Convective Heat Transfer of the Flow through a Rotating Circular Straight Pipe

2001 ◽  
Vol 17 (2) ◽  
pp. 79-91
Author(s):  
U. Lei ◽  
Arthur C. Y. Yang
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Reynolds Numbers ◽  
Straight Pipe ◽  
Constant Wall Temperature ◽  
Fully Developed Flow ◽  
Flow Through ◽  
Prandtl Numbers ◽  
Scaling Analyses ◽  
Gradient Condition

ABSTRACTLaminar heat transfer for large ranges of Reynolds numbers, rotational Reynolds numbers, and Prandtl numbers are studied numerically for incompressible fully developed flow in a circular straight pipe, which is rotating constantly about an axis perpendicular to its own axis under the constant wall temperature gradient condition. There exist four types of local Nusselt number distributions associated with the four different flow regimes for different parameters depending on the relative importance of different forces. Correlations of the averaged Nusselt number are also provided. When the Prandtl number is sufficiently large, the temperature distribution in the core is determined essentially by the secondary flow. Scaling analyses are provided for understanding the essential physics of the problem.

Measurement and Analysis of Laminar Heat Transfer Coefficients in Micro and Mini-Scale Ducts and Channels

2014 ◽  
Author(s):  
Y. S. Muzychka ◽  
M. Ghobadi
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Reynolds Numbers ◽  
Transfer Coefficients ◽  
Constant Wall Temperature ◽  
Fully Developed Flow ◽  
Transfer Rates ◽  
Heat Transfer Coefficients ◽  
Advantages And Disadvantages ◽  
Nusselt Numbers

Heat transfer in micro and mini-scale ducts and channels is considered. In particular, issues of thermal performance are considered in systems with constant wall temperature at low to moderate Reynolds numbers or small dimensional scales which lead to conditions characteristic of thermally fully developed flows or within the transition region leading to thermally fully developed flows. An analysis of two approaches to representing experimental data is given. One using the traditional Nusselt number and another using the dimensionless mean wall flux. Both approaches offer a number of advantages and disadvantages. In particular, it is shown that while good data can be obtained which agree with predicted heat transfer rates, the same data can be problematic if one desires a Nusselt number. Other issues such as boundary conditions pertaining to measuring thermally developing and fully developed flow Nusselt numbers are also discussed in detail.

Numerical Analysis of Laminar Forced Convection in Sinusoidal-Wavy-, Rounded-Ellipse-, and Rounded-Vee-Shaped Corrugated-Plate Channels

2010 ◽  
Author(s):  
Dean Ferley ◽  
Scott J. Ormiston
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Numerical Analysis ◽  
Prandtl Number ◽  
Friction Factor ◽  
Forced Convection ◽  
Reynolds Numbers ◽  
Ansys Cfx ◽  
Prandtl Numbers ◽  
Laminar Forced Convection

Numerical analysis of steady, two-dimensional, laminar forced convection in corrugated-plate channels is performed using a commercial CFD code: ANSYS CFX. The flow domain consists of six modules in each of three wall corrugations: sinusoidal-wavy-shaped (SWS), rounded-ellipse-shaped (RES), and rounded-vee-shaped (RVS). One ratio of minimum-to-maximum plate spacings and one module length-to-height ratio is considered. Fluid flow and heat transfer are repeating in the modules and the results are examined in a typical module in the fully-developed region for Reynolds numbers in the range of 25 to 300 for Prandtl numbers of 0.7 (air), 2.29 (water), and 34.6 (ethylene glycol). The RES corrugation produced the highest peak value of local Nusselt number as well as the highest friction factor. The SWS corrugation produced the highest average Nusselt number, except at a Prandtl number of 34.6 at higher Reynolds number where the RES corrugation had the highest value. The RVS corrugation had the lowest friction factor for the geometric configuration considered. The highest heat transfer rate per unit pumping power was found at the highest Prandtl number for the RES corrugation.

Effect of Rotation and Surface Roughness on Heat Transfer Rate to Flow through Vertical Cylinders in Steam Condensation Process

2005 ◽  
Vol 128 (3) ◽  
pp. 318-323 ◽  
Author(s):  
Hany A. Mohamed
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Smooth Surface ◽  
Reynolds Numbers ◽  
Heat Transfer Surface ◽  
Condensation Process ◽  
Prandtl Numbers ◽  
Vertical Cylinders

The enhancement in the rate of the heat transfer resulting from rotating smooth and rough vertical cylinders, of 1.28 and 21.75μm average roughness, respectively, are experimentally studied. Experiments were carried out for cooling fluid Reynolds numbers from 3300 to 7800 with varying the rotational speed up to 280rpm. Experimental runs at the stationary case showed an acceptable agreement with the theoretical values. The experimental Nusselt number values at various rotational speeds are correlated as functions of Reynolds, Weber, and Prandtl numbers for smooth and rough surfaces. The correlated equations were compared with the correlation obtained by another author. The results show that the enhancement of the heat transfer rate becomes more appreciable for low Reynolds numbers at high rotational speeds and for high Reynolds numbers at low rotational speeds. The rotation causes an enhancement in the overall heat transfer coefficient of ∼89% at Re=7800, We=1084, and Pr=1.48 for smooth surface and of ∼13.7% at Re=4700, We=4891, and Pr=1.696 for rough surface. Also, the enhancement in the heat transfer rates utilizing rotary surface becomes more pronounced for the smooth surface compared with the rough one, therefore the choice of the heat transfer surface is very important. The present work shows a reduction in the heat transfer rate below its peak value depending on the type of the heat transfer surface. It is shown that the enhancement in the heat transfer, i.e., enhancement in the Nusselt number, depends on the Weber number value and the surface type while the Nusselt number value mainly depends on the Reynolds and Prandtl numbers. Correlated equation have been developed to represent the Nusselt number values as functions of the Weber and Reynolds numbers within the stated ranges of the parameters.

On the Influence of Gas Mixture Composition on Gas Quenching Uniformity and Mean

2005 ◽  
Author(s):  
O. Macchion ◽  
S. Zahrai ◽  
A. A˚stro¨m
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Axial Flow ◽  
Calculated Data ◽  
Heat Treating ◽  
Reynolds Numbers ◽  
Gas Mixture ◽  
Flow Parameters ◽  
Gas Quenching ◽  
Prandtl Numbers

The use of gas mixtures is widely spread in today’s industry. The fields of application go from cooling within refrigerators to the deep freezing of meat balls. One particular application is within the industry of gas heat treating of metal pieces. Such heat treatment involves the cooling of metal pieces, called quenching. The present work investigates the dependence of the performance of a given gas mixture on the geometry of the metal pieces to quench. The heat transfer coefficient and the convection Nusselt number across a short cylinder (D = 150 mm, L = 300 mm) in axial flow for mixtures of hydrogen and nitrogen were computed for six Reynolds numbers in the range 2.0 104 to 2.0 105. The Nusselt number decreased continually with increasing hydrogen content. Since the existing correlations did not adequately represent the calculated data, modified correlations were developed to describe the influence of transport properties and flow parameters on the convective heat transfer over the front and lateral surfaces of the cylinder. These correlations are valid for the range of Reynolds numbers 2.0 104 to 2.0 105 and in the range of Prandtl numbers 0.4 to 0.73. A relation giving the heat transfer uniformity as a function of the Reynolds number and Prandtl number of the gas mixture flowing around the cylinder in axial flow has been developed. This correlation is valid within the same range of Reynolds and Prandtl numbers previously given.

