Some supracrustal (S-type) granites of the Lachlan Fold Belt

Author(s):  
A. J. R. White ◽  
B. W. Chappell

ABSTRACTS-type granites have properties that are a result of their derivation from sedimentary source rocks. Slightly more than half of the granites exposed in the Lachlan Fold Belt of southeastern Australia are of this type. These S-type rocks occur in all environments ranging from an association with migmatites and high grade regional metamorphic rocks, through an occurrence as large batholiths, to those occurring as related volcanic rocks. The association with high grade metamorphic rocks is uncommon. Most of the S-type granites were derived from deeper parts of the crust and emplaced at higher levels; hence their study provides insights into the nature of that deeper crust. Only source rocks that contain enough of the granite-forming elements (Si, Al, Na and K) to provide substantial quantities of melt can produce magmas and there is therefore a fertile window in the composition of these sedimentary rocks corresponding to feldspathic greywacke, from which granite magmas may be formed.In this paper, three contrasting S-type granite suites of the Lachlan Fold Belt are discussed. Firstly, the Cooma Granodiorite occurs within a regional metamorphic complex and is associated with migmatites. It has isotopic and chemical features matching those of the widespread Ordovician sediments that occur in the fold belt. Secondly, the S-type granites of the Bullenbalong Suite are found as voluminous contact-aureole and subvolcanic granites, with volcanic equivalents. These granites are all cordierite-bearing and have low Na2O, CaO and Sr, high Ni, strongly negative εNd and high 87Sr/86Sr, all indicative of S-type character. However, the values of these parameters are not as extreme as for the Cooma Granodiorite. Evidence is discussed to show that these granites were derived from a less mature, unexposed, deeper and older sedimentary source. Other hypotheses such as basalt mixing are discussed and can be ruled out. The Strathbogie Suite granites are more felsic but all are cordierite-bearing and have chemical and other features indicative of an immature sedimentary source. They are closely associated with cordierite-bearing volcanic rocks. The more felsic nature of the suite results in part from crystal fractionation. It is suggested that the magma may have entered this “crystal fractionation” stage of evolution because it was a slightly higher temperature magma produced from an even less mature sediment than the Bullenbalong Suite. The production of these S-type magmas is discussed in terms of vapour-absent melting of metagreywackes involving both muscovite and biotite. The production of a magma in this way is consistent with the low H2O contents and geological setting of S-type granites and volcanic rocks in the Lachlan Fold Belt.

Author(s):  
B. W. Chappell ◽  
A. J. R. White

ABSTRACTGranites and related volcanic rocks of the Lachlan Fold Belt can be grouped into suites using chemical and petrographic data. The distinctive characteristics of suites reflect source-rock features. The first-order subdivision within the suites is between those derived from igneous and from sedimentary source rocks, the I- and S-types. Differences between the two types of source rocks and their derived granites are due to the sedimentary source material having been previously weathered at the Earth's surface. Chemically, the S-type granites are lower in Na, Ca, Sr and Fe3+/Fe2+, and higher in Cr and Ni. As a consequence, the S-types are always peraluminous and contain Al-rich minerals. A little over 50% of the I-type granites are metaluminous and these more mafic rocks contain hornblende. In the absence of associated mafic rocks, the more felsic and slightly peraluminous I-type granites may be difficult to distinguish from felsic S-type granites. This overlap in composition is to be expected and results from the restricted chemical composition of the lowest temperature felsic melts. The compositions of more mafic I- and S-type granites diverge, as a result of the incorporation of more mafic components from the source, either as restite or a component of higher temperature melt. There is no overlap in composition between the most mafic I- and S-type granites, whose compositions are closest to those of their respective source rocks. Likewise, the enclaves present in the more mafic granites have compositions reflecting those of their host rocks, and probably in most cases, the source rocks.S-type granites have higher δ18O values and more evolved Sr and Nd isotopic compositions, although the radiogenic isotope compositions overlap with I-types. Although the isotopic compositions lie close to a mixing curve, it is thought that the amount of mixing in the source rocks was restricted, and occurred prior to partial melting. I-type granites are thought to have been derived from deep crust formed by underplating and thus are infracrustal, in contrast to the supracrustal S-type source rocks.Crystallisation of feldspars from felsic granite melts leads to distinctive changes in the trace element compositions of more evolved I- and S-type granites. Most notably, P increases in abundance with fractionation of crystals from the more strongly peraluminous S-type felsic melts, while it decreases in abundance in the analogous, but weakly peraluminous, I-type melts.


