Ca-Histochemistry in slime mold plasmodia

1978 ◽  
Vol 36 (2) ◽  
pp. 130-131
Author(s):  
Ulrich Dierkes
Keyword(s):  
Physarum Polycephalum ◽  
Carbon Coating ◽  
Freeze Drying ◽  
Freeze Fracture ◽  
Freeze Substitution ◽  
Uranyl Acetate ◽  
Slime Mold ◽  
Staining Procedure ◽  
Protoplasmic Streaming ◽  
Intracellular Ca

Calcium is supposed to play an important role in the control of protoplasmic streaming in slime mold plasmodia. The motive force for protoplasmic streaming is generated by the interaction of actin and myosin. This contraction is supposed to be controlled by intracellular Ca-fluxes similar to the triggering system in skeleton muscle. The histochemical localisation of calcium however is problematic because of the possible diffusion artifacts especially in aquous media.To evaluate this problem calcium localisation was studied in small pieces of shock frozen (liquid propane at -189°C) plasmodial strands of Physarum polycephalum, which were further processed with 3 different methods: 1) freeze substitution in ethanol at -75°C, staining in 100% ethanol with 1% uranyl acetate, and embedding in styrene-methacrylate. For comparison the staining procedure was omitted in some preparations. 2)Freeze drying at about -95°C, followed by immersion with 100% ethanol containing 1% uranyl acetate, and embedding. 3) Freeze fracture, carbon coating and SEM investigation at temperatures below -100° C.

scholarly journals Immunostaining of DNA in electron microscopy: an amplification and staining procedure for thin sections as alternative to gold labeling.

1994 ◽  
Vol 42 (5) ◽  
pp. 635-643 ◽  
Author(s):  
B Bohrmann ◽  
E Kellenberger
Keyword(s):  
Freeze Substitution ◽  
High Specificity ◽  
Staining Technique ◽  
Uranyl Acetate ◽  
Staining Procedure ◽  
Igg Antibody ◽  
Electron Microscopic ◽  
Thin Sections ◽  
Specificity And Sensitivity ◽  
Eukaryotic Chromatin

We describe a new electron microscopic on-section staining technique with high specificity and sensitivity for DNA-containing structures. Lowicryl HM20 sections of specimens obtained by cryofixation and freeze-substitution are incubated in a first step with a primary IgM antibody specific for double-stranded DNA. The layer of bound antibodies at the section surface is amplified in a successive step by a secondary IgG antibody. Finally, electron scattering of the antibody layer produced is enhanced by staining with a mixture of uranyl acetate and potassium permanganate. The applicability of the method is exemplified by the detection of shape and distribution of various types of bacterial and eukaryotic chromatin.

High-Resolution Scanning Electron Microscopy of Biological Specimens

1988 ◽  
Vol 46 ◽  
pp. 186-187
Author(s):  
M. Müller ◽  
R. Hermann
Keyword(s):  
High Resolution ◽  
Freeze Drying ◽  
Room Temperature ◽  
Structural Information ◽  
Freeze Substitution ◽  
Critical Point Drying ◽  
Sem Study ◽  
Major Factors ◽  
Structural Preservation ◽  
Preparation Techniques

Three major factors must be concomitantly assessed in order to extract relevant structural information from the surface of biological material at high resolution (2-3nm).Procedures based on chemical fixation and dehydration in graded solvent series seem inappropriate when aiming for TEM-like resolution. Cells inevitably shrink up to 30-70% of their initial volume during gehydration; important surface components e.g. glycoproteins may be lost. These problems may be circumvented by preparation techniques based on cryofixation. Freezedrying and freeze-substitution followed by critical point drying yields improved structural preservation in TEM. An appropriate preservation of dimensional integrity may be achieved by freeze-drying at - 85° C. The sample shrinks and may partially collapse as it is warmed to room temperature for subsequent SEM study. Observations at low temperatures are therefore a necessary prerequisite for high fidelity SEM. Compromises however have been unavoidable up until now. Aldehyde prefixation is frequently needed prior to freeze drying, rendering the sample resistant to treatment with distilled water.