Heat transfer enhancement using second mode self-oscillating structures

2019 ◽  
Vol 30 (7) ◽  
pp. 3827-3842
Author(s):  
Samer Ali ◽  
Zein Alabidin Shami ◽  
Ali Badran ◽  
Charbel Habchi
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Laminar Flow ◽  
Flow Regime ◽  
Vortex Generator ◽  
Reynolds Numbers ◽  
Content Type ◽  
Laminar Flow Regime ◽  
Second Mode

Purpose In this paper, self-sustained second mode oscillations of flexible vortex generator (FVG) are produced to enhance the heat transfer in two-dimensional laminar flow regime. The purpose of this study is to determine the critical Reynolds number at which FVG becomes more efficient than rigid vortex generators (RVGs). Design/methodology/approach Ten cases were studied with different Reynolds numbers varying from 200 to 2,000. The Nusselt number and friction coefficients of the FVG cases are compared to those of RVG and empty channel at the same Reynolds numbers. Findings For Reynolds numbers higher than 800, the FVG oscillates in the second mode causing a significant increase in the velocity gradients generating unsteady coherent flow structures. The highest performance was obtained at the maximum Reynolds number for which the global Nusselt number is improved by 35.3 and 41.4 per cent with respect to empty channel and rigid configuration, respectively. Moreover, the thermal enhancement factor corresponding to FVG is 72 per cent higher than that of RVG. Practical implications The results obtained here can help in the design of novel multifunctional heat exchangers/reactors by using flexible tabs and inserts instead of rigid ones. Originality/value The originality of this paper is the use of second mode oscillations of FVG to enhance heat transfer in laminar flow regime.

An Experimental Study of Free Corrective Heat Transfer in a Parallelogrammic Enclosure

1983 ◽  
Vol 105 (3) ◽  
pp. 433-439 ◽  
Author(s):  
N. Seki ◽  
S. Fukusako ◽  
A. Yamaguchi
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Nusselt Number ◽  
Correlation Equation ◽  
Transformer Oil ◽  
Experimental Measurements ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Prandtl Numbers ◽  
Rayleigh Numbers

Experimental measurements are presented for free convective heat transfer across a parallelogrammic enclosure with the various tilt angles of parallel upper and lower walls insulated. The experiments covered a range of Rayleigh numbers between 3.4 × 104 and 8.6 × 107, and Prandtl numbers between 0.70 and 480. Those also covered the tilt angles of the parallel insulated walls with respect to the horizontal, φ, of 0, ±25, ±45, ±60, and ±70 deg under an aspect ratio of H/W = 1.44. The fluids used were air, transformer oil, and water. It was found that the heat transfer coefficients for φ = −70 deg were decreased to be about 1/18 times those for φ = 0 deg. Experimental results are given as plots of the Nusselt number versus the Rayleigh number. A correlation equation is given for the Nusselt number, Nu, as a function of φ, Pr, and Ra.

Investigating Gas Turbine Internal Cooling Using Supercritical CO2 at High Reynolds Numbers for Direct Fired Cycle Applications

2021 ◽  
Author(s):  
Matthew Searle ◽  
Arnab Roy ◽  
James Black ◽  
Doug Straub ◽  
Sridharan Ramesh
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Gas Turbines ◽  
Cfd Simulation ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Process Conditions ◽  
Internal Cooling ◽  
Air Breathing

Abstract In this paper, experimental and numerical investigations of three variants of internal cooling configurations — dimples only, ribs only and ribs with dimples have been explored at process conditions (96°C and 207bar) with sCO2 as the coolant. The designs were chosen based on a review of advanced internal cooling features typically used for air-breathing gas turbines. The experimental study described in this paper utilizes additively manufactured square channels with the cooling features over a range of Reynolds number from 80,000 to 250,000. Nusselt number is calculated in the experiments utilizing the Wilson Plot method and three heat transfer characteristics — augmentation in Nusselt number, friction factor and overall Thermal Performance Factor (TPF) are reported. To explore the effect of surface roughness introduced due to additive manufacturing, two baseline channel flow cases are considered — a conventional smooth tube and an additively manufactured square tube. A companion computational fluid dynamics (CFD) simulation is also performed for the corresponding cooling configurations reported in the experiments using the Reynolds Averaged Navier Stokes (RANS) based turbulence model. Both experimental and computational results show increasing Nusselt number augmentation as higher Reynolds numbers are approached, whereas prior work on internal cooling of air-breathing gas turbines predict a decay in the heat transfer enhancement as Reynolds number increases. Comparing cooling features, it is observed that the “ribs only” and “ribs with dimples” configurations exhibit higher Nusselt number augmentation at all Reynolds numbers compared to the “dimples only” and the “no features” configurations. However, the frictional losses are almost an order of magnitude higher in presence of ribs.

