Low profile dual band-stop super wideband printed monopole antenna with polarization diversity

2019 ◽  
Vol 11 (7) ◽  
pp. 694-702
Author(s):  
Murli Manohar ◽  
Rakhesh Singh Kshetrimayum ◽  
Anup Kumar Gogoi
Keyword(s):  
Local Area Network ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Polarization Diversity ◽  
Low Profile ◽  
Compact Size ◽  
Printed Monopole Antenna ◽  
Printed Monopole

AbstractA low profile super-wideband polarization diversity printed monopole antenna with dual band-notched characteristics is presented the first time. The designed antenna comprises two arched shaped radiating elements with two triangular tapered microstrip feed lines (TTMFL) and two arched shaped partial ground planes, which covers an enormously wide impedance bandwidth (BW) from 1.2 to 25 GHz (ratio BW of 20.8:3) for reflection coefficient |S11| < −10 dB. To ensure the high port isolation (better than − 30 dB) between two feeding ports over the whole bands, two analogous antennas have been kept perpendicular to each other at a distance of 1 mm. In addition, the dual band-notched performance in wireless local area network (5–6 GHz) and X-band (7.2–8.5 GHz) is generated by employing a pair of open-circuited stubs (L-shaped stub and horizontal stub) to the TTMFL. Envelop correlation coefficient has been computed to study the polarization diversity performance. Finally, the proposed antenna was fabricated and tested successfully. Measured results indicate that the proposed antenna is an appropriate candidate for the polarization diversity applications. The proposed antenna has a compact size of 40 × 70 × 0.787 mm3, high isolation, and occupies a small space compared with the existing antennas.

Novel dual-band multistrip monopole antenna with defected ground structure for WLAN/IMT/BLUETOOTH/WIMAX applications

2013 ◽  
Vol 6 (1) ◽  
pp. 93-100 ◽  
Author(s):  
Jaswinder Kaur ◽  
Rajesh Khanna ◽  
Machavaram Kartikeyan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Design Procedure ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Simulation Results

In the present work, a novel multistrip monopole antenna fed by a cross-shaped stripline comprising one vertical and two horizontal strips has been proposed for wireless local area network (WLAN)/Industrial, Scientific, and Medical band (ISM)/International Mobile Telecommunication (IMT)/BLUETOOTH/Worldwide Interoperability for Microwave Access (WiMAX) applications. The designed antenna has a small overall size of 20 × 30 mm2. The goal of this paper is to use defected ground structure (DGS) in the proposed antenna design to achieve dual-band operation with appreciable impedance bandwidth at the two operating modes satisfying several communication standards simultaneously. The antenna was simulated using Computer Simulation Technology Microwave Studio (CST MWS) V9 based on the finite integration technique (FIT) with perfect boundary approximation. Finally, the proposed antenna was fabricated and some performance parameters were measured to validate against simulation results. The design procedure, parametric analysis, simulation results along with measurements for this multistrip monopole antenna using DGS operating simultaneously at WLAN (2.4/5.8 GHz), IMT (2.35 GHz), BLUETOOTH (2.45 GHz), and WiMAX (5.5 GHz) are presented.

scholarly journals Low profile Compact Printed Monopole Antenna for Satellite based AIS Application

2020 ◽  
Vol 70 (2) ◽  
pp. 175-182
Author(s):  
Prithish Chand ◽  
Amar Dattatray Chaudhari ◽  
Rahul Keley ◽  
Kamala Prasan Ray
Keyword(s):  
Ground Plane ◽  
Coaxial Line ◽  
Monopole Antenna ◽  
Size Reduction ◽  
Automatic Identification ◽  
Identification System ◽  
Low Profile ◽  
Compact Size ◽  
Printed Monopole Antenna ◽  
Printed Monopole

