Upper Mantle Density Anomalies, Tectonic Stress in the Lithosphere, and Plate Boundary Forces

Author(s):  
Martin H. P. Bott
Geology ◽  
2021 ◽  
Author(s):  
Steven Kidder ◽  
David J. Prior ◽  
James M. Scott ◽  
Hamid Soleymani ◽  
Yilun Shao

Peridotite xenoliths entrained in magmas near the Alpine fault (New Zealand) provide the first direct evidence of deformation associated with the propagation of the Australian-Pacific plate boundary through the region at ca. 25–20 Ma. Two of 11 sampled xenolith localities contain fine-grained (40–150 mm) rocks, indicating that deformation in the upper mantle was focused in highly sheared zones. To constrain the nature and conditions of deformation, we combine a flow law with a model linking recrystallized fraction to strain. Temperatures calculated from this new approach (625–970 °C) indicate that the observed deformation occurred at depths of 25–50 km. Calculated shear strains were between 1 and 100, which, given known plate offset rates (10–20 mm/yr) and an estimated interval during which deformation likely occurred (<1.8 m.y.), translate to a total shear zone width in the range 0.2–32 km. This narrow width and the position of mylonite-bearing localities amid mylonite-free sites suggest that early plate boundary deformation was distributed across at least ~60 km but localized in multiple fault strands. Such upper mantle deformation is best described by relatively rigid, plate-like domains separated by rapidly formed, narrow mylonite zones.


2021 ◽  
Author(s):  
Graeme Eagles ◽  
Lucía Pérez Díaz ◽  
Karin Sigloch

<p>Observations of the apparent links between plate speeds and the global distribution of plate boundary types have led to the suggestion that subduction may provide the largest component in the balance of torques maintaining plate motions. This would imply that plate speeds should not exceed the sinking rates of slabs into the upper mantle. Instances of this ‘speed limit’ having been broken may thus hint at the existence of driving mechanisms additional to those resulting from plate boundary forces. The arrival and emplacement of the Deccan-Réunion mantle plume beneath the Indian-African plate boundary in the 67-62 Ma period has been discussed in terms of one such additional driving mechanism, leading to the establishment of “plume-push” hypothesis, which in recent years has gained significant traction. We challenge the model-based observations that form the principal evidence in favour of plume-push: a late Cretaceous pulse of anticorrelating accelerations and decelerations in seafloor spreading rates around the African and Indian plates. Using existing and newly-calculated high-resolution models of plate motion, we instead document an increase in divergence rates at 67-64 Ma. Because of its ubiquity, we consider this increase to be the artefact of a timescale error affecting chrons 29-28. Corrected for this artefact, the evolution of plate speeds resembles a smooth continuation of pre-existing late Cretaceous trends, consistent with the idea that the arrival of the Réunion plume did not substantially affect the existing balance of plate boundary forces on the Indian and African plates. </p>


Solid Earth ◽  
2017 ◽  
Vol 8 (6) ◽  
pp. 1211-1239 ◽  
Author(s):  
Thomas van der Werf ◽  
Vasileios Chatzaras ◽  
Leo Marcel Kriegsman ◽  
Andreas Kronenberg ◽  
Basil Tikoff ◽  
...  

Abstract. The rheology of lower crust and its transient behavior in active strike-slip plate boundaries remain poorly understood. To address this issue, we analyzed a suite of granulite and lherzolite xenoliths from the upper Pleistocene–Holocene San Quintín volcanic field of northern Baja California, Mexico. The San Quintín volcanic field is located 20 km east of the Baja California shear zone, which accommodates the relative movement between the Pacific plate and Baja California microplate. The development of a strong foliation in both the mafic granulites and lherzolites, suggests that a lithospheric-scale shear zone exists beneath the San Quintín volcanic field. Combining microstructural observations, geothermometry, and phase equilibria modeling, we estimated that crystal-plastic deformation took place at temperatures of 750–890 °C and pressures of 400–560 MPa, corresponding to 15–22 km depth. A hot crustal geotherm of 40 ° C km−1 is required to explain the estimated deformation conditions. Infrared spectroscopy shows that plagioclase in the mafic granulites is relatively dry. Microstructures are interpreted to show that deformation in both the uppermost lower crust and upper mantle was accommodated by a combination of dislocation creep and grain-size-sensitive creep. Recrystallized grain size paleopiezometry yields low differential stresses of 12–33 and 17 MPa for plagioclase and olivine, respectively. The lower range of stresses (12–17 MPa) in the mafic granulite and lherzolite xenoliths is interpreted to be associated with transient deformation under decreasing stress conditions, following an event of stress increase. Using flow laws for dry plagioclase, we estimated a low viscosity of 1.1–1.3×1020 Pa ⋅ s for the high temperature conditions (890 °C) in the lower crust. Significantly lower viscosities in the range of 1016–1019 Pa ⋅ s, were estimated using flow laws for wet plagioclase. The shallow upper mantle has a low viscosity of 5.7×1019 Pa ⋅ s, which indicates the lack of an upper-mantle lid beneath northern Baja California. Our data show that during post-seismic transients, the upper mantle and the lower crust in the Pacific–Baja California plate boundary are characterized by similar and low differential stress. Transient viscosity of the lower crust is similar to the viscosity of the upper mantle.


