scholarly journals Performance Assessment of BDS and GPS/BDS Velocity Estimation with Stand-alone Receiver

2015 ◽  
Vol 69 (4) ◽  
pp. 869-882 ◽  
Author(s):  
Kai Zheng ◽  
Long Tang
Keyword(s):  
Analytical Method ◽  
Weight Ratio ◽  
Satellite System ◽  
Velocity Estimation ◽  
Single Frequency ◽  
Satellite Velocity ◽  
Order Of Magnitude ◽  
Derivation Method ◽  
The Stability ◽  
Stability And Accuracy

Accurate velocity estimates are critical in highly dynamic positioning, airborne gravimetry, and geophysics applications. This paper focuses on the evaluation of the performance of velocity estimation using the BeiDou navigation satellite system (BDS) alone and integrated Global Positioning System (GPS)/BDS. Firstly, we analyse and compare the position-derivation method and analytical method which are used to calculate BDS satellite velocity from broadcast ephemeris. Results show that the accuracy of the estimated velocity by position-derivation method can be within 1 mm/s and better than that of the analytical method. Secondly, velocity estimation tests were carried out both in static and kinematic modes. The results show that: 1) the accuracy of BDS velocity estimation is in the same order of magnitude to that of GPS; 2) Compared with a single navigation system, the stability and accuracy of velocity estimation can be remarkably improved by integrated GPS/BDS, especially under conditions of poor observation; 3) Compared with Helmert variance component estimation, it is more appropriate and efficient to assign the weights of different types of observations using equivalent weight ratio. Finally, the ionospheric influence on velocity estimation with single-frequency observations can reach several mm/s; this influence can be significantly mitigated by using ionosphere-free combination observations.

scholarly journals Improving Stability and Accuracy of Cell Viability Evaluation by Fusion of Impedance Spectroscopy Information

2020 ◽  
Author(s):  
Yecheng Zhang ◽  
Mingji Wei ◽  
Rongbiao Zhang ◽  
Fei Zhang
Keyword(s):  
Cell Viability ◽  
Precision Medicine ◽  
Relative Error ◽  
Single Frequency ◽  
Support Vector ◽  
Fusion Method ◽  
Frequency Method ◽  
The Stability ◽  
Stability And Accuracy ◽  
Viability Evaluation

The increasing attention to precision medicine is widely paid in order to greatly improve the cure rate of cancer. Improving the stability and accuracy of cell viability evaluation is the key of precision medicine, for excess dosage of anti-cancer drugs not only kills the cancer cells, but also does harm to normal cells. Electrochemical impedance sensing (EIS) method is widely accepted as a label-free, non-invasive approach for real-time, online monitoring of cell viability. Due to the large effects of many influencing factors, the existing EIS methods that utilized single-frequency impedances show poor stability and low accuracy of cell viability evaluation. In this paper, we proposed a multi-physical information fusion method based on least squares support vector machine (LS-SVM) for improving the stability and accuracy of cell viability evaluation. The results show that the mean relative error of single-frequency method is about 0.08, while that of fusion method is about 0.04. It means that the prediction results of fusion method are more accurate than that of the single-frequency method. Moreover, the maximum relative error of single-frequency method is up to 0.5 due to the influencing of cell micromotion, while that of fusion method is below 0.07, showing that the fusion method is more stable than single-frequency method.

scholarly journals Estimation of fractional cycle bias for GPS/BDS-2/Galileo based on international GNSS monitoring and assessment system observations using the uncombined PPP model

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Jin Wang ◽  
Qin Zhang ◽  
Guanwen Huang
Keyword(s):  
Estimation Method ◽  
Satellite Orbit ◽  
Satellite System ◽  
Assessment System ◽  
Navigation Satellite ◽  
Dual Frequency ◽  
Fractional Cycle Bias ◽  
The Stability ◽  
High Consistency ◽  
Global Navigation Satellite

