scholarly journals CPW-fed printed UWB antenna with open-loop inverted triangular-shaped slot for WLAN band filtering

2015 ◽  
Vol 8 (2) ◽  
pp. 257-262 ◽  
Author(s):  
Majid Shokri ◽  
Vahid Rafii ◽  
Saeid Karamzadeh ◽  
Zhaleh Amiri ◽  
Bal Virdee
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Open Loop ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Physical Parameters ◽  
Area Network ◽  
Band Frequency ◽  
Notch Band

A compact CPW-fed printed monopole slot antenna is presented for ultra-wideband (UWB) applications. The antenna comprises of a dome-shaped radiating element in which embedded is an open-loop inverted triangular-shaped slot (TSS). The antenna is fed through a coplanar waveguide to provide an ultra-wide impedance bandwidth of 8.95 GHz (2.58–11.53 GHz) which corresponds to a bandwidth ratio of 1:4.46 for VSWR <2. The antenna possesses a notch band functionality to filter out interfering C-band signals like wireless local-area network (WLAN). The notch band frequency is determined by physical parameters defining the TSS that allows fine control of the notch's location. The proposed antenna also possesses a flat gain response expect at the notched band and occupies a relatively small volume of 25 × 25 × 0.8 mm3 for ease of system integration.

Novel wideband slot antenna having notch-band function for 2.4 GHz WLAN and UWB applications

2011 ◽  
Vol 3 (4) ◽  
pp. 451-458 ◽  
Author(s):  
Arumugam Chellamuthu Shagar ◽  
Shaik Davood Wahidabanu
Keyword(s):  
Frequency Band ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Area Network ◽  
Rectangular Slot ◽  
Notch Band ◽  
Uwb Applications

In this paper, the design, simulation, and fabrication of a novel printed rectangular slot antenna with a band-notched function suitable for 2.4 GHz wireless local area network (WLAN) and ultra-wideband (UWB) applications is presented and investigated. Two pairs of slits are introduced into the ground plane to realize band-notched function, by tuning the position, length, and width of which a suitable rejected frequency band can be obtained. To improve the impedance matching, a rectangular cut is also made in the ground plane so that the antenna can cover 2–12 GHz frequency range. According to the measured results, the proposed antenna has a large bandwidth totally satisfying the requirement of 2.4 GHz WLAN and UWB systems, while providing the required band-notch function from 5.1 to 5.9 GHz. The study of transfer function and time-domain characteristics also indicates the band-notched function of the antenna. The radiation patterns display nearly omni-directional performance and the antenna gain is stable except in the rejected frequency band (5.1–5.9 GHz). Moreover, group delays are within 1.5 ns except for the notch band. These features make it a promising candidate for UWB wireless applications. Details of this antenna are described, and the experimental results of the constructed prototype are given.

An UWB dual polarized microstrip fed L-shape slot antenna

2015 ◽  
Vol 8 (2) ◽  
pp. 363-368 ◽  
Author(s):  
Raghupatruni Venkatsiva Ram Krishna ◽  
Raj Kumar ◽  
Nagendra Kushwaha
Keyword(s):  
Electric Fields ◽  
High Performance ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dual Polarized

In this paper, a microstrip fed, L-shape slot antenna for dual polarization is proposed. The two arms of the slot generate electric fields of orthogonal polarizations. By properly sectioning the slot and the feed line, ultra wideband (UWB) behavior is obtained. The measured impedance bandwidth (S11< −10 dB) is more than 8.6 GHz (112%) and 8.2 GHz (104%) for Port 1 and Port 2, respectively. The measured isolation is better than 25 dB over most of the band. The aperture field distribution justifies the dual polarized nature. A modified version which implements a band-notch over 5.1–5.85 GHz wireless local area network (WLAN) band is also presented. With a compact, single substrate design, the antenna can be useful in MIMO transmission systems, polarimetric UWB radar, high performance microwave imaging, and other future wireless communications devices.

Super wideband printed monopole antenna for ultra wideband applications

2015 ◽  
Vol 9 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Shrivastav Arun Kumar ◽  
M. Gulam Nabi Alsath ◽  
Sangeetha Velan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Wide Band ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size

