An Operating Method with Lateral Scan for Reducing the Error in Topography Caused by the Tip-Sample Angle in Atomic Force Microscopy

2010 ◽  
Vol 16 (5) ◽  
pp. 630-635
Author(s):  
Fa-Quan Zhou ◽  
Xue-Zeng Zhao ◽  
Fei Wang ◽  
Yue-Yu Wang
Keyword(s):  
Atomic Force Microscopy ◽  
Topographic Image ◽  
Contact Mode ◽  
Atomic Force Microscopes ◽  
Force Microscopy ◽  
Atomic Force ◽  
Measurement Results ◽  
Parallel Scan ◽  
Operating Method

AbstractThe atomic force microscopes (AFM) images are obtained by keeping the bending of the cantilever unchanged in contact mode. However, it is found that changes in the tip-sample angle during parallel scan result in error in the topographic image. It is also discovered that measurement results obtained in the blind scan region contained large errors. In contrast, regions opposite the blind scan region gave more reliable result. To eliminate this topographic error caused by change in the tip-sample angle, a new operating method with lateral scan is utilized in AFM. Comparative experiments have been performed, and the results show that the error could be eliminated or decreased by using the operating method.

scholarly journals Dynamic friction energy dissipation and enhanced contrast in high frequency bimodal atomic force microscopy

Friction ◽  
2021 ◽  
Author(s):  
Xinfeng Tan ◽  
Dan Guo ◽  
Jianbin Luo
Keyword(s):  
Atomic Force Microscopy ◽  
Energy Dissipation ◽  
Contact Friction ◽  
Measuring Instruments ◽  
Dynamic Friction ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force ◽  
Friction Energy ◽  
New Applications

AbstractDynamic friction occurs not only between two contact objects sliding against each other, but also between two relative sliding surfaces several nanometres apart. Many emerging micro- and nano-mechanical systems that promise new applications in sensors or information technology may suffer or benefit from noncontact friction. Herein we demonstrate the distance-dependent friction energy dissipation between the tip and the heterogeneous polymers by the bimodal atomic force microscopy (AFM) method driving the second order flexural and the first order torsional vibration simultaneously. The pull-in problem caused by the attractive force is avoided, and the friction dissipation can be imaged near the surface. The friction dissipation coefficient concept is proposed and three different contact states are determined from phase and energy dissipation curves. Image contrast is enhanced in the intermediate setpoint region. The work offers an effective method for directly detecting the friction dissipation and high resolution images, which overcomes the disadvantages of existing methods such as contact mode AFM or other contact friction and wear measuring instruments.

scholarly journals Atomic force microscopy comparative analysis of the surface roughness of two posterior chamber phakic intraocular lens models: ICL versus IPCL

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Juan Gros-Otero ◽  
Samira Ketabi ◽  
Rafael Cañones-Zafra ◽  
Montserrat Garcia-Gonzalez ◽  
Cesar Villa-Collar ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Atomic Force Microscopy ◽  
Intraocular Lenses ◽  
Posterior Chamber ◽  
Anterior Surface ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force ◽  
Phakic Intraocular Lenses ◽  
Roughness Measurements

Abstract Background To compare the anterior surface roughness of two commercially available posterior chamber phakic intraocular lenses (IOLs) using atomic force microscopy (AFM). Methods Four phakic IOLs were used for this prospective, experimental study: two Visian ICL EVO+ V5 lenses and two iPCL 2.0 lenses. All of them were brand new, were not previously implanted in humans, were monofocal and had a dioptric power of − 12 diopters (D). The anterior surface roughness was assessed using a JPK NanoWizard II® atomic force microscope in contact mode immersed in liquid. Olympus OMCL-RC800PSA commercial silicon nitride cantilever tips were used. Anterior surface roughness measurements were made in 7 areas of 10 × 10 μm at 512 × 512 point resolution. The roughness was measured using the root-mean-square (RMS) value within the given regions. Results The mean of all anterior surface roughness measurements was 6.09 ± 1.33 nm (nm) in the Visian ICL EVO+ V5 and 3.49 ± 0.41 nm in the iPCL 2.0 (p = 0.001). Conclusion In the current study, we found a statistically significant smoother anterior surface in the iPCL 2.0 phakic intraocular lenses compared with the VISIAN ICL EVO+ V5 lenses when studied with atomic force microscopy.

Contact and non-contact mode imaging by atomic force microscopy

1996 ◽  
Vol 273 (1-2) ◽  
pp. 138-142 ◽  
Author(s):  
Seizo Morita ◽  
Satoru Fujisawa ◽  
Eigo Kishi ◽  
Masahiro Ohta ◽  
Hitoshi Ueyama ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force

Conducting Polymer nanoComposites (CPC): Nanocharacterisation of layer by layer sprayed PMMA-CNT vapour sensors by Atomic force Microscopy in current Sensing Mode (CS-AFM)

2008 ◽  
Vol 1143 ◽  
Author(s):  
Bijandra Kumar ◽  
Mickaël Castro ◽  
Jianbo Lu ◽  
Jean-François Feller
Keyword(s):  
Atomic Force Microscopy ◽  
Spray Deposition ◽  
Dynamic Mode ◽  
Layer By Layer ◽  
Initial State ◽  
Contact Mode ◽  
Current Sensing ◽  
Multi Wall Carbon Nanotubes ◽  
Force Microscopy ◽  
Atomic Force