In this paper, a simple, low profile compact printed monopole antenna has been proposed for satellite based automatic identification system (SB-AIS). The design consists of a printed monopole, which has been meandered to achieve optimum size reduction. The detailed investigation in terms of bending of the arms of monopole, width of the patch and dimensions of the ground plane on the resonance frequency and input impedance is presented. The antenna is matched to a typical 50 Ω coaxial line without any requirement of external matching structures. The prototype of the antenna is fabricated and tested at an operating frequency of 161 MHz for SB-AIS, with compact size of 44.5 . 17 cm2. The measured results show that the antenna has a bandwidth of 15 MHz (9.3 per cent), gain of 1.87 dBi and beam-width of 82° in the elevation and omnidirectional in azimuthal plane. The size reduction is 53.8 per cent as compared to a linear printed monopole antenna.

Super wideband printed monopole antenna for ultra wideband applications

2015 ◽  
Vol 9 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Shrivastav Arun Kumar ◽  
M. Gulam Nabi Alsath ◽  
Sangeetha Velan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Wide Band ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size

This paper presents the design, testing, and analysis of a clover structured monopole antenna for super wideband applications. The proposed antenna has a wide impedance bandwidth (−10 dB bandwidth) from 1.9 GHz to frequency over 30 GHz. The clover shaped antenna with a compact size of 50 mm × 45 mm is designed and fabricated on an FR4 substrate with a thickness of 1.6 mm. Parametric study has been performed by varying the parameters of the clover to obtain an optimum wide band characteristics. Furthermore, the prototype introduces a method of achieving super wide bandwidth by deploying fusion of elliptical patch geometries (clover shaped) with a semi elliptical ground plane, loaded with a V-cut at the ground. The proposed antenna has a 14 dB bandwidth from 5.9 to 13.1 GHz, which is suitable for ultra wideband (UWB) outdoor propagation. The prototype is experimentally validated for frequencies within and greater than UWB. Transfer function, impulse response, and group delay has been plotted in order to address the time domain characteristics of the proposed antenna with fidelity factor values. The possible applications cover wireless local area network, C-band, Ku-band, K-band operations, Worldwide Interoperability for Microwave Access, and Wireless USB.

scholarly journals A CPW-Fed Rectangular Ring Monopole Antenna for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sangjin Jo ◽  
Hyunjin Choi ◽  
Beomsoo Shin ◽  
Sangyeol Oh ◽  
Jaehoon Lee
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Feed Line ◽  
Compact Size

We present a simple coplanar waveguide- (CPW-) fed rectangular ring monopole antenna designed for dual-band wireless local area network (WLAN) applications. The antenna is based on a simple structure composed of a CPW feed line and a rectangular ring. Dual-band WLAN operation can be achieved by controlling the distance between the rectangular ring and the ground plane of the CPW feed line, as well as the horizontal vertical lengths of the rectangular ring. Simulated and measured data show that the antenna has a compact size of21.4×59.4 mm2, an impedance bandwidths of 2.21–2.70 GHz and 5.04–6.03 GHz, and a reflection coefficient of less than −10 dB. The antenna also exhibits an almost omnidirectional radiation pattern. This simple compact antenna with favorable frequency characteristics therefore is attractive for applications in dual-band WLAN.

A new compact dual band printed monopole antenna using electromagnetic band gap structures

Circuit World ◽  
2017 ◽  
Vol 43 (2) ◽  
pp. 56-62 ◽  
Author(s):  
El Amjed Hajlaoui
Keyword(s):  
Band Gap ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Radiation Patterns ◽  
Electromagnetic Band Gap ◽  
Content Type ◽  
New Type ◽  
Printed Monopole Antenna ◽  
Printed Monopole

Purpose The purpose of this paper is to present a new dual-band printed monopole antenna with a partial ground with two notched bands based on electromagnetic band gap (EBG) structures. A new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed. Design/methodology/approach The proposed antenna consists of a pair of EBG structures using a transmission line model. The proposed antenna is designed on an FR4 substrate with a thickness of 1 mm and permittivity (er) = 4.3. Findings The measured results show good dual-band operations with −10 dB impedance bandwidths of 9.1 and 36.2 per cent centered at 2.45 and 6.364 GHz, respectively, which covers the wireless local area network (WLAN) operating bands. Originality/value A new type of EBG antenna with radiation patterns and antenna gains over the operating bands has been developed.

