Analysis and design of inclined fractal defected ground-based circularly polarized antenna for CA-band applications

2020 ◽  
pp. 1-10
Author(s):  
Sonal Gupta ◽  
Shilpee Patil ◽  
Chhaya Dalela ◽  
Binod Kumar Kanaujia
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Mobile Wimax ◽  
Impedance Bandwidth ◽  
Ieee 802.16E ◽  
Defected Ground Structure ◽  
Circularly Polarized ◽  
Analysis And Design ◽  
Centre Frequency ◽  
Good Agreement

Abstract Design of single-feed circularly polarized (CP) microstrip antenna is proposed in this article. The design employs the concept of E-shape patch with inclined fractal defected ground structure (IFDGS), which can improve the impedance bandwidth, gain, and axial ratio (AR) bandwidth. The excellent enhanced impedance bandwidth, axial ratio bandwidth, and gain are achieved by an inclined E-shaped fractal etched on the ground plane. The parameter studies of the E-shaped IFDGS are given to illustrate the way to obtain CP radiation. The third iterative IFDGS is fabricated on easily available FR4 substrate with a size of 0.494 λ0 × 0.494 λ0 × 0.019 λ0 (λ0 is the wavelength in free space at 3.624 GHz). The measured results verify the simulated results and show good agreement. The proposed antenna shows an impedance bandwidth of 12.7% at a centre frequency of 3.47 GHz and 3-dB AR bandwidth for this band is 2.39% at a centre frequency of 3.626 GHz. The measured peak gain for the proposed antenna is found as 8.1 dBi. The proposed antenna can be suitable for mobile WIMAX operation (IEEE 802.16e-2005 standard), wireless communication in CA-band and FCC.

Design of Dual Band Dual Sense Circularly Polarized Wide Slot Antenna with C-shaped Radiator for Wireless Applications

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 343-351 ◽  
Author(s):  
Shilpee Patil ◽  
A. K. Singh ◽  
Binod K. Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Centre Frequency ◽  
Low Profile ◽  
Peak Gain

Abstract A low profile wide slot antenna for dual band and dual sense circular polarization (CP) is proposed here and is simulated by using HFSS simulation software.The proposed antenna having a C shaped patch for dual band operation and a wide square slot etched on the ground with two strips for CP operation. In between radiating patch and ground plane, designed antenna has a layer of easily available dielectric (FR-4) material. Proposed antenna shows an impedance bandwidth of 13.8 % at 2.38 GHz of centre frequency and 9.7 % at 4.43 GHz of centre frequency for lower and upper band respectively. The 3-dB axial ratio (AR) bandwidths for lower and upper band are 18.8 % (at 2.44 GHz of centre frequency) and 13.3 % (at 4.29 GHz of centre frequency), respectively. The peak gain for the lower and upper band is found as 4.1 dBi and 3.3 dBi, respectively. A close agreement has been found between the simulated and the measured results.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

Development and Miniaturized of Circularly Polarization Diversity at Cavity Backed SIW Antenna for X-Band Application

Frequenz ◽  
2019 ◽  
Vol 73 (9-10) ◽  
pp. 317-320
Author(s):  
Saeid Karamzadeh ◽  
Vahid Rafiei ◽  
Hasan Saygin
Keyword(s):  
Schottky Diodes ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Polarization Diversity ◽  
Circularly Polarized ◽  
Left Hand ◽  
Low Profile ◽  
X Band ◽  
Coaxial Feed ◽  
Good Agreement

Abstract In this work circularly polarization diversity has been achieved by utilizing two Schottky diodes on low profile cavity-backed substrate integrated waveguide (CBSIW). In comparison with other studies in the literature, the size of antenna has been reduced to 0.54λg × 0.76λg by helping a 50-Ohm coaxial feed line. The impedance bandwidth, axial ratio bandwidth and antenna gain are improved to 10.02 %, 5.2 % and 7.68dBi, respectively. In addition, the proposed antenna can generate either a left-hand circularly polarized (LHCP) or a right-hand circularly polarized (RHCP) radiation. The developed antenna was fabricated and tested and the achieved results were in good agreement with the simulated one.

scholarly journals A Single-Point-Fed Wideband Circularly Polarized Rectangular Dielectric Resonator Antenna

2016 ◽  
Vol 2016 ◽  
pp. 1-9
Author(s):  
Deqiang Yang ◽  
Meng Zou ◽  
Jin Pan
Keyword(s):  
Dielectric Resonator ◽  
Single Point ◽  
Axial Ratio ◽  
Design Concept ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Circularly Polarized ◽  
Measured Impedance ◽  
Rectangular Dielectric Resonator Antenna ◽  
Good Agreement

A single-point-fed circularly polarized (CP) rectangular dielectric resonator antenna (DRA) with wide CP bandwidth is presented. By usingTE111andTE113modes of the rectangular DRA, a wideband CP performance is achieved. The coupling slot of the antenna contains a resistor loaded monofilar-spiral-slot and four linear slots. Design concept of the proposed antenna is demonstrated by simulations, and parameter studies are carried out. Prototype of the proposed antenna was fabricated and measured. Good agreement between the simulation and measurement is obtained. The measured impedance bandwidth (|S11|<-10 dB) and 3 dB axial-ratio (AR) bandwidth are 51.4% (1.91–3.23 GHz) and 33.0% (2.15–3.00 GHz), respectively.

Compact circularly polarized antenna with wide axial ratio bandwidth using modified quasi-self-complementary structure

2018 ◽  
Vol 11 (1) ◽  
pp. 35-40 ◽  
Author(s):  
Gunjan Srivastava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Peak Gain

A compact circularly polarized antenna with wide axial ratio bandwidth (ARBW) using quasi-self-complementary (QSC) structure is presented. A 3-dB ARBW is achieved by shortening the ground plane of the QSC structure. Furthermore, the wide ARBW is obtained by the introduction of a stepped stub in the extended ground plane of the QSC structure. The antenna is fabricated on a FR4 substrate with the overall dimensions of 25 mm × 22 mm × 0.8 mm. The proposed antenna has an impedance bandwidth of 5.9 GHz (2.4–8.3 GHz, 110%) and 3 dB ARBW of 1.6 GHz (2.4–4 GHz, 50%). A peak gain of 1–3 dBi is observed within the 3 dB ARBW.

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

Analysis and Design of a Multi Octave Circularly Polarized Monopole Antenna for UWB, X and Ku-Band Applications

2018 ◽  
Vol 7 (3.4) ◽  
pp. 80
Author(s):  
Saritha Vanka ◽  
Tanmayi Seedrala ◽  
Jhansi Rani Areti
Keyword(s):  
Return Loss ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Frequency Region ◽  
Monopole Antenna ◽  
Impedance Bandwidth ◽  
Good Correspondence ◽  
Circularly Polarized ◽  
Analysis And Design ◽  
Ku Band

This work presents a circularly polarized, CPW-Fed multi band operating monopole antenna. The monopole antenna consists of three parasitic elements, along with a stub at ground for impedance matching. The parasitic elements so far accumulated have shown their excellence in increasing the impedance bandwidth over the 6-18GHz band. The antenna was carved on FR-4 epoxy substrate which result a copper clad laminated structure. The CPW-Fed monopole antenna exhibits excellent circular polarization levels in the frequency region 6-18GHz. The simulation resulted a Return loss of less than -10dB, with good axial ratio less than -3dB over entire band of interest. The simulation was carried out through HFSS microwave studio. The antenna measured values are in good correspondence to the simulated values. 

A printed wide-beamwidth circularly polarized antenna via two pairs of radiating slots placed in a square contour

2016 ◽  
Vol 9 (3) ◽  
pp. 649-656 ◽  
Author(s):  
Neng-Wu Liu ◽  
Lei Zhu ◽  
Wai-Wa Choi
Keyword(s):  
Ground Plane ◽  
Large Angle ◽  
Axial Ratio ◽  
Dielectric Substrate ◽  
Slot Antenna ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Low Profile ◽  
Orthogonal Pairs ◽  
Good Agreement