This paper presents the design, testing, and analysis of a clover structured monopole antenna for super wideband applications. The proposed antenna has a wide impedance bandwidth (−10 dB bandwidth) from 1.9 GHz to frequency over 30 GHz. The clover shaped antenna with a compact size of 50 mm × 45 mm is designed and fabricated on an FR4 substrate with a thickness of 1.6 mm. Parametric study has been performed by varying the parameters of the clover to obtain an optimum wide band characteristics. Furthermore, the prototype introduces a method of achieving super wide bandwidth by deploying fusion of elliptical patch geometries (clover shaped) with a semi elliptical ground plane, loaded with a V-cut at the ground. The proposed antenna has a 14 dB bandwidth from 5.9 to 13.1 GHz, which is suitable for ultra wideband (UWB) outdoor propagation. The prototype is experimentally validated for frequencies within and greater than UWB. Transfer function, impulse response, and group delay has been plotted in order to address the time domain characteristics of the proposed antenna with fidelity factor values. The possible applications cover wireless local area network, C-band, Ku-band, K-band operations, Worldwide Interoperability for Microwave Access, and Wireless USB.

scholarly journals A Compact Semi-Circular and Arc-Shaped Slot Antenna for Heterogeneous RF Front-Ends

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1123 ◽  
Author(s):  
Zebiri ◽  
Sayad ◽  
Elfergani ◽  
Iqbal ◽  
Mshwat ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Personal Communication ◽  
Local Area ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Antenna Structure ◽  
High Frequency Structure Simulator

In this paper, a new miniaturized compact dual-band microstrip slot antenna is presented. To achieve the dual-band characteristics, two adjunct partial arc-shaped small slots are joined to two main circular slots embedded in the ground of the antenna structure. With a reduced size of 30 × 28.5 × 0.8 mm3, the proposed antenna presents a dual-band characteristic. The design is optimized using a High Frequency Structure Simulator (HFSS) followed by experimental verifications. An impedance bandwidth, for S11≤10 dB, that covers the 1.8 GHz and 2.4 GHz bands is accomplished, which makes the proposed antenna basically suitable for hand-held devices and medical applications. More applications such as digital communication system (DCS) 1.71–1.88 GHz, personal communication services (PCS) 1.85–1.99 GHz, Universal and mobile telecommunications system UMTS 1.92–2.17 GHz, Bluetooth 2.4–2.5 GHz, and Wi-Fi 2.4–2.454 GHz, Industrial Scientific and Medical radio frequency (RF) band ISM-2.4 GHz, Wireless Local Area Network (WLAN-2.4)are possible by simply changing one of the geometrical antenna dimensions. The antenna is characterized by stable radiation patterns as well.

A compact uniplanar EBG structure and its application in band-notched UWB filter

2013 ◽  
Vol 5 (4) ◽  
pp. 491-498 ◽  
Author(s):  
Lalithendra Kurra ◽  
Mahesh P Abegaonkar ◽  
Ananjan Basu ◽  
Shiban K Koul
Keyword(s):  
Satellite Communication ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Ultra Wideband ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
One Dimensional ◽  
Notch Band ◽  
Narrow Bandgap

In this paper, a new way of obtaining a band rejection in a ultra wideband (UWB) filter using a uniplanar Electromagnetic bandgap (EBG) structure is reported. The EBG structure has a bandgap centered at 6.69 GHz which is almost 38% lower compared with the conventional uniplanar EBG of same dimensions. A one-dimensional EBG structure coupled with a microstrip line provides a narrow bandgap, which is used in obtaining a notch in the UWB filter. Single notch UWB filters with variations in the placement of EBG are fabricated producing a notch centered at 5.19 GHz (wireless local area network (WLAN)). A dual notch (5.16 and 8.24 GHz (satellite communication)) UWB filter is also fabricated with two different unit cell EBGs'. Switchable and tunable notch band UWB filters are proposed.

Super wideband antenna with single band suppression

2015 ◽  
Vol 9 (1) ◽  
pp. 143-150 ◽  
Author(s):  
Murli Manohar ◽  
Rakhesh Singh Kshetrimayum ◽  
Anup Kumar Gogoi
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Antenna Structure ◽  
Ieee 802.11A ◽  
Feed Region

In this paper, a band-notched compact printed monopole super wideband (SWB) antenna has been designed and fabricated. The SWB antenna composed of a radiating patch with a 50 Ω triangular tapered feed line which is connected through a feed region, and a chamfered ground plane (CGP), that covers the frequency band from 0.9–100 GHz (ratio bandwidth of 111.1:1) with a reflection coefficient |S11| < −10 dB, except in the notched band of 4.7–6 GHz for Wireless local area network IEEE 802.11a and HIPERLAN/2 WLAN band. To realize the band notch characteristics a C-shape parasitic element is employed near the CGP etched with two symmetrical L-slots and placed under the radiating patch. Proposed antenna structure occupies a relatively small space (30 × 40 × 0.787 mm3) and achieved much wider impedance bandwidth as well as higher gain compared with the existing ultra wideband and SWB antennas.