AbstractThe Fractional Cycle Bias (FCB) product is crucial for the Ambiguity Resolution (AR) in Precise Point Positioning (PPP). Different from the traditional method using the ionospheric-free ambiguity which is formed by the Wide Lane (WL) and Narrow Lane (NL) combinations, the uncombined PPP model is flexible and effective to generate the FCB products. This study presents the FCB estimation method based on the multi-Global Navigation Satellite System (GNSS) precise satellite orbit and clock corrections from the international GNSS Monitoring and Assessment System (iGMAS) observations using the uncombined PPP model. The dual-frequency raw ambiguities are combined by the integer coefficients (4,− 3) and (1,− 1) to directly estimate the FCBs. The details of FCB estimation are described with the Global Positioning System (GPS), BeiDou-2 Navigation Satellite System (BDS-2) and Galileo Navigation Satellite System (Galileo). For the estimated FCBs, the Root Mean Squares (RMSs) of the posterior residuals are smaller than 0.1 cycles, which indicates a high consistency for the float ambiguities. The stability of the WL FCBs series is better than 0.02 cycles for the three GNSS systems, while the STandard Deviation (STD) of the NL FCBs for BDS-2 is larger than 0.139 cycles. The combined FCBs have better stability than the raw series. With the multi-GNSS FCB products, the PPP AR for GPS/BDS-2/Galileo is demonstrated using the raw observations. For hourly static positioning results, the performance of the PPP AR with the three-system observations is improved by 42.6%, but only 13.1% for kinematic positioning results. The results indicate that precise and reliable positioning can be achieved with the PPP AR of GPS/BDS-2/Galileo, supported by multi-GNSS satellite orbit, clock, and FCB products based on iGMAS.

scholarly journals Underground Microseismic Event Monitoring and Localization within Sensor Networks

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2830
Author(s):  
Sili Wang ◽  
Mark P. Panning ◽  
Steven D. Vance ◽  
Wenzhan Song
Keyword(s):  
Sensor Networks ◽  
Real Time ◽  
Information Needs ◽  
Localization Algorithm ◽  
Distributed Sensors ◽  
Distributed Sensor ◽  
Microseismic Events ◽  
The Stability ◽  
Stability And Accuracy

Locating underground microseismic events is important for monitoring subsurface activity and understanding the planetary subsurface evolution. Due to bandwidth limitations, especially in applications involving planetarily-distributed sensor networks, networks should be designed to perform the localization algorithm in-situ, so that only the source location information needs to be sent out, not the raw data. In this paper, we propose a decentralized Gaussian beam time-reverse imaging (GB-TRI) algorithm that can be incorporated to the distributed sensors to detect and locate underground microseismic events with reduced usage of computational resources and communication bandwidth of the network. After the in-situ distributed computation, the final real-time location result is generated and delivered. We used a real-time simulation platform to test the performance of the system. We also evaluated the stability and accuracy of our proposed GB-TRI localization algorithm using extensive experiments and tests.

scholarly journals Improving DGNSS Performance through the Use of Network RTK Corrections

2021 ◽  
Vol 13 (9) ◽  
pp. 1621
Author(s):  
Duojie Weng ◽  
Shengyue Ji ◽  
Yangwei Lu ◽  
Wu Chen ◽  
Zhihua Li
Keyword(s):  
Carrier Phase ◽  
Local Area ◽  
Satellite System ◽  
High Accuracy ◽  
Single Frequency ◽  
Baseline Length ◽  
Low Latitude ◽  
Phase Measurements ◽  
Network Rtk ◽  
Global Navigation Satellite

The differential global navigation satellite system (DGNSS) is an enhancement system that is widely used to improve the accuracy of single-frequency receivers. However, distance-dependent errors are not considered in conventional DGNSS, and DGNSS accuracy decreases when baseline length increases. In network real-time kinematic (RTK) positioning, distance-dependent errors are accurately modelled to enable ambiguity resolution on the user side, and standard Radio Technical Commission for Maritime Services (RTCM) formats have also been developed to describe the spatial characteristics of distance-dependent errors. However, the network RTK service was mainly developed for carrier-phase measurements on professional user receivers. The purpose of this study was to modify the local-area DGNSS through the use of network RTK corrections. Distance-dependent errors can be reduced, and accuracy for a longer baseline length can be improved. The results in the low-latitude areas showed that the accuracy of the modified DGNSS could be improved by more than 50% for a 17.9 km baseline during solar active years. The method in this paper extends the use of available network RTK corrections with high accuracy to normal local-area DGNSS applications.

scholarly journals Single-epoch RTK performance assessment of tightly combined BDS-2 and newly complete BDS-3

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Wanke Liu ◽  
Mingkui Wu ◽  
Xiaohong Zhang ◽  
Wang Wang ◽  
Wei Ke ◽  
...  
Keyword(s):  
Performance Assessment ◽  
Success Rate ◽  
Ambiguity Resolution ◽  
Satellite System ◽  
Asia Pacific ◽  
Single Frequency ◽  
Navigation Satellite ◽  
Short Baseline ◽  
Positioning Accuracy ◽  
Single Epoch

AbstractThe BeiDou global navigation satellite system (BDS-3) constellation deployment has been completed on June 23, 2020, with a full constellation comprising 30 satellites. In this study, we present the performance assessment of single-epoch Real-Time Kinematic (RTK) positioning with tightly combined BeiDou regional navigation satellite system (BDS-2) and BDS-3. We first investigate whether code and phase Differential Inter-System Biases (DISBs) exist between the legacy B1I/B3I signals of BDS-3/BDS-2. It is discovered that the DISBs are in fact about zero for the baselines with the same or different receiver types at their endpoints. These results imply that BDS-3 and BDS-2 are fully interoperable and can be regarded as one constellation without additional DISBs when the legacy B1I/B3I signals are used for precise relative positioning. Then we preliminarily evaluate the single-epoch short baseline RTK performance of tightly combined BDS-2 and the newly completed BDS-3. The performance is evaluated through ambiguity resolution success rate, ambiguity dilution of precision, as well as positioning accuracy in kinematic and static modes using the datasets collected in Wuhan. Experimental results demonstrate that the current BDS-3 only solutions can deliver comparable ambiguity resolution performance and much better positioning accuracy with respect to BDS-2 only solutions. Moreover, the RTK performance is much improved with tightly combined BDS-3/BDS-2, particularly in challenging or harsh conditions. The single-frequency single-epoch tightly combined BDS-3/BDS-2 solution could deliver an ambiguity resolution success rate of 96.9% even with an elevation cut-off angle of 40°, indicating that the tightly combined BDS-3/BDS-2 could achieve superior RTK positioning performance in the Asia–Pacific region. Meanwhile, the three-dimensional (East/North/Up) positioning accuracy of BDS-3 only solution (0.52 cm/0.39 cm/2.14 cm) in the kinematic test is significantly better than that of the BDS-2 only solution (0.85 cm/1.02 cm/3.01 cm) due to the better geometry of the current BDS-3 constellation. The tightly combined BDS-3/BDS-2 solution can provide the positioning accuracy of 0.52 cm, 0.22 cm, and 1.80 cm, respectively.

scholarly journals Explicit parallel co-simulation approach: analysis and improved coupling method based on H-infinity synthesis

2021 ◽  
Author(s):  
Weitao Chen ◽  
Shenhai Ran ◽  
Canhui Wu ◽  
Bengt Jacobson
Keyword(s):  
Frequency Domain ◽  
Wide Frequency Range ◽  
Coupling Method ◽  
Sampled Data ◽  
H Infinity ◽  
First Case ◽  
Communication Step ◽  
Coupling Variables ◽  
The Stability ◽  
Stability And Accuracy

AbstractCo-simulation is widely used in the industry for the simulation of multidomain systems. Because the coupling variables cannot be communicated continuously, the co-simulation results can be unstable and inaccurate, especially when an explicit parallel approach is applied. To address this issue, new coupling methods to improve the stability and accuracy have been developed in recent years. However, the assessment of their performance is sometimes not straightforward or is even impossible owing to the case-dependent effect. The selection of the coupling method and its tuning cannot be performed before running the co-simulation, especially with a time-varying system.In this work, the co-simulation system is analyzed in the frequency domain as a sampled-data interconnection. Then a new coupling method based on the H-infinity synthesis is developed. The method intends to reconstruct the coupling variable by adding a compensator and smoother at the interface and to minimize the error from the sample-hold process. A convergence analysis in the frequency domain shows that the coupling error can be reduced in a wide frequency range, which implies good robustness. The new method is verified using two co-simulation cases. The first case is a dual mass–spring–damper system with random parameters and the second case is a co-simulation of a multibody dynamic (MBD) vehicle model and an electric power-assisted steering (EPAS) system model. Experimental results show that the method can improve the stability and accuracy, which enables a larger communication step to speed up the explicit parallel co-simulation.

scholarly journals Modeling and Analysis of BDS-2 and BDS-3 Combined Precise Time and Frequency Transfer Considering Stochastic Models of Inter-System Bias

2021 ◽  
Vol 13 (4) ◽  
pp. 793
Author(s):  
Guoqiang Jiao ◽  
Shuli Song ◽  
Qinming Chen ◽  
Chao Huang ◽  
Ke Su ◽  
...  
Keyword(s):  
Stochastic Models ◽  
Satellite System ◽  
Modeling And Analysis ◽  
System Bias ◽  
Frequency Transfer ◽  
Global Navigation ◽  
The Difference ◽  
The Stability ◽  
Global Navigation Satellite ◽  
Precise Time

BeiDou global navigation satellite system (BDS) began to provide positioning, navigation, and timing (PNT) services to global users officially on 31 July, 2020. BDS constellations consist of regional (BDS-2) and global navigation satellites (BDS-3). Due to the difference of modulations and characteristics for the BDS-2 and BDS-3 default civil service signals (B1I/B3I) and the increase of new signals (B1C/B2a) for BDS-3, a systemically bias exists in the receiver-end when receiving and processing BDS-2 and BDS-3 signals, which leads to the inter-system bias (ISB) between BDS-2 and BDS-3 on the receiver side. To fully utilize BDS, the BDS-2 and BDS-3 combined precise time and frequency transfer are investigated considering the effect of the ISB. Four kinds of ISB stochastic models are presented, which are ignoring ISB (ISBNO), estimating ISB as random constant (ISBCV), random walk process (ISBRW), and white noise process (ISBWN). The results demonstrate that the datum of receiver clock offsets can be unified and the ISB deduced datum confusion can be avoided by estimating the ISB. The ISBCV and ISBRW models are superior to ISBWN. For the BDS-2 and BDS-3 combined precise time and frequency transfer using ISBNO, ISBCV, ISBRW, and ISBWN, the stability of clock differences of old signals can be enhanced by 20.18%, 23.89%, 23.96%, and 11.46% over BDS-2-only, respectively. For new signals, the enhancements are −50.77%, 20.22%, 17.53%, and −3.69%, respectively. Moreover, ISBCV and ISBRW models have the better frequency transfer stability. Consequently, we recommended the optimal ISBCV or suboptimal ISBRW model for BDS-2 and BDS-3 combined precise time and frequency transfer when processing the old as well as the new signals.

scholarly journals A Digital Framework to Predict the Sunshine Requirements of Landscape Plants

2021 ◽  
Vol 11 (5) ◽  
pp. 2098
Author(s):  
Heyi Wei ◽  
Wenhua Jiang ◽  
Xuejun Liu ◽  
Bo Huang
Keyword(s):  
Solar Radiation ◽  
Plant Species ◽  
Large Scale ◽  
Normal Growth ◽  
Adaptive Selection ◽  
Landscape Plant ◽  
Landscape Plants ◽  
The Stability ◽  
Stability And Accuracy ◽  
The City

Knowledge of the sunshine requirements of landscape plants is important information for the adaptive selection and configuration of plants for urban greening, and is also a basic attribute of plant databases. In the existing studies, the light compensation point (LCP) and light saturation point (LSP) have been commonly used to indicate the shade tolerance for a specific plant; however, these values are difficult to adopt in practice because the landscape architect does not always know what range of solar radiation is the best for maintaining plant health, i.e., normal growth and reproduction. In this paper, to bridge the gap, we present a novel digital framework to predict the sunshine requirements of landscape plants. First, the research introduces the proposed framework, which is composed of a black-box model, solar radiation simulation, and a health standard system for plants. Then, the data fitting between solar radiation and plant growth response is used to obtain the value of solar radiation at different health levels. Finally, we adopt the LI-6400XT Portable Photosynthetic System (Li-Cor Inc., Lincoln, NE, USA) to verify the stability and accuracy of the digital framework through 15 landscape plant species of a residential area in the city of Wuhan, China, and also compared and analyzed the results of other researchers on the same plant species. The results show that the digital framework can robustly obtain the values of the healthy, sub-healthy, and unhealthy levels for the 15 landscape plant species. The purpose of this study is to provide an efficient forecasting tool for large-scale surveys of plant sunshine requirements. The proposed framework will be beneficial for the adaptive selection and configuration of urban plants and will facilitate the construction of landscape plant databases in future studies.

Sign in / Sign up

Export Citation Format

Share Document