A low-profile circularly polarized (CP) slot antenna to achieve a wide axial-ratio (AR) beamwidth is proposed in this paper. The radiating patch consists of two orthogonal pairs of parallel slots etched symmetrically onto a ground plane. Firstly, our theoretical study demonstrates that the CP radiation can be satisfactorily achieved at the broadside, when the vertical and horizontal paired-slots are excited in the same amplitude with 90° phase difference. Secondly, the principle of CP radiation of the proposed antenna on an infinite ground plane is described. Through analyzing the spacing between two parallel slots, the |Eθ| and |Eφ| radiation patterns can be made approximately identical with each other over a large angle range. As such, the slot antenna achieves a wide AR beamwidth. After that, the 3 dB AR beamwidth with respect to the size of a finite ground plane is investigated to constitute a practical CP antenna on a finite ground plane. In final, the proposed CP antenna with a 1–4 probe-to-microstrip feeding network is designed and fabricated on a finite ground plane of a dielectric substrate. Measured results are shown to be in good agreement with the simulated ones about the gain, reflection coefficient, AR bandwidth, and radiation patterns. Most importantly, a wide 3 dB AR beamwidth of 126° and low-profile property with the height of 0.036λ0 are achieved.

scholarly journals A Low-Profile Circularly Polarized Conical-Beam Antenna with Wide Overlap Bandwidth

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Wei He ◽  
Yejun He ◽  
Long Zhang ◽  
Sai-Wai Wong ◽  
Wenting Li ◽  
...  
Keyword(s):  
Electric Field ◽  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Beam Radiation ◽  
Circularly Polarized ◽  
Low Profile ◽  
Two Sides ◽  
Conical Beam

In this paper, a low-profile circularly polarized (CP) conical-beam antenna with a wide overlap bandwidth is presented. Such an antenna is constructed on the two sides of a square substrate. The antenna consists of a wideband monopolar patch antenna fed by a probe in the center and two sets of arc-hook-shaped branches. The monopolar patch antenna is loaded by a set of conductive shorting vias to achieve a wideband vertically polarized electric field. Two sets of arc-hook-shaped parasitic branches connected to the patch and ground plane can generate a horizontally polarized electric field. To further increase the bandwidth of the horizontally polarized electric field, two types of arc-hook-shaped branches with different sizes are used, which can generate another resonant frequency. When the parameters of the arc-hook-shaped branches are reasonably adjusted, a 90° phase difference can be generated between the vertically polarized electric field and the horizontally polarized electric field, so that the antenna can produce a wideband CP radiation pattern with a conical beam. The proposed antenna has a wide impedance bandwidth ( ∣ S 11 ∣ < − 10   dB ) of 35.6% (4.97-7.14 GHz) and a 3 dB axial ratio (AR) bandwidth at phi = 0 ° and theta = 35 ° of about 30.1% (4.97-6.73 GHz). Compared with the earlier reported conical-beam CP antennas, an important feature of the proposed antenna is that the AR bandwidth is completely included in the impedance bandwidth, that is, the overlap bandwidth of ∣ S 11 ∣ < − 10   dB and AR < 3   dB is 30.1%. Moreover, the stable omnidirectional conical-beam radiation patterns can be maintained within the whole operational bandwidth.

scholarly journals Wideband Crescent-Shaped Slotted Printed Antenna with Radiant Circular Polarisation

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Akrem Asmeida ◽  
Zuhairiah Zainal Abidin ◽  
Shaharil Mohd Shah ◽  
Muhammad Ramlee Kamarudin ◽  
Norun Abdul Malek ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Efficiency ◽  
Impedance Matching ◽  
Ground Plane ◽  
Axial Ratio ◽  
Basic Structure ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Circular Polarisation ◽  
Rectangular Slot

Producing a suitable impedance matching between the radiating element and the feedline is the prior hurdle to overcome for a wideband antenna with circular polarisation designs. This study presents a novel antenna consisting of a defected ground structure (DGS) and a crescent-slot radiating patch for broad impedance bandwidth. In addition, a narrow rectangular slot was etched on the ground plane for antenna compactness and outcomes improvement. In order to examine the reliability, two different numerical softwares were compared based on the antenna’s basic structure. Apart from this, an equivalent circuit of the proposed prototype is modelled logically using ADS 2016. The numerical results demonstrate that the impedance bandwidth was about 74.6% for < −10 dB, while the 3 dB axial ratio bandwidth greater than 53% was achieved. In the operational bandwidth of the design, good impedance matching and high efficiency were seen, which shows that this design is appropriate for modern wireless communication systems in ISM and GSM bands.

Sign in / Sign up

Export Citation Format

Share Document