scholarly journals Hexagonal Printed Monopole Antenna with Triple Stop Bands for UWB Application

2019 ◽  
Vol 38 (2) ◽  
pp. 335-340 ◽  
Author(s):  
Muhammad Irfan Khattak ◽  
Muhammad Irshad Khan ◽  
Zaka Ullah ◽  
Gulzar Ahmad ◽  
Amad Khan
Keyword(s):  
Electromagnetic Interference ◽  
Communication Systems ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Area Network ◽  
International Telecommunication Union ◽  
Printed Monopole Antenna ◽  
Printed Monopole

Inherently UWB (Ultra Wideband) communication systems comes with interference problem with some if the existing narrowband communication systems. These bands are stopped with the help of band-stop filter in order to reduce electromagnetic interference However, the complexity and limitations are increased due to these filters, hence this solution is turned down in those applications where design complications and complexity is of concern. Introducing various slots of specific shapes and exact dimensions however, have solved this issue for the researchers around the world. This paper presents a hexagonal PMA (Printed Monopole Antenna) with triple stop bands. The antenna is used for UWB application. The antenna is stopped the WiMAX (Worldwide Interoperability for Microwave Access), WLAN (Wireless Local Area Network) and ITU (International Telecommunication Union) bands. The antenna dimensions are 30x28x16 mm3. FR4 is used between ground and radiating patch with relative permittivity of 4.4. The VSWR (Voltage Standing Wave Ratio) is less than 2 between 3-11 GHz except WiMAX (3.1-3.7 GHz), WLAN (5.1-5.8 GHz) and the ITU frequency band (7.95-8.4 GHz). The antenna is design in CST software.

scholarly journals Design of Half Circular Disc Printed Monopole Antenna for Ultra Wide Band and Super Wide Band Applications

2020 ◽  
Author(s):  
Abdul Wajid ◽  
Muhammad Irshad Khan ◽  
Muhammad Anab ◽  
Muhammad Irfan Khattak
Keyword(s):  
Local Area Network ◽  
Dielectric Material ◽  
Ground Plane ◽  
Wide Band ◽  
Monopole Antenna ◽  
Radiation Efficiency ◽  
Circular Disc ◽  
Area Network ◽  
Printed Monopole Antenna ◽  
Printed Monopole

In this paper, a half-circular disc PMA (Printed Monopole Antenna) for SWB (Super Wide Band) applications is presented. The dimensions of the substrate is 40x40x1.7mm. The antenna is printed on Rogers RT5880 dielectric material. The antenna VSWR (Voltage Standing Wave Ratio) has less than 2 between 2.7 and 50 GHz. The antenna S11 has less than -10 between 2.7 and 50GHz. The antenna has a maximum gain of 12.4dBi. The BW (Bandwidth) of the proposed antenna is about 47.3 GHz. The antenna covered the WiMAX ((Worldwide Interoperability for Microwave Access), WLAN (Wireless Local Area Network), X band, Ka band, Ku band, 4G band, and the band of 5G (Fifth Generation) at the same time with nice gain and radiation efficiency. The radiator of the proposed antenna designs from a half-circular disc, rectangle, and triangle. The antenna has a partial ground plane. Three slots are etched in the ground plane for better impedance matching, two are circular slots and one is the rectangular slot. The antenna design is simulated in CST microwave studio 2016. The antenna has good radiation efficiency, other parameters such as VSWR S11, gain, and radiation pattern are discussed in detail.

COMPACT DUAL-BAND DIELECTRIC RESONATOR ANTENNA FOR 2.4/5.8 GHZ WLAN APPLICATIONS

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
A. Mataria ◽  
M. R. Kamarudin ◽  
M. Khalily
Keyword(s):  
Radio Frequency Identification ◽  
Dielectric Resonator ◽  
Local Area Network ◽  
Monopole Antenna ◽  
Dual Band ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dielectric Resonator Antenna ◽  
Dual Band Antenna

Design of a Dual-Band Dielectric Resonator Antenna (DRA) for the radio-frequency identification (RFID) and wireless local area network (WLAN) is presented. The necessity of a compact sized dual-band antenna is to allow the manufacturers to produce small size high-performance WLAN access points. The proposed antenna consists of printed T-Shaped monopole antenna and rectangular dielectric resonator to operate simultaneously at 2.4 and 5.8 GHz. The monopole antenna was printed on a standard 1.6 mm FR4 substrate material. Impedance bandwidth for -10 dB return loss in the 2.35 GHz and 5.86 GHz center frequency reaches 0.25 GHz (2.22 GHz to 2.47 GHz) and 0.28 GHz (5.72 GHz to 6 GHz), respectively. A good agreement is achieved between measured and simulated results.  This compact antenna fed by a 50 Ω microstrip line is a low-profile and easy to manufacture antenna.

Dual-Band Flexible Antenna for WLAN/WiMAX Applications

2019 ◽  
Vol 09 ◽  
Author(s):  
Poonam Thanki ◽  
Falguni Raval
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Flexible Substrate ◽  
Ground Plane ◽  
Local Area ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size ◽  
Flexible Antenna

Aims: This paper presents the development of Co-Planar Waveguide (CPW) fed dualband, compact, and flexible antenna. The antenna is designed on flexible substrate jeans; so, it is suitable for wearable applications. <p></p> Objectives: The proposed antenna generates dual-band at 3.36GHz –3.61GHz and at 5.01 GHz – 5.18 GHz. The antenna has a compact size of 40×30 mm2. The antenna consists of a rectangular patch having a slot which is responsible for the first band and slot in the ground plane which is responsible for the second band. <p></p> Methods: By optimizing the dimensions, the antenna gives dual-band at 3.5 GHz and 5.1 GHz with impedance bandwidth of 250 MHz and 170 MHz, respectively. The performance of the antenna such as gain and radiation pattern over the operating band has been also discussed. <p></p> Conclusion: This proposed antenna with the first band at 3.5GHz is suitable for Wi-MAX (Worldwide Interoperability for Microwave Access) and second band at 5.1GHz is suitable for Higher Wireless Local Area Network applications (WLAN). <p></p>

scholarly journals A Low Profile Dual-Band High Gain Directional Antenna for Anti-Interference WLAN Station Applications

2021 ◽  
Vol 11 (5) ◽  
pp. 2007
Author(s):  
Yuqing Dou ◽  
Guiting Dong ◽  
Jiafu Lin ◽  
Qibo Cai ◽  
Gui Liu
Keyword(s):  
Frequency Band ◽  
Local Area Network ◽  
Ground Plane ◽  
Directional Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Directional Radiation ◽  
Dual Band Antenna ◽  
Low Profile

This paper presents a low-profile dual-band antenna with directional radiation characteristics for wireless local area network (WLAN) applications. The proposed directional antenna is composed of a coupling microstrip line, two F-shaped strips, two rectangular strips, and a defected ground plane. The measured impedance bandwidth of the proposed antenna is 180 MHz (2.33–2.51 GHz) and 830 MHz (5.09–5.92 GHz), which can cover Institute of Electrical and Electronic Engineers (IEEE) 802.11 a/b/g frequency bands. The dual-band antenna exhibits a desirable directional radiation patterns in the vertical and horizontal planes with the peak gain of 6.55 dBi in the lower frequency band and 8.1 dBi in the higher frequency band. The measured antenna efficiency is 70% at 2.4 GHz and 84.5% at 5.5 GHz. The proposed dual-band WLAN station antenna is designed on a FR4 substrate with overall dimensions of 69 mm × 50 mm × 1.6 mm.

Sign in / Sign up

Export Citation Format

Share Document