ABSTRACTOrganic vapour sensors based on poly (methylmethacrylate)-multi-wall carbon nanotubes (PMMA-CNT) conductive polymer nanocomposite (CPC) were developed via layer by layer technique by spray deposition. CPC Sensors were exposed to three different classes of solvents (chloroform, methanol and water) and their chemo-electrical properties were followed as a function of CNTcontent in dynamic mode. Detection time was found to be shorter than that necessary for full recovery of initial state. CNT real three dimensional network has been visualized by Atomic force microscopy in a field assisted intermittent contact mode. More interestingly real conductive network system and electrical ability of CPC have been explored by current-sensing atomic force microscopy (CS-AFM). Realistic effect of voltage on electrical conductivity has been found linear.

scholarly journals Scanning speed phenomenon in contact-resonance atomic force microscopy

2018 ◽  
Vol 9 ◽  
pp. 945-952 ◽  
Author(s):  
Christopher C Glover ◽  
Jason P Killgore ◽  
Ryan C Tung
Keyword(s):  
Atomic Force Microscopy ◽  
Hydrodynamic Theory ◽  
Squeeze Film ◽  
Resonance Spectroscopy ◽  
Related Phenomenon ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force ◽  
Scan Speed ◽  
Contact Resonance

This work presents data confirming the existence of a scan speed related phenomenon in contact-mode atomic force microscopy (AFM). Specifically, contact-resonance spectroscopy is used to interrogate this phenomenon. Above a critical scan speed, a monotonic decrease in the recorded contact-resonance frequency is observed with increasing scan speed. Proper characterization and understanding of this phenomenon is necessary to conduct accurate quantitative imaging using contact-resonance AFM, and other contact-mode AFM techniques, at higher scan speeds. A squeeze film hydrodynamic theory is proposed to explain this phenomenon, and model predictions are compared against the experimental data.

scholarly journals Contact-Mode High-Resolution High-Speed Atomic Force Microscopy Movies of the Purple Membrane

2009 ◽  
Vol 97 (5) ◽  
pp. 1354-1361 ◽  
Author(s):  
Ignacio Casuso ◽  
Noriyuki Kodera ◽  
Christian Le Grimellec ◽  
Toshio Ando ◽  
Simon Scheuring
Keyword(s):  
Atomic Force Microscopy ◽  
High Resolution ◽  
High Speed ◽  
Purple Membrane ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force

scholarly journals Air–water interface of submerged superhydrophobic surfaces imaged by atomic force microscopy

2017 ◽  
Vol 8 ◽  
pp. 1671-1679 ◽  
Author(s):  
Markus Moosmann ◽  
Thomas Schimmel ◽  
Wilhelm Barthlott ◽  
Matthias Mail
Keyword(s):  
Atomic Force Microscopy ◽  
Current Knowledge ◽  
Biological Species ◽  
Optical Methods ◽  
Water Interface ◽  
Contact Mode ◽  
Structured Surfaces ◽  
Force Microscopy ◽  
Atomic Force ◽  
Air Water Interface

Underwater air retention of superhydrophobic hierarchically structured surfaces is of increasing interest for technical applications. Persistent air layers (the Salvinia effect) are known from biological species, for example, the floating fern Salvinia or the backswimmer Notonecta. The use of this concept opens up new possibilities for biomimetic technical applications in the fields of drag reduction, antifouling, anticorrosion and under water sensing. Current knowledge regarding the shape of the air–water interface is insufficient, although it plays a crucial role with regards to stability in terms of diffusion and dynamic conditions. Optical methods for imaging the interface have been limited to the micrometer regime. In this work, we utilized a nondynamic and nondestructive atomic force microscopy (AFM) method to image the interface of submerged superhydrophobic structures with nanometer resolution. Up to now, only the interfaces of nanobubbles (acting almost like solids) have been characterized by AFM at these dimensions. In this study, we show for the first time that it is possible to image the air–water interface of submerged hierarchically structured (micro-pillars) surfaces by AFM in contact mode. By scanning with zero resulting force applied, we were able to determine the shape of the interface and thereby the depth of the water penetrating into the underlying structures. This approach is complemented by a second method: the interface was scanned with different applied force loads and the height for zero force was determined by linear regression. These methods open new possibilities for the investigation of air-retaining surfaces, specifically in terms of measuring contact area and in comparing different coatings, and thus will lead to the development of new applications.

scholarly journals Wide range local resistance imaging on fragile materials by conducting probe atomic force microscopy in intermittent contact mode

2016 ◽  
Vol 108 (24) ◽  
pp. 243101 ◽  
Author(s):  
Aymeric Vecchiola ◽  
Pascal Chrétien ◽  
Sophie Delprat ◽  
Karim Bouzehouane ◽  
Olivier Schneegans ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Local Resistance ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force ◽  
Wide Range ◽  
Intermittent Contact
Sign in / Sign up

Export Citation Format

Share Document