scholarly journals Scanning Electron Microscopy and Spectroscopy Characterization of Cobalt Ferrite Nanoparticles by a Facile Hydrothermal Synthesis Method

2020 ◽  
Vol 26 (S2) ◽  
pp. 2806-2808
Author(s):  
Jessica Vinh ◽  
Xinlin Liu ◽  
Ruben Contreras ◽  
James Barnes ◽  
Andrea Goforth ◽  
...  
2012 ◽  
Vol 545 ◽  
pp. 169-171 ◽  
Author(s):  
Mawar Hazwani Jasimin ◽  
Nurhanna Badar ◽  
Rusdi Roshidah ◽  
Norlida Kamarulzaman

Aluminium oxide is one of the metal oxides that can exist in many phases such as α, θ, η etc. All the phases obtained are affected by annealing temperature and synthesis route. In this research the Al2O3 powders were synthesized by the combustion method using triethanolamine as fuels. A pure η phase as well as a mixed α and η phases were obtained. The size and morphology of Al2O3 particles were studied using scanning electron microscopy (SEM).


2012 ◽  
Vol 38 (5) ◽  
pp. 3625-3634 ◽  
Author(s):  
Yüksel Köseoğlu ◽  
Furkan Alan ◽  
Muhammed Tan ◽  
Resul Yilgin ◽  
Mustafa Öztürk

2010 ◽  
Vol 148-149 ◽  
pp. 903-906
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Xiao Feng Wang ◽  
Yu Jiang Wang ◽  
Gao Rong Han

PbTiO3 microrods were successfully synthesized via a surfactants-free hydrothermal method. The powders were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and photoluminescent spectra techniques (PL). It was found that the precursor played a key role in the formation of PbTiO3 microrods.


2018 ◽  
Vol 3 (1) ◽  
pp. 12 ◽  
Author(s):  
Zaimahwati Zaimahwati ◽  
Yuniati Yuniati ◽  
Ramzi Jalal ◽  
Syahman Zhafiri ◽  
Yuli Yetri

<p>Pada penelitian ini telah dilakukan isolasi dan karakterisasi bentonit alam menjadi nanopartikel montmorillonit. Bentonit alam yang digunakan diambil dari desa Blangdalam, Kecamatan Nisam Kabupaten Aceh Utara.  Proses isolasi meliputi proses pelarutan dengan aquades, ultrasonic dan proses sedimentasi. Untuk mengetahui karakterisasi montmorillonit dilakukan uji FT-IR, X-RD dan uji morfologi permukaan dengan Scanning Electron Microscopy (SEM). Partikel size analyzer untuk menganalisis dan menentukan ukuran nanopartikel dari isolasi bentonit alam. Dari hasil penelitian didapat ukuran nanopartikel montmorillonit hasil isolasi dari bentonit alam diperoleh berdiameter rata-rata 82,15 nm.</p><p><em>In this research we have isolated and characterized natural bentonite into montmorillonite nanoparticles. Natural bentonite used was taken from Blangdalam village, Nisam sub-district, North Aceh district. The isolation process includes dissolving process with aquades, ultrasonic and sedimentation processes.  The characterization of montmorillonite, FT-IR, X-RD and surface morphology test by Scanning Electron Microscopy (SEM). Particle size analyzer to analyze and determine the size of nanoparticles from natural bentonite insulation. From the research results obtained the size of montmorillonite nanoparticles isolated from natural bentonite obtained an average diameter of 82.15 nm.</em></p>


Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 446
Author(s):  
Ioannis Spanos ◽  
Zacharias Vangelatos ◽  
Costas Grigoropoulos ◽  
Maria Farsari

The need for control of the elastic properties of architected materials has been accentuated due to the advances in modelling and characterization. Among the plethora of unconventional mechanical responses, controlled anisotropy and auxeticity have been promulgated as a new avenue in bioengineering applications. This paper aims to delineate the mechanical performance of characteristic auxetic and anisotropic designs fabricated by multiphoton lithography. Through finite element analysis the distinct responses of representative topologies are conveyed. In addition, nanoindentation experiments observed in-situ through scanning electron microscopy enable the validation of the modeling and the observation of the anisotropic or auxetic phenomena. Our results herald how these categories of architected materials can be investigated at the microscale.


2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Liu Liu ◽  
Decai Gong ◽  
Zhengquan Yao ◽  
Liangjie Xu ◽  
Zhanyun Zhu ◽  
...  

Abstract Historically, sutras played an important role in spreading Buddhist faith and doctrine, and today these remain important records of Buddhist thought and culture. A Mahamayuri Vidyarajni Sutra with polychrome paintings was found inside the cavity on top of the Nanmen Buddhist pagoda, built in the early Tang dynasty (618–627 CE) and located in Anhui Province, China. Textile was found on the preface which is strongly degraded and fragile. Unfortunately, the whole sutra is under severe degradation and is incomplete. Technical analysis based on scientific methods will benefits the conservation of the sutra. Optical microscopy (OM), micro-Raman spectroscopy combined with optical microscope (Raman), scanning electron microscopy in combination with energy dispersive X-ray analysis (SEM–EDS) and Fourier Transform Infrared Spectroscopy (FTIR) were used to characterize the pigment and gilded material, as well as the paper fiber and textile. Pigments such as cinnabar, minium, paratacamite, azurite, lead white were found. Gilded material was identified as gold. A five-heddle warp satin, made of silk, was found as the textile on the preface of the sutra. The sutra’s preface and inner pages were made of paper comprised of bamboo and bark. As a magnificent yet recondite treasure of Buddhism, the sutra was analyzed for a better understanding of the material. A conservation project of the sutra will be scheduled accordingly.


Sign in / Sign up

Export Citation Format

Share Document