Fluid-Bed Combustion of Solid Wastes

Author(s):  
ROBERT H. VANDER MOLEN
Keyword(s):  
Author(s):  
Nickolas J. Themelis

A 2007 WTERT survey (1) showed that the global waste-to-energy capacity (WTE) increased in the period 2001–2007 by about 4 million metric tons per annum. By far, the principal technology used globally for energy recovery from municipal solid wastes is combustion of “as received” MSW on moving grates (“mass burn” or stocker technology). The three dominant grate technologies, by Martin, Von Roll, and Keppel-Seghers, represent about 75% of the total growth in capacity. In the same period, Japan and China built several plants that were based either on the direct smelting or on fluid bed combustion of solid wastes. In China, there have been some mass-burn new plants and also over forty circulating fluid bed WTEs, using technologies developed by the Institute of Thermal Power Engineering of Zhejiang University and by the Institute of Engineering Thermophysics of the Chinese Academy of Sciences. WTE technologies in China are actively supported by the national and local governments and many more plants are projected as sprawling cities are running out of landfill space. Japan is the largest user of thermal treatment of MSW in the world (40 million tonnes) and some of the newest plants use stoker technology, such as the Hiroshima WTE designed by the famous architect Taniguchi and the Sendai WTE that uses advanced oxygen enrichment technology. However, there are also over 100 thermal treatment plants based on relatively novel processes. The Direct Smelting and the Ebara fluid bed technologies developed in Japan require pre-processing of the MSW, combust the resulting syngas to generate steam, and produce a vitrified residue. The Thermoselect Gasification and Melting technology, originally developed in Europe, has been adopted successfully in seven Japanese facilities by JFE, a company with extensive experience both in high temperature metal processing and with various MSW thermal treatment technologies, including mass burn. This paper also includes a brief report on the results of a study by WTERT on ways to increase beneficial uses of WTE ash in the U.S.


2015 ◽  
Vol 1 (1) ◽  
pp. 39-48
Author(s):  
Muzher Mahdi Ibrahem ◽  
Khalid Ahmed Salih
Keyword(s):  

2017 ◽  
Author(s):  
Shno Mustafa Ali ◽  
Younis Mustafa Ali ◽  
Mariwan Ridha Faris
Keyword(s):  

2020 ◽  
Vol 5 (4) ◽  
pp. 202-209
Author(s):  
Alexander Topal ◽  
◽  
Iryna Holenko ◽  
Luidmyla Haponych ◽  
◽  
...  

For the municipal solid waste (MSW) to be used in a proper way, it is necessary to implement clean technologies capable of thermal treatment of MSW and RDF in order to produce heat and electricity while meeting current ecological requirements. Nowadays, a number of technologies for MSW/RDF thermal treating are being used worldwide. Among them, the most proven technologies, applicable for industrial introduction, have been considered while analyzing their advantages/ disadvantages accounting for local conditions of Ukraine.


2013 ◽  
Vol 13 (3) ◽  
Author(s):  
Djawardi Djawardi ◽  
Yustiar Gunawan

The business unit's black tea processing of Perkebunan Nusantara suffered a loss of approximately Rp.60 billion. This is caused by the failure to achieve the quality and quantity of production which has been targeted by the management. Black tea processing factory "Pahit Madu" is required to improve the performance of the production process. To improve the production of black tea starts from improved production equipment through improved equipment utilization. One method ofmeasuring the effectiveness of using an apparatus is Overall EquipmentEffectiveness (OEE). OEE calculation results show that black tea factory "Pahit Madu" for four (4) years under the standard. Means, the effectiveness of utilization of equipment in the factory black tea "Pahit Madu" was still very low. This was shown by the low performance equipment in the milling unit, drying unit and sortation unit. Toimprove the performance of the plant should begin by increasing the Cutting Tearing Curling (CTC) machine in milling stations, machines Fluid Bed Dryer (FBD) and Heat Exchanger (HE) at the drying stations, and Winnower machines at the sortation stations.


1992 ◽  
Vol 25 (7) ◽  
pp. 319-326 ◽  
Author(s):  
A. Wellinger ◽  
U. Baserga ◽  
K. Egger

Two new systems for the digestion of solid wastes at thermophilic temperatures were developped and are currently being investigated at our research institute. The first system (ANCOM) was designed to process straw-rich cattle manure with a natural dry matter content of 18% to 22%. First results demonstrated a good specific gas production of 1.2 m3 biogas per m3 digester volume and day (54% methane) corresponding to a gas yield of 400 l per kg VS. A second digester system was developed to treat fruit, garden and vegetable (FGV-) waste. Because FGV-waste tends to float, a stirred tank reactor was designed in cooperation with an engineering firm. The reactor includes a distinguished new stirring system taking up strong shear forces and a hydraulic feeding system which guarantees that even during recirculation of the material, the hygenized digested substrate leaving the digester is not brought in contact with the fresh incoming material. First results measured at an HRT of 40 days demonstrated a specific gas production of 2.7 m3 per m3 fermenter and day.


Sign in / Sign up

Export Citation Format

Share Document