Planar suspended line technique based UWB-MIMO antenna having dual-band notching characteristics

2020 ◽  
pp. 1-10
Author(s):  
Kirti Vyas ◽  
Rajendra Prasad Yadav
Keyword(s):  
Satellite Communication ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Electrical Performance ◽  
Impedance Bandwidth ◽  
Area Network

Abstract This communication reports significant isolation improvement utilizing planar suspended line (PSL) technique in ultra wideband (UWB) antenna for Multiple Input Multiple Output (MIMO) application. The antenna exhibits dual-band notched characteristic in Wireless Local Area Network (WLAN) band covering 5.45–5.85 GHz range; and in 7.15–7.95 GHz range for X-band downlink operations in satellite communication. Band-notching characteristics have been obtained by employing a single Elliptical Split Ring Resonator (ESSR) placed adjacent to each microstrip feed line of the radiating element and duo of “Y”-shaped strips employed within the circular ring of individual radiating elements. Two elements antenna occupy a compact space of 20 × 36 × 1.6 mm3 exhibiting huge measured impedance bandwidth (S11/S22 < −10 dB) covering 3.1–11.5 GHz and significant isolation of >21 dB in the almost entire band of operation. The electrical performance of antennas has been analyzed in terms of various MIMO parameters. Measured results demonstrate good accord with simulated results proving the competency of proposed antenna in high-density package systems and massive MIMO applications.

A compact band-notched antenna with high isolation for UWB MIMO applications

2020 ◽  
pp. 1-7
Author(s):  
Issmat Shah Masoodi ◽  
Insha Ishteyaq ◽  
Khalid Muzaffar ◽  
M. Idrees Magray
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Antenna System ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Antenna Module

Abstract A compact antenna module with a single band notch at wireless local area network (WLAN) (5.725–5.825 GHz) for ultra-wideband (UWB) multiple input multiple output (MIMO) applications is proposed. Proposed antenna which acquires size of 0.299 λ × 0.413 λ × 0.005 λ mm3 at 3.1 GHz consists of two symmetrical radiators placed side by side on global merchandise link (GML) 1000 substrate (εr = 3.2, tan δ = 0.004). Isolation between the antenna elements is >18 dB in the whole UWB band, which is achieved by introducing the vertical stub and H-slot between the monopole radiators in the ground plane. The simulated and measured results of the antenna system are in good agreement. The proposed antenna covers entire UWB with impedance bandwidth (|S11| < −15 dB) from 3.1 to 11 GHz except at WLAN notched band. The designed antenna module bears low envelope correlation coefficient and minimal multiplexing efficiency hence fulfilling criteria suitable for various wireless MIMO applications.

Design of a Compact Dual Band-Notched Ultra-Wideband Diversity Antenna for MIMO Applications

2014 ◽  
Vol 711 ◽  
pp. 316-319
Author(s):  
Bao Jun Song ◽  
Hui Zhao ◽  
Tong Xu ◽  
Qin Zhang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Ring Resonators ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Multiple Input ◽  
Diversity Antenna

A compact dual band-notched ultra-wideband (UWB) diversity antenna for multiple-input-multiple-output (MIMO) application is presented in this letter. The antenna consists of two tapered microstrip feeding lines and two semi-circle patches as the radiators. The C-band and wireless local area network (WLAN) for IEEE 802.11a band-notched function is achieved by etching four split-ring resonators (SRR) in the patches. The simulated and measured results show that the proposed antenna has a broadband impedance bandwidth covering the UWB band with definition of |S11|<-10dB and a dual band-notched function at C-band and WLAN band. As a multiple-input antenna, a good isolation |S21| between two ports better than -15 dB across the UWB is also achieved. The radiation patterns, peak gain, and envelope correlation coefficient are also measured and discussed.

scholarly journals A Coplanar Waveguide Fed UWB Antenna using Embedded E-shaped Structure with WLAN Band-rejection

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 325-332 ◽  
Author(s):  
Han Xu ◽  
Kai-Da Xu ◽  
Wei Nie ◽  
Yan-Hui Liu
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Ultra Wideband ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Uwb Antenna ◽  
System A

Abstract A compact coplanar waveguide (CPW)-fed ultra-wideband (UWB) monopole antenna using embedded E-shaped structure with wireless local area network (WLAN) band-rejection is presented. The introduction of this E-shaped structure working as the radiator can enhance the impedance bandwidth of the UWB antenna without increasing the overall size. For preventing the interference from WLAN system, a pair of L-shaped stubs are connected to the ground of UWB antenna to create the rejected band. The center frequency of this rejected band is about 5.5 GHz with the rejection range of 5.2~5.8 GHz. Good agreement can be observed between the simulated and measured results.

Sign in / Sign up

Export Citation Format

Share Document