation Mechanism

2012 ◽  
Vol 588-589 ◽  
pp. 1664-1668
Author(s):  
Syam Sundar ◽  
Vijay S. Rathore ◽  
Manoj K. Sahi ◽  
V. Upendran ◽  
Anjan Kumar Dash
Keyword(s):  
Closed Form ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
New Approach ◽  
Serial Manipulators ◽  
Actuation Mechanism ◽  
Geometric Conditions ◽  
Workspace Analysis ◽  
Planar Parallel Manipulator ◽  
Planar Parallel Manipulators

In this article‚ a new approach is presented to determine the various shapes of workspaces of 5 bar symmetric planar parallel manipulators. Here the shape of the workspace is determined by the number of ways the workspaces of the two serial manipulators intersect with each other. Geometric conditions are established in each case and area of each shape of workspace is determined in closed form. Singularity is another important consideration in the design of parallel manipulators. In this paper, an approach is presented to go through the singularity points using an automatic selective actuation mechanism. A prototype 5-bar planar manipulator is fabricated along with an automatic selective actuation mechanism demonstrating the manipulator going through the singularity points.

Sensitivity Analysis of Planar Parallel Manipulators

2008 ◽  
Author(s):  
Ste´phane Caro ◽  
Nicolas Binaud ◽  
Philippe Wenger
Keyword(s):  
Sensitivity Analysis ◽  
Parallel Manipulator ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Geometric Parameters ◽  
Sensitivity Coefficients ◽  
Planar Parallel Manipulator ◽  
Moving Platform ◽  
Conditioning Number ◽  
Planar Parallel Manipulators

This paper deals with the sensitivity analysis of planar parallel manipulators. A methodology is introduced to derive the sensitivity coefficients by means of the study of 3-RPR manipulators. As a matter of fact, the sensitivity coefficients of the pose of its moving platform to variations in the geometric parameters are expressed algebraically, the variations being defined both in Polar and Cartesian coordinates. The dexterity of the manipulator is also studied by means of the conditioning number of its normalized kinematic Jacobian matrix. As an illustrative example, the sensitivity of a symmetrical planar parallel manipulator is analyzed in detail. Finally, the accuracy of the manipulator is compared with its dexterity.

A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators

2012 ◽  
Vol 4 (4) ◽  
Author(s):  
Xin-Jun Liu ◽  
Chao Wu ◽  
Jinsong Wang
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Challenging Problem ◽  
Performance Indices ◽  
New Approach ◽  
Singular Configurations ◽  
Different Types ◽  
Force Transmissibility ◽  
Singular Configuration

Singularity analysis is one of the most important issues in the field of parallel manipulators. An approach for singularity analysis should be able to not only identify all possible singularities but also explain their physical meanings. Since a parallel manipulator is always out of control at a singularity and its neighborhood, it should work far from singular configurations. However, how to measure the closeness between a pose and a singular configuration is still a challenging problem. This paper presents a new approach for singularity analysis of parallel manipulators by taking into account motion/force transmissibility. Several performance indices are introduced to measure the closeness to singularities. By using these indices, a uniform “metric” can be found to represent the closeness to singularities for different types of nonredundant parallel manipulators.

A general dynamic model for a large-scale 2-DOF planar parallel manipulator

Robotica ◽  
1999 ◽  
Vol 17 (6) ◽  
pp. 675-683 ◽  
Author(s):  
Khaled R. Atia ◽  
M.P. Cartmell
Keyword(s):  
Dynamic Model ◽  
Parallel Manipulator ◽  
Large Scale ◽  
Parallel Manipulators ◽  
New Approach ◽  
Planar Parallel Manipulator ◽  
Two Degree Of Freedom ◽  
Planar Parallel Manipulators ◽  
Number Of Cells ◽  
General Dynamic

In this work a new concept of designing two degree of freedom (2-DOF) planar parallel manipulators (PPMs) is presented. With this design the manipulator's workspace can be increased by increasing the number of cells in the manipulator. A general dynamic model is formulated for the manipulator with any number of cells. The model is adapted for SCARA and ADEPT configurations, and a new approach for balancing these type of manipulators is proposed.

Structure Synthesis of 3-RRS Type Spatial Compliant Parallel Manipulator

2010 ◽  
Vol 44-47 ◽  
pp. 1375-1379
Author(s):  
Da Chang Zhu ◽  
Li Meng ◽  
Tao Jiang
Keyword(s):  
Parallel Manipulator ◽  
Compliant Mechanisms ◽  
Screw Theory ◽  
Weight Ratio ◽  
Parallel Manipulators ◽  
Robot System ◽  
New Approach ◽  
Structure Synthesis ◽  
Rigid Joints ◽  
Type 3

Parallel manipulators has been extensively studied by virtues or its high force-to-weight ratio and widely spread applications such as vehicle or flight simulator, a machine tool and the end effector of robot system. However, as each limb includes several rigid joints, assembling error is demanded strictly, especially in precision measurement and micro-electronics. On the other hand, compliant mechanisms take advantage of recoverable deformation to transfer or transform motion, force, or energy and the benefits of compliant mechanisms mainly come from the elimination of traditional rigid joints, but the traditional displacement method reduce the stiffness of spatial compliant parallel manipulators. In this paper, a new approach of structure synthesis of 3-DoF rotational compliant parallel manipulators is proposed. Based on screw theory, the structures of RRS type 3-DoF rotational spatial compliant parallel manipulator are developed. Experiments via ANSYS are conducted to give some validation of the theoretical analysis.

scholarly journals Workspace Delineation of Cable-Actuated Parallel Manipulators

2004 ◽  
Author(s):  
Ethan Stump ◽  
Vijay Kumar
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Extensive Literature ◽  
Reachable Workspace ◽  
Planar Parallel Manipulator ◽  
Analytic Expressions

While there is extensive literature available on parallel manipulators in general, there has been much less attention given to cable-driven parallel manipulators. In this paper, we address the problem of analyzing the reachable workspace using the tools of semi-definite programming. We build on earlier work [1, 2] done using similar techniques by deriving limiting conditions that allow us to compute analytic expressions for the boundary of the reachable workspace. We illustrate this computation for a planar parallel manipulator with four actuators.