Investigating the effect of nanoparticles diameter on turbulent flow and heat transfer properties of non-Newtonian carboxymethyl cellulose/CuO fluid in a microtube

2019 ◽  
Vol 29 (5) ◽  
pp. 1699-1723 ◽  
Author(s):  
Ali Rahimi Gheynani ◽  
Omid Ali Akbari ◽  
Majid Zarringhalam ◽  
Gholamreza Ahmadi Sheikh Shabani ◽  
Abdulwahab A. Alnaqi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Average Nusselt Number ◽  
Electronic Devices ◽  
Convection Heat Transfer ◽  
Reynolds Numbers ◽  
Vlsi Circuits ◽  
Convection Heat Transfer Coefficient ◽  
Content Type ◽  
Competing Interests

Purpose Although many studies have been conducted on the nanofluid flow in microtubes, this paper, for the first time, aims to investigate the effects of nanoparticle diameter and concentration on the velocity and temperature fields of turbulent non-Newtonian Carboxymethylcellulose (CMC)/copper oxide (CuO) nanofluid in a three-dimensional microtube. Modeling has been done using low- and high-Reynolds turbulent models. CMC/CuO was modeled using power law non-Newtonian model. The authors obtained interesting results, which can be helpful for engineers and researchers that work on cooling of electronic devices such as LED, VLSI circuits and MEMS, as well as similar devices. Design/methodology/approach Present numerical simulation was performed with finite volume method. For obtaining higher accuracy in the numerical solving procedure, second-order upwind discretization and SIMPLEC algorithm were used. For all Reynolds numbers and volume fractions, a maximum residual of 10−6 is considered for saving computer memory usage and the time for the numerical solving procedure. Findings In constant Reynolds number and by decreasing the diameter of nanoparticles, the convection heat transfer coefficient increases. In Reynolds numbers of 2,500, 4,500 and 6,000, using nanoparticles with the diameter of 25 nm compared with 50 nm causes 0.34 per cent enhancement of convection heat transfer coefficient and Nusselt number. Also, in Reynolds number of 2,500, by increasing the concentration of nanoparticles with the diameter of 25 nm from 0.5 to 1 per cent, the average Nusselt number increases by almost 0.1 per cent. Similarly, In Reynolds numbers of 4,500 and 6,000, the average Nusselt number increases by 1.8 per cent. Research limitations/implications The numerical simulation was carried out for three nanoparticle diameters of 25, 50 and 100 nm with three Reynolds numbers of 2,500, 4,500 and 6,000. Constant heat flux is on the channel, and the inlet fluid becomes heated and exists from it. Practical implications The authors obtained interesting results, which can be helpful for engineers and researchers that work on cooling of electronic devices such as LED, VLSI circuits and MEMS, as well as similar devices. Originality/value This manuscript is an original work, has not been published and is not under consideration for publication elsewhere. About the competing interests, the authors declare that they have no competing interests.

scholarly journals MODELING HEAT EXCHANGE DEPENDING ON THE PRANDTL NUMBER FOR VARIOUS GEOMETRIC AND REGIME PARAMETERS

2020 ◽  
Vol 46 (4) ◽  
pp. 91-101
Author(s):  
I. E. Lobanov
Keyword(s):  
Heat Transfer ◽  
Shear Stress ◽  
Prandtl Number ◽  
Energy Equation ◽  
Transport Model ◽  
Reynolds Numbers ◽  
Structured Grids ◽  
Shear Stress Transport Model ◽  
Small Reynolds Numbers ◽  
Prandtl Numbers

