scholarly journals Wafer-scale transfer route for top–down III-nitride nanowire LED arrays based on the femtosecond laser lift-off technique

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Nursidik Yulianto ◽  
Andam Deatama Refino ◽  
Alina Syring ◽  
Nurhalis Majid ◽  
Shinta Mariana ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Large Scale ◽  
Strain Relaxation ◽  
Top Down ◽  
Light Emitting ◽  
Wafer Scale ◽  
Gan Nanowire ◽  
Lift Off ◽  
Cu Foil ◽  
Sacrificial Materials

AbstractThe integration of gallium nitride (GaN) nanowire light-emitting diodes (nanoLEDs) on flexible substrates offers opportunities for applications beyond rigid solid-state lighting (e.g., for wearable optoelectronics and bendable inorganic displays). Here, we report on a fast physical transfer route based on femtosecond laser lift-off (fs-LLO) to realize wafer-scale top–down GaN nanoLED arrays on unconventional platforms. Combined with photolithography and hybrid etching processes, we successfully transferred GaN blue nanoLEDs from a full two-inch sapphire substrate onto a flexible copper (Cu) foil with a high nanowire density (~107 wires/cm2), transfer yield (~99.5%), and reproducibility. Various nanoanalytical measurements were conducted to evaluate the performance and limitations of the fs-LLO technique as well as to gain insights into physical material properties such as strain relaxation and assess the maturity of the transfer process. This work could enable the easy recycling of native growth substrates and inspire the development of large-scale hybrid GaN nanowire optoelectronic devices by solely employing standard epitaxial LED wafers (i.e., customized LED wafers with additional embedded sacrificial materials and a complicated growth process are not required).

scholarly journals Femtosecond Laser Lift‐Off with Sub‐Bandgap Excitation for Production of Free‐Standing GaN Light‐Emitting Diode Chips

2019 ◽  
Vol 22 (2) ◽  
pp. 1901192 ◽  
Author(s):  
Steffen Bornemann ◽  
Nursidik Yulianto ◽  
Hendrik Spende ◽  
Yuliati Herbani ◽  
Joan Daniel Prades ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Light Emitting Diode ◽  
Free Standing ◽  
Light Emitting ◽  
Lift Off

scholarly journals Multifunctional wafer-scale graphene membranes for fast ultrafiltration and high permeation gas separation

2018 ◽  
Vol 4 (11) ◽  
pp. eaau0476 ◽  
Author(s):  
Kyoungjun Choi ◽  
Amirhossein Droudian ◽  
Roman M. Wyss ◽  
Karl-Philipp Schlichting ◽  
Hyung Gyu Park
Keyword(s):  
Thin Film ◽  
High Performance ◽  
Large Scale ◽  
Interfacial Polymerization ◽  
Top Down ◽  
Wafer Scale ◽  
20 Nm ◽  
Highly Porous ◽  
Graphene Membranes ◽  
Vapor Liquid

Reliable and large-scale manufacturing routes for perforated graphene membranes in separation and filtration remain challenging. We introduce two manufacturing pathways for the fabrication of highly porous, perforated graphene membranes with sub–100-nm pores, suitable for ultrafiltration and as a two-dimensional (2D) scaffold for synthesizing ultrathin, gas-selective polymers. The two complementary processes—bottom up and top down—enable perforated graphene membranes with desired layer number and allow ultrafiltration applications with liquid permeances up to 5.55 × 10−8 m3 s−1 Pa−1 m−2. Moreover, thin-film polymers fabricated via vapor-liquid interfacial polymerization on these perforated graphene membranes constitute gas-selective polyimide graphene membranes as thin as 20 nm with superior permeances. The methods of controlled, simple, and reliable graphene perforation on wafer scale along with vapor-liquid polymerization allow the expansion of current 2D membrane technology to high-performance ultrafiltration and 2D material reinforced, gas-selective thin-film polymers.

scholarly journals Social Media in and Around a Temporary Large-Scale Refugee Shelter in the Netherlands

2021 ◽  
Vol 7 (2) ◽  
pp. 205630512110249
Author(s):  
Peer Smets ◽  
Younes Younes ◽  
Marinka Dohmen ◽  
Kees Boersma ◽  
Lenie Brouwer
Keyword(s):  
Social Media ◽  
The Netherlands ◽  
Crisis Communication ◽  
Asylum Seekers ◽  
Large Scale ◽  
State Policies ◽  
Refugee Crisis ◽  
Top Down ◽  
And Migration

During the 2015 refugee crisis in Europe, temporary refugee shelters arose in the Netherlands to shelter the large influx of asylum seekers. The largest shelter was located in the eastern part of the country. This shelter, where tents housed nearly 3,000 asylum seekers, was managed with a firm top-down approach. However, many residents of the shelter—mainly Syrians and Eritreans—developed horizontal relations with the local receiving society, using social media to establish contact and exchange services and goods. This case study shows how various types of crisis communication played a role and how the different worlds came together. Connectivity is discussed in relation to inclusion, based on resilient (non-)humanitarian approaches that link society with social media. Moreover, we argue that the refugee crisis can be better understood by looking through the lens of connectivity, practices, