An axially slotted cylinder with specific inhomogeneous coatings

2017 ◽  
Vol 9 (10) ◽  
pp. 1915-1924
Author(s):  
Z.A. Awan

An axially slotted cylinder coated with two different types of inhomogeneous coating layers is considered. These inhomogeneous coatings have decreasing permittivity profiles. The effects of various parameters of these coatings upon the gain pattern have been investigated using numerical simulations. It is studied that the gain at certain observation angles can be enhanced or diminished by controlling the inhomogeneity parameters of these considered profiles. It is further studied that for specific type of considered inhomogeneous coatings, the forward direction gain can be enhanced significantly.

2015 ◽  
Vol 8 (7) ◽  
pp. 1061-1068 ◽  
Author(s):  
Zeeshan Akbar Awan

The gain properties of an axially slotted cylinder coated with two lossless layers and embedded in a certain lossless background medium have been investigated analytically. The effects of different types of coating layers, i.e. dielectric, magnetic, and Single Negative materials upon the gain characteristics of an axial slot have been discussed. It is observed that if inner layer is either of dielectric or magnetic type and outer layer is an Epsilon Negative type having its relative permittivity of negative one and slotted cylinder is embedded in the free space then the gain has directive pattern. It is also studied that if both layers are dielectric or magnetic types and embedded in a Mu Negative medium then its gain pattern becomes more directive with the maximum gain in the forward direction.


1994 ◽  
Vol 264 ◽  
pp. 81-106 ◽  
Author(s):  
J. Verron ◽  
S. Valcke

The influence of stratification on the merging of like-sign vortices of equal intensity and shape is investigated by numerical simulations in a quasi-geostrophic, two-layer stratified model. Two different types of vortices are considered: vortices defined as circular patches of uniform potential vorticity in the upper layer but no PV anomaly in the lower layer (referred to as PVI vortices), and vortices defined as circular patches of uniform relative vorticity in the upper layer but no motion in the lower layer (referred to as RVI vortices). In particular, it is found that, in the RVI case, the merging behaviour depends strongly on the magnitude of the stratification (i.e. the ratio of internal Rossby radius and vortex radius). The critical point here appears to be whether or not the initial eddies have a deep flow signature in terms of PV.The specific phenomenon of scale-dependent merging observed is interpreted in terms of the competitive effects of hetonic interaction and vortex shape. In the case of weaker stratification, the baroclinic structure of the eddies can be seen as dominated by a mechanism of hetonic interaction in which bottom flow appears to counteract the tendency of surface eddies to merge. In the case of larger stratification, the eddy interaction mechanism is shown to be barotropically dominated, although interface deformation still determines the actual eddy vorticity profile during the initialization stage. Repulsion (hetonic) effect therefore oppose attraction (barotropic shape) effects in a competitive process dependent on the relationship between the original eddy lengthscale and the first internal Rossby radius.A concluding discussion considers the implications of such analysis for real situations, in the ocean or in the laboratory.


Author(s):  
Z. C. Feng ◽  
Mahmoud Almasri

Designs of many micro devices take advantage of the symmetry for better performance, immunity to noise, and for simpler analysis. When a symmetric structure is subjected to symmetric forcing, the symmetric response can become unstable leading to asymmetric responses. The occurrence of symmetry breaking bifurcation leads to complicated dynamic responses which often result in less desirable performances. In this paper, we obtain analytical criteria for the onset of symmetry breaking bifurcations. We also conduct numerical simulations to demonstrate different types of asymmetric dynamic responses resulting from the symmetry breaking bifurcation. In particular, we show the occurrence of amplitude modulated motions in such systems.


2021 ◽  
Author(s):  
Hai Zhou ◽  
Haiping Wu ◽  
Jian Xu ◽  
Hongbin Fang

Abstract Origami-inspired structures and materials have shown remarkable properties and performances originating from the intricate geometries of folding. Origami folding could be a dynamic process and origami structures could possess rich dynamic characteristics under external excitations. However, the current state of dynamics of origami has mostly focused on the dynamics of a single cell. This research has performed numerical simulations on multi-stable dual-cell series Miura-Ori structures with different types of inter-cell connections based on a dynamic model that does not neglect in-plane mass. We introduce a concept of equivalent constraint stiffness k* to distinguish different types of inter-cell connections. Results of numerical simulations reveal the multi-stable dual-cell structure will exhibit a variety of complex nonlinear dynamic responses with the increasing of connection stiffness because of the deeper energy well it has. The connection stiffness has a strong effect on the steady-state dynamic responses under different excitation amplitudes and a variety of initial conditions. This effect makes us able to adjust the dynamic behaviors of dual-cell series Miura-Ori structure to our needs in a complex environment. Furthermore, the results of this research could provide us a theoretical basis for the dynamics of origami folding and serve as guidelines for designing dynamic applications of origami metastructures and metamaterials.


Designs ◽  
2020 ◽  
Vol 4 (3) ◽  
pp. 34
Author(s):  
Pedro F. Gois ◽  
Ângelo J. Costa e Silva ◽  
João M. P. Q. Delgado ◽  
António C. Azevedo ◽  
Ana S. Guimarães ◽  
...  

This work presents an extensive numerical simulation to analyze the influence of the coating layers on the performance of construction systems, in order to make the constructions projects feasible, not only economically but also technically. Through numerical simulations based on a defined reference model, the present work studied the influence of different layers of floor, roof and internal and external wall systems, on the acoustic, thermal, and luminous performance of buildings in Brazil. The results showed the materials and elements with the greatest influence on: lighting performance are the internal finishes of the environment and the type of glass used in the external windows. On thermal performance, all elements of the roofing system and façades, especially an absence of external cladding and the use of thermal blankets on the roof, have greater influence. The acoustic performance of the façade function on the external windows and acoustic performance of the floor system are mainly influenced by the thickness of the structural element and the use of a ceiling and acoustic blanket; acoustic performance of internal walls is affected by typology of the structured element of the wall and thickness.


2018 ◽  
Vol 148 ◽  
pp. 16003 ◽  
Author(s):  
Piotr Wolszczak ◽  
Grzegorz Litak ◽  
Marek Dziuba

The article presents the results of design and monitoring the drilling process. Vibroacoustic sensors were used to observe spindle vibrations. These signals were subjected to a Huang decomposition and a Fourier transform. Results for various conditions were studied and classified with help of Fourier spectra and the envelope curves. Using the additional results of numerical simulations sources of vibration were identified. We considered four different types of drilling which were diversified in terms of geometrical parameters of blades. The application of Hilbert transform enable to find nonlinear characteristics via the deflection profile of resonance backbone curves.


Author(s):  
Sarbendu Rakshit ◽  
Bidesh K. Bera ◽  
Jürgen Kurths ◽  
Dibakar Ghosh

Most of the previous studies on synchrony in multiplex networks have been investigated using different types of intralayer network architectures which are either static or temporal. Effect of a temporal layer on intralayer synchrony in a multilayered network still remains elusive. In this paper, we discuss intralayer synchrony in a multiplex network consisting of static and temporal layers and how a temporal layer influences other static layers to enhance synchrony simultaneously. We analytically derive local stability conditions for intralayer synchrony based on the master stability function approach. The analytically derived results are illustrated by numerical simulations on up to five-layers multiplex networks with the paradigmatic Lorenz system as the node dynamics in each individual layer.


Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6702
Author(s):  
Regina Lamedica ◽  
Alessandro Ruvio ◽  
Manuel Tobia ◽  
Guido Guidi Buffarini ◽  
Nicola Carones

The paper presents a preliminary technical-economic comparison between a 3 kV DC railway and the use of trains with on-board storage systems. Numerical simulations have been carried out on a real railway line, which presents an electrified section at 3 kV DC and a non-electrified section, currently covered by diesel-powered trains. Different types of ESS have been analyzed, implementing the models in Matlab/Simulink environment. A preparatory economic investigation has been carried out.


1997 ◽  
Vol 119 (4) ◽  
pp. 603-608 ◽  
Author(s):  
Y. C. Qu ◽  
L. Cheng ◽  
D. Rancourt

This paper presents an experimental assessment of the Tip Excitation Technique (TET) introduced in a companion paper. The aim of the technique is to measure the rotational compliance of attached plane structures. Following the guidelines established on the basis of a numerical study in the companion paper, experimental measurements were performed on a rectangular plate and results were compared with numerical simulations. The investigation focuses on the general performance of the technique, on the different types of excitation used and on other factors necessary to ensure accurate results. In addition, an error analysis is conducted to demonstrate the sensitivity of the results to biased measurement quantities. It is concluded that the proposed technique can be used in the low to middle frequency range, where relatively strong modal behavior is involved.


2012 ◽  
Vol 706 ◽  
pp. 150-172 ◽  
Author(s):  
P. A. Davidson ◽  
N. Okamoto ◽  
Y. Kaneda

AbstractWe consider freely decaying, anisotropic, statistically axisymmetric, Saffman turbulence in which $E(k\ensuremath{\rightarrow} 0)\ensuremath{\sim} {k}^{2} $, where $E$ is the energy spectrum and $k$ the wavenumber. We note that such turbulence possesses two statistical invariants which are related to the form of the spectral tensor ${\Phi }_{ij} (\mathbi{k})$ at small $k$. These are ${M}_{\parallel } = {\Phi }_{\parallel } ({k}_{\parallel } = 0, {k}_{\perp } \ensuremath{\rightarrow} 0)$ and ${M}_{\perp } = 2{\Phi }_{\perp } ({k}_{\parallel } = 0, {k}_{\perp } \ensuremath{\rightarrow} 0)$, where the subscripts $\parallel $ and $\perp $ indicate quantities parallel and perpendicular to the axis of symmetry. Since ${M}_{\parallel } \ensuremath{\sim} { u}_{\parallel }^{2} { \ell }_{\perp }^{2} {\ell }_{\parallel } $ and ${M}_{\perp } \ensuremath{\sim} { u}_{\perp }^{2} { \ell }_{\perp }^{2} {\ell }_{\parallel } $, $u$ and $\ell $ being integral scales, self-similarity of the large scales (when it applies) demands ${ u}_{\parallel }^{2} { \ell }_{\perp }^{2} {\ell }_{\parallel } = \text{constant} $ and ${ u}_{\perp }^{2} { \ell }_{\perp }^{2} {\ell }_{\parallel } = \text{constant} $. This, in turn, requires that ${ u}_{\parallel }^{2} / { u}_{\perp }^{2} $ is constant, contrary to the popular belief that freely decaying turbulence should exhibit a ‘return to isotropy’. Numerical simulations performed in large periodic domains, with different types and levels of initial anisotropy, confirm that ${M}_{\parallel } $ and ${M}_{\perp } $ are indeed invariants and that, in the fully developed state, ${ u}_{\parallel }^{2} / { u}_{\perp }^{2} = \text{constant} $. Somewhat surprisingly, the same simulations also show that ${\ell }_{\parallel } / {\ell }_{\perp } $ is more or less constant in the fully developed state. Simple theoretical arguments are given which suggest that, when ${ u}_{\parallel }^{2} / { u}_{\perp }^{2} $ and ${\ell }_{\parallel } / {\ell }_{\perp } $ are both constant, the integral scales should evolve as ${ u}_{\perp }^{2} \ensuremath{\sim} { u}_{\parallel }^{2} \ensuremath{\sim} {t}^{\ensuremath{-} 6/ 5} $ and ${\ell }_{\perp } \ensuremath{\sim} {\ell }_{\parallel } \ensuremath{\sim} {t}^{2/ 5} $, irrespective of the level of anisotropy and of the presence of helicity. These decay laws, first proposed by Saffman (Phys. Fluids, vol. 10, 1967, p. 1349), are verified by the numerical simulations.


Sign in / Sign up

Export Citation Format

Share Document