Objectives. The aim is to study the dependency of the distribution of integral heat transfer during turbulent convective heat transfer in a pipe with a sequence of periodic protrusions of semicircular geometry on the Prandtl number using the calculation method based on a numerical solution of the system of Reynolds equations closed using the Menter’s shear stress transport model and the energy equation on different-sized intersecting structured grids.Method. A calculation was carried out on the basis of a theoretical method based on the solution of the Reynolds equations by factored finite-volume method closed with the help of the Menter shear stress transport model, as well as the energy equation on different-scaled intersecting structured grids (fast composite mesh method (FCOM)).Results. The calculations performed in the work showed that with an increase in the Prandtl number at small Reynolds numbers, there is an initial noticeable increase in the relative heat transfer. With additional increase in the Prandtl number, the relative heat transfer changes less: for small steps, it increases; for median steps it is almost stabilised, while for large steps it declines insignificantly. At large Reynolds numbers, the relative heat transfer decreases with an increase in the Prandtl number followed by its further stabilisation.Conclusion. The study analyses the calculated dependencies of the relative heat transfer on the Pr Prandtl number for various values of the relative h/D height of the turbulator, the relative t/D pitch between the turbulators and for various values of the Re Reynolds number. Qualitative and quantitative changes in calculated parameters are described all other things being equal. The analytical substantiation of the obtained calculation laws is that the height of the turbuliser is less for small Reynolds numbers, while for large Reynolds numbers, it is less than the height of the wall layer. Consequently, only the core of the flow is turbulised, which results in an increase in hydroresistance and a decrease in heat transfer. In the work on the basis of limited calculation material, a tangible decrease in the level of heat transfer intensification for small Prandtl numbers is theoretically confirmed. The obtained results of intensified heat transfer in the region of low Prandtl numbers substantiate the promising development of research in this direction. The theoretical data obtained in the work have determined the laws of relative heat transfer across a wide range of Prandtl numbers, including in those areas where experimental material does not currently exist. 

Numerical Simulation of Pressure Loss and Heat Transfer Characteristics for Additively Manufactured Channels

2020 ◽  
Author(s):  
Bryan Arko ◽  
Chad Iverson ◽  
Nicholas Staudigel
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Surface Roughness ◽  
Nusselt Number ◽  
Pressure Loss ◽  
Reynolds Numbers ◽  
Measured Data ◽  
Transfer Effects ◽  
Micro Channels ◽  
Heat Transfer Effects

Abstract This body of work provides an initial study of modeling both surface roughness and heat transfer concurrently in a numerical simulation of micro-channels representative of those that might be found in a turbine cooling application. Increased use of additive manufacturing (AM) or 3D printing techniques for turbomachinery components enable the manufacture of complex features to achieve higher operational performance. Accurate modeling of flow losses and heat transfer effects are critical to designing parts which achieve optimal efficiency paired with durability. Surface finish is rougher with AM compared to more traditional manufacturing techniques; therefore enhancing the pressure loss and heat transfer effects. Proper implementation of surface roughness within the computational model and correct modeling of the near wall boundary mesh must be maintained to produce accurate results. This study focuses on the comparison of near wall mesh treatment coupled with surface roughness to determine a practice for obtaining accurate pressure loss and heat transfer within a cooling passage, as compared to measurements. Steady-state computational fluid dynamics (CFD) models consisting of a wind tunnel inlet nozzle and outlet diffuser, along with internal cooling passages represented using micro-channels, has been run for a range of Reynolds numbers and simulated roughness levels. Analysis of a baseline configuration with aerodynamically smooth walls is first compared to the measured data to verify the assumption of aerodynamically smooth walls. Surface roughness is then added to the channel walls, from published test coupon measurements, and compared to published experimental data for a range of Reynolds numbers. The metal surrounding the passages is also included as a conjugate heat transfer model providing heat addition to the fluid. Pressure loss and heat transfer is compared to the measured data as a friction factor and Nusselt number for the range of Reynolds numbers. Since surface roughness units and measurements vary, an effect of surface roughness values on pressure loss and heat transfer will also be investigated to determine the importance of using and converting to the correct units for the numerical model. This serves as a starting point for a guideline that will help when both heat transfer and surface roughness are included in a CFD model. Further study is recommended to understand the diminishing levels of increase in friction factor and Nusselt number observed as surface roughness was continually increased in the numerical simulation.

Sign in / Sign up

Export Citation Format

Share Document