Granites and related volcanic rocks derived from both igneous and sedimentary source materials (I- and S-types) are widely distributed in the Palaeozoic Lachlan Fold Belt of southeastern Australia. Many of the granites contain material residual from partial melting of the source rocks, or restite, which enables attempts to be made to calculate source rock compositions. A few of the S-type granites are closely related to regional metamorphic rocks and are of relatively local derivation. Most, however, are intrusive into low-grade rocks and came from deeper levels in the crust; and volcanic equivalents are extensively developed. These dominant S-type rocks have chemical and isotopic properties unlike any known locally exposed sediments. For most of the S-types, and perhaps all of them, no mantle-derived component was present in the source. Chemical and isotopic data on the I-type granites suggest a variety of deep crust sources consisting of mantle-derived material showing differing amounts of isotopic evolution, according to the time since extraction from the mantle. These data do not favour a significant sedimentary component in the sources of even the most isotopically evolved I-type rocks. An origin of the I-type source rocks by crustal underplating is favoured, so that these sources were generally infra-crustal, whereas the S-type sources were of supra-crustal origin.


Author(s):  
B. W. Chappell

ABSTRACT:Granites within suites share compositional properties that reflect features of their source rocks. Variation within suites results dominantly from crystal fractionation, either of restite crystals entrained from the source, or by the fractional crystallisation of precipitated crystals. At least in the Lachlan Fold Belt, the processes of magma mixing, assimilation or hydrothermal alteration were insignificant in producing the major compositional variations within suites. Fractional crystallisation produced the complete variation in only one significant group of rocks of that area, the relatively high temperature Boggy Plain Supersuite. Modelling of Sr, Ba and Rb variations in the I-type Glenbog and Moruya suites and the S-type Bullenbalong Suite shows that variation within those suites cannot be the result of fractional crystallisation, but can be readily accounted for by restite fractionation. Direct evidence for the dominance of restite fractionation includes the close chemical equivalence of some plutonic and volcanic rocks, the presence of plagioclase cores that were not derived from a mingled mafic component, and the occurrence of older cores in many zircon crystals. In the Lachlan Fold Belt, granite suites typically evolved through a protracted phase of restite fractionation, with a brief episode of fractional crystallisation sometimes evident in the most felsic rocks. Evolution of the S-type Koetong Suite passed at about 69% SiO2 from a stage dominated by restite separation to one of fractional crystallisation. Other suites exist where felsic rocks evolved in the same way, but the more mafic rocks are absent. In terranes in which tonalitic rocks formed at high temperatures are more common, fractional crystallisation would be a more important process than was the case for the Lachlan Fold Belt.