Techniques for cryoultramicrotomy of propane jet frozen biological samples

1986 ◽  
Vol 44 ◽  
pp. 260-261
Author(s):  
B. Craig ◽  
L. Hawkey ◽  
A. LeFurgey
Keyword(s):  
Freeze Fracture ◽  
Freeze Substitution ◽  
Heart Cells ◽  
Crystal Formation ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Chick Heart ◽  
Embryonic Chick Heart ◽  
A New Technique

Ultra-rapid freezing followed by cryoultramicrotomy is essential for the preservation of diffusible elements in situ within cells prior to scanning transmission electron microscopy and quantitative energy dispersive x-ray microanalysis. For cells or tissue fragments in suspension and for monolayer cell cultures, propane jet freezing provides cooling rates greater than 30,000°C/sec with regions up to 40μm in thickness free of significant ice crystal formation. While this method of freezing has frequently been applied prior to freeze fracture or freeze substitution, it has not been widely utilized prior to cryoultramicrotomy and subsequent x-ray microanalytical studies. This report describes methods devised in our laboratory for cryosectioning of propane jet frozen kidney proximal tubule suspensions and cultured embryonic chick heart cells, in particular a new technique for mounting frozen suspension specimens for sectioning. The techniques utilize the same specimen supports and sample holders as those used for freeze fracture and freeze substitution and should be generally applicable to any cell suspension or culture preparation.

How to sample the entire length of a single muscle fiber quick-frozen after electrical point stimulation for high resolution EM

1992 ◽  
Vol 50 (1) ◽  
pp. 776-777
Author(s):  
Joachim R. Sommer ◽  
Teresa High ◽  
Betty Scherer ◽  
Isaiah Taylor ◽  
Rashid Nassar
Keyword(s):  
Skeletal Muscle ◽  
High Resolution ◽  
Action Potential ◽  
Muscle Fiber ◽  
Freeze Fracture ◽  
Freeze Substitution ◽  
Electrical Field Stimulation ◽  
Skeletal Muscle Fiber ◽  
Freeze Dried ◽  
Quick Freezing

We have developed a model that allows the quick-freezing at known time intervals following electrical field stimulation of a single, intact frog skeletal muscle fiber isolated by sharp dissection. The preparation is used for studying high resolution morphology by freeze-substitution and freeze-fracture and for electron probe x-ray microanlysis of sudden calcium displacement from intracellular stores in freeze-dried cryosections, all in the same fiber. We now show the feasibility and instrumentation of new methodology for stimulating a single, intact skeletal muscle fiber at a point resulting in the propagation of an action potential, followed by quick-freezing with sub-millisecond temporal resolution after electrical stimulation, followed by multiple sampling of the frozen muscle fiber for freeze-substitution, freeze-fracture (not shown) and cryosectionmg. This model, at once serving as its own control and obviating consideration of variances between different fibers, frogs etc., is useful to investigate structural and topochemical alterations occurring in the wake of an action potential.

Freeze-substituted fungal cells of Nectria haematococca: A comparison of the macroconidial walls of the adhesion-competent wild type with an adhesion-reduced mutant

1990 ◽  
Vol 48 (3) ◽  
pp. 688-689
Author(s):  
Thecan Caesar-Ton That ◽  
Lynn Epstein
Keyword(s):  
Freeze Substitution ◽  
Uranyl Acetate ◽  
Wild Type ◽  
Nectria Haematococca ◽  
Fruit Extract ◽  
Dialysis Tubing ◽  
Tube Emergence ◽  
Contrast Microscopy ◽  
In The Wild ◽  
Freeze Damage

Nectria haematococca mating population I (anamorph, Fusarium solani) macroconidia attach to its host (squash) and non-host surfaces prior to germ tube emergence. The macroconidia become adhesive after a brief period of protein synthesis. Recently, Hickman et al. (1989) isolated N. haematococca adhesion-reduced mutants. Using freeze substitution, we compared the development of the macroconidial wall in the wild type in comparison to one of the mutants, LEI.Macroconidia were harvested at 1C, washed by centrifugation, resuspended in a dilute zucchini fruit extract and incubated from 0 - 5 h. During the incubation period, wild type macroconidia attached to uncoated dialysis tubing. Mutant macroconidia did not attach and were collected on poly-L-lysine coated dialysis tubing just prior to freezing. Conidia on the tubing were frozen in liquid propane at 191 - 193C, substituted in acetone with 2% OsO4 and 0.05% uranyl acetate, washed with acetone, and flat-embedded in Epon-Araldite. Using phase contrast microscopy at 1000X, cells without freeze damage were selected, remounted, sectioned and post-stained sequentially with 1% Ba(MnO4)2 2% uranyl acetate and Reynold’s lead citrate. At least 30 cells/treatment were examined.

Freeze substitution fixation of fungal reproductive structures and spores

1989 ◽  
Vol 47 ◽  
pp. 990-991
Author(s):  
C. W. Mims ◽  
E. A. Richardson
Keyword(s):  
Plant Pathogens ◽  
Freeze Substitution ◽  
Uranyl Acetate ◽  
Chemical Fixation ◽  
Dialysis Membrane ◽  
Razor Blade ◽  
Thin Sections ◽  
Reproductive Structures ◽  
Dry Down ◽  
Diamond Knife

The advantages of freeze substitution fixation over conventional chemical fixation for preservation of ultrastructural details in fungi have been discussed by various authors. As most ascomycetes, basidiomycetes and deuteromycetes do not fix well using conventional chemical fixation protocols, freeze substitution has attracted the attention of many individuals interested in fungal ultrastructure. Thus far most workers using this technique on fungi have concentrated on thin walled somatic hyphae. However, in our laboratory we have experimented with the use of freeze substitution on a variety of fungal reproductive structures and spores with promising results.Here we present data on freeze substituted samples of sporangia of the zygomycete Umbellopsis vinacea, basidia of Exobasidium camelliae var. gracilis, developing teliospores of the smut Sporisorium sorghi, germinating teliospores of the rust Gymnosporangium clavipes, germinating conidia of the deuteromycete Cercosporidium personatum, and developing ascospores of Ascodesmis nigricans.Spores of G. clavipes and C. personatum were deposited on moist pieces of sterile dialysis membrane where they hydrated and germinated. Asci of A. nigricans developed on pieces of dialysis membrane lying on nutrient agar plates. U. vinacea was cultured on small pieces of agar-coated wire. In the plant pathogens E. camelliae var. gracilis and S. sorghi, a razor blade was used to remove smal1 pieces of infected host issue. All samples were plunged directly into liquid propane and processed for study according to Hoch.l Samples on dialysis membrane were flat embedded. Serial thin sections were cut using a diamond knife, collected on slot grids, and allowed to dry down onto Formvar coated aluminum racks. Sections were post stained with uranyl acetate and lead citrate.

The consolidation of microscopy technology into a university research support facility: Reflections on the 1980's and projections for the 1990's at the university of iowa

1993 ◽  
Vol 51 ◽  
pp. 476-477
Author(s):  
Kenneth C. Moore
Keyword(s):  
Laser Scanning ◽  
Freeze Fracture ◽  
Freeze Substitution ◽  
Research Support ◽  
University Of Iowa ◽  
Staff Members ◽  
The Past ◽  
Research Grade ◽  
The University ◽  
Support Facility

The University of Iowa Central Electron Microscopy Research Facility(CEMRF) was established in 1981 to support all faculty, staff and students needing this technology. Initially the CEMRF was operated with one TEM, one SEM, three staff members and supported about 30 projects a year. During the past twelve years, the facility has replaced all instrumentation pre-dating 1981, and now includes 2 TEM's, 2 SEM's, 2 EDS systems, cryo-transfer specimen holders for both TEM and SEM, 2 parafin microtomes, 4 ultamicrotomes including cryoultramicrotomy, a Laser Scanning Confocal microscope, a research grade light microscope, an Ion Mill, film and print processing equipment, a rapid cryo-freezer, freeze substitution apparatus, a freeze-fracture/etching system, vacuum evaporators, sputter coaters, a plasma asher, and is currently evaluating scanning probe microscopes for acquisition. The facility presently consists of 10 staff members and supports over 150 projects annually from 44 departments in 5 Colleges and 10 industrial laboratories. One of the unique strengths of the CEMRF is that both Biomedical and Physical scientists use the facility.

Sign in / Sign up

Export Citation Format

Share Document