2010 ◽  
Vol 47 (5) ◽  
pp. 621-632 ◽  
Author(s):  
R. D. Hyndman

The crust and upper mantle thermal regime of the Canadian Cordillera and its tectonic consequences were an important part of the Cordillera Lithoprobe program and related studies. This article provides a review, first of the thermal constraints, and then of consequences in high surface elevation and current tectonics. Cordillera and adjacent craton temperatures are well constrained by geothermal heat flow, mantle tomography velocities, upper mantle xenoliths, and the effective elastic thickness, Te. Cordillera temperatures are very high and laterally uniform, explained by small scale convection beneath a thin lithosphere, 800–900 °C at the Moho, contrasted to 400–500 °C for the craton. The high temperatures provide an explanation for why the Cordillera has high elevation in spite of a generally thin crust, ∼33 km, in contrast to low elevation and thicker crust, 40–45 km, for the craton. The Cordillera is supported ∼1600 m by lithosphere thermal expansion. In the Cordillera only the upper crust has significant strength; Te ∼ 15 km, in contrast to over 60 km for the craton. The Cordillera is tectonically active because the lithosphere is sufficiently weak to be deformed by plate boundary and gravitational forces; the craton is too strong. The Canadian Cordillera results have led to new understandings of processes in backarcs globally. High backarc temperatures and weak lithospheres explain the tectonic activity over long geological times of mobile belts that make up about 20% of continents. They also have led to a new understanding of collision orogenic heat in terms of incorporation of already hot backarcs.


2011 ◽  
Vol 2011 ◽  
pp. 1-15 ◽  
Author(s):  
Masaki Kanao ◽  
Yusuke Usui ◽  
Tomofumi Inoue ◽  
Akira Yamada

Broadband seismic deployments have been carried out in the Lützow-Holm Bay region (LHB), Dronning Maud Land, East Antarctica. The recorded teleseismic and local events are of sufficient quality to image the structure and dynamics of the crust and mantle of the terrain. Passive seismic studies by receiver functions and shear wave splitting suggest a heterogeneous upper mantle. Depth variations in topography for upper mantle discontinuities were derived from long period receiver function, indicating a shallow depth discontinuity at 660 km beneath the continental area of LHB. These results provide evidence of paleo upwelling of the mantle plume associated with Gondwana break-up. SKS splitting analysis anticipated a relationship between “fossil” anisotropy in lithospheric mantle and past tectonics. Moreover, active source surveys (DSSs) imaged lithospheric mantle reflections involving regional tectonic stress during Pan-African and succeeding extension regime at the break-up. By combining the active and passive source studies of the mantle structure, we propose an evolution model of LHB for constructing the present mantle structure.


Sublithospheric loading arises from anomalous densities in the mantle, such as cool subducting slabs and regions affected by hot spots. Such loading gives rise to isostatic flexure and to tectonic stress in the strong upper lithosphere. Simple models of sublithospheric loading have been studied by finite-element analysis. The maximum loading stress produced by a simple load increases with its width towards the theoretical density-moment function value, but is found to be almost independent of depth for a narrow load (in contrast to a wide load). A layer of low viscosity above the load reduces the stress, depending on its thickness and viscosity. If the lithospheric stress arising from loading is intersected by a zone or plane of weakness, then plate-boundary tractions develop on the adjacent plates resulting from the redistribution of stress. It is shown, by modelling, that ridge push, slab pull and trench suction can be explained in this way.


2001 ◽  
Vol 09 (04) ◽  
pp. 1647-1657
Author(s):  
MITSUKO FURUMURA ◽  
TAKASHI FURUMURA

Seismic wave propagation in Hokkaido, Japan, for large destructive earthquakes are simulated by the 3-D finite-difference method. The simulation results indicate that the peak ground velocity distribution for an inland earthquake is nearly circle, but for a plate-boundary earthquake it is irregular, due to influence of lateral heterogeneity in the crust and upper mantle beneath the Hokkaido region.


Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1351
Author(s):  
Julie Newman ◽  
Vasileios Chatzaras ◽  
Basil Tikoff ◽  
Jan R. Wijbrans ◽  
William M. Lamb ◽  
...  

We present results from a natural deformed shear zone in the Turon de Técouère massif of the French Pyrenees that directly addresses the processes involved in strain localization, a topic that has been investigated for the last 40 years by structural geologists. Paleopiezometry indicates that differential stresses are variable both spatially across the zone, and temporally during exhumation. We have, however, also calculated strain rate, which remains constant despite changes in stress. This result appears to be at odds with recent experimental deformation on monophase (olivine) rocks, which indicate that strain localization occurs dominantly as a result of constant stress. We hypothesize that in the Turon de Técouère massif—and many natural shear zones—strain localization occurs as a result of reactions, which decrease the grain size and promote the activation of grain size sensitive deformation mechanisms. From a tectonics perspective, this study indicates that the deformation rate in a particular plate boundary is relatively uniform. Stress, however, varies to accommodate this deformation. This viewpoint is consistent with deformation at a plate boundary, but it is not the typical way in which we interpret strain localization.


Sign in / Sign up

Export Citation Format

Share Document