Singularity robust inverse dynamics of planar 2-RPR parallel manipulators

2004 ◽  
Vol 218 (7) ◽  
pp. 721-730 ◽  
Author(s):  
S Kemal Ider
Keyword(s):  
Parallel Manipulator ◽  
Inverse Dynamics ◽  
Full Rank ◽  
Parallel Manipulators ◽  
Parallel Robots ◽  
Dynamic Equations ◽  
Revolute Joints ◽  
Planar Parallel Manipulator ◽  
Pass Through ◽  
Full Utilization

In planar parallel robots, limitations occur in the functional workspace because of interference of the legs with each other and because of drive singularities where the actuators lose control of the moving platform and the actuator forces grow without bounds. A 2-RPR (revolute, prismatic, revolute joints) planar parallel manipulator with two legs that minimizes the interference of the mechanical components is considered. Avoidance of the drive singularities is in general not desirable since it reduces the functional workspace. An inverse dynamics algorithm with singularity robustness is formulated allowing full utilization of the workspace. It is shown that if the trajectory is planned to satisfy certain conditions related to the consistency of the dynamic equations, the manipulator can pass through the drive singularities while the actuator forces remain stable. Furthermore, for finding the actuator forces in the vicinity of the singular positions a full rank modification of the dynamic equations is developed. A deployment motion is analysed to illustrate the proposed approach.

Dynamic Modeling of a Parallel Manipulator With Three Translational Degrees of Freedom

1998 ◽  
Author(s):  
Richard Stamper ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Close Agreement ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Kinematic Structure ◽  
End Effector ◽  
Moving Platform ◽  
Euler Approach ◽  
Computationally Intensive

Abstract The dynamics of a parallel manipulator with three translational degrees of freedom are considered. Two models are developed to characterize the dynamics of the manipulator. The first is a traditional Lagrangian based model, and is presented to provide a basis of comparison for the second approach. The second model is based on a simplified Newton-Euler formulation. This method takes advantage of the kinematic structure of this type of parallel manipulator that allows the actuators to be mounted directly on the base. Accordingly, the dynamics of the manipulator is dominated by the mass of the moving platform, end-effector, and payload rather than the mass of the actuators. This paper suggests a new method to approach the dynamics of parallel manipulators that takes advantage of this characteristic. Using this method the forces that define the motion of moving platform are mapped to the actuators using the Jacobian matrix, allowing a simplified Newton-Euler approach to be applied. This second method offers the advantage of characterizing the dynamics of the manipulator nearly as well as the Lagrangian approach while being less computationally intensive. A numerical example is presented to illustrate the close agreement between the two models.

Path Tracking of Parallel Manipulators in the Presence of Force Singularity

2005 ◽  
Vol 127 (4) ◽  
pp. 550-563 ◽  
Author(s):  
C. K. Kevin Jui ◽  
Qiao Sun
Keyword(s):  
Motion Planning ◽  
Parallel Manipulator ◽  
Inverse Dynamics ◽  
Parallel Manipulators ◽  
Path Tracking ◽  
Singularity Avoidance ◽  
Design Complexity ◽  
Actuation Redundancy ◽  
Planar Parallel Manipulator ◽  
Simulation Results

Parallel manipulators are uncontrollable at force singularities due to the infeasibly high actuator forces required. Existing remedies include the application of actuation redundancy and motion planning for singularity avoidance. While actuation redundancy increases cost and design complexity, singularity avoidance reduces the effective workspace of a parallel manipulator. This article presents a path tracking type of approach to operate parallel manipulators when passing through force singularities. We study motion feasibility in the neighborhood of singularity and conclude that a parallel manipulator may track a path through singular poses if its velocity and acceleration are properly constrained. Techniques for path verification and tracking are presented, and an inverse dynamics algorithm that takes actuator bounds into account is examined. Simulation results for a planar parallel manipulator are given to demonstrate the details of this approach.

Kinematic Synthesis of a Spatial 3-RPS Parallel Manipulator

2003 ◽  
Vol 125 (1) ◽  
pp. 92-97 ◽  
Author(s):  
Han Sung Kim ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Point Of View ◽  
Dimensional Synthesis ◽  
Kinematic Synthesis ◽  
End Effector ◽  
Solution Methods ◽  
Moving Platform ◽  
At Will

This paper presents the design of spatial 3-RPS parallel manipulators from dimensional synthesis point of view. Since a spatial 3-RPS manipulator has only 3 degrees of freedom, its end effector cannot be positioned arbitrarily in space. It is shown that at most six positions and orientations of the moving platform can be prescribed at will and, given six prescribed positions, there are at most ten RPS chains that can be used to construct up to 120 manipulators. Further, solution methods for fewer than six prescribed positions are also described.

Sign in / Sign up

Export Citation Format

Share Document