Author(s):  
B. W. Chappell ◽  
W. E. Stephens

ABSTRACTI-type granites are produced by partial melting of older igneous rocks that are metaluminous and hence have not undergone any significant amount of chemical weathering. In the Lachlan Fold Belt of southeastern Australia and the Caledonian Fold Belt of Britain and Ireland there was a major magmatic event close to 400 Ma ago involving a massive introduction of heat into the crust. In both areas, that Caledonian-age event produced large volumes of I-type granite and related volcanic rocks. Granites of these two areas are not identical in character but they do show many similarities and are markedly different from many of the granites found in Mesozoic and younger fold belts. These younger, dominantly tonalitic, granites have compositions similar to those of the more felsic volcanic rocks forming at the present time above subduction zones. The Palaeozoic granites show little evidence of such a direct relationship to subduction. Within both the Caledonian and Lachlan belts there are some granites with a composition close to the younger tonalites. A particularly interesting case is that of the Tuross Head Tonalite of the Lachlan Fold Belt, which can be shown to have formed from slightly older source rocks by a process that we refer to as remagmatisation which has caused no significant change in composition. Since remagmatisation has reproduced the former source composition in the younger rocks, the wrong inference would result from the use of that composition to deduce the tectonic conditions at the time of formation of the tonalite. Granites, particularly the more mafic ones, will generally have compositions reflecting the compositions of their source rocks, and attempts to use granite compositions to reconstruct the tectonic environment at the time of formation of the granite may be looking instead at an older event. This is probably also the case for some andesites formed at continental margins.Several arguments can be presented in favour of a general model for the production of I-type granite sources by underplating the crust, so that the source rocks are infracrustal. Such sources may contain a component of subducted sediments with the consequence that some of the compositional characteristics of sedimentary rocks may be present in I-type source rocks and in the granites derived from them. The small bodies of mafic granite and gabbro associated with island arc volcanism have an origin that can be related to the partial melting of subducted oceanic crust or of mantle material overlying such slabs and can be referred to as M-type. These rocks have compositions indistinguishable from those of the related volcanic rocks, except for a small component of cumulative material. The tonalitic I-type granites characteristic of the Cordillera are probably derived from such M-type rocks of basaltic to andesitic composition, which had been underplated beneath the crust. Some of the more mafic tonalites of the Caledonian-age fold belts may also have had a similar origin. More commonly, however, the plutonic rocks of the older belts are granodioritic and these probably represent the products of partial melting of older tonalitic I-type source rocks in the deep crust, these having compositions and origins analogous to the tonalites of the Cordillera. In this way, multiple episodes of partial melting, accompanied by fractionation of the magmas, can produce quite felsic rocks from original source rocks in the mantle or mantle wedge. These are essential processes in the evolution of the crust, since the first stages in this process produce new crust and the later magmatic events redistribute this material vertically without the addition of significant amounts of new crust.


1988 ◽  
Vol 52 (366) ◽  
pp. 341-345 ◽  
Author(s):  
V. J. Morand

AbstractMargarite occurs in Ordovician black slate within the contact aureole of the Wyangala Batholith, in the Lachlan Fold Belt in New South Wales. This occurrence is the first described from New South Wales. It is a regional metamorphic mineral replacing chiastolitic andalusite, and contains up to 1.07% V2O3 and up to 0.37% Cr2O3. Vanadium and chromium here substitute for octahedral aluminium. Margarite is produced by a local reaction in which Ca and H2O are introduced into andalusite grains. There is a significant paragonite component in the margarite but negligible muscovite solid solution.


Minerals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 769 ◽  
Author(s):  
Marion Tichomirowa ◽  
Axel Gerdes ◽  
Manuel Lapp ◽  
Dietmar Leonhardt ◽  
Martin Whitehouse

The sources and critical enrichment processes for granite related tin ores are still not well understood. The Erzgebirge represents one of the classical regions for tin mineralization. We investigated the four largest plutons from the Western Erzgebirge (Germany) for the geochemistry of bulk rocks and autocrystic zircons and relate this information to their intrusion ages. The source rocks of the Variscan granites were identified as high-grade metamorphic rocks based on the comparison of Hf-O isotope data on zircons, the abundance of xenocrystic zircon ages as well as Nd and Hf model ages. Among these rocks, restite is the most likely candidate for later Variscan melts. Based on the evolution with time, we could reconstruct enrichment factors for tin and tungsten starting from the protoliths (575 Ma) that were later converted to high-grade metamorphic rocks (340 Ma) and served as sources for the older biotite granites (323–318 Ma) and the tin granites (315–314 Ma). This evolution involved a continuous enrichment of both tin and tungsten with an enrichment factor of ~15 for tin and ~7 for tungsten compared to the upper continental crust (UCC). Ore level concentrations (>10–100 times enrichment) were achieved only in the greisen bodies and dykes by subsequent hydrothermal processes.


2003 ◽  
Vol 50 (3) ◽  
pp. 319-330 ◽  
Author(s):  
P. F. Carr ◽  
C. L. Fergusson ◽  
J. W. Pemberton ◽  
G. P. Colquhoun ◽  
S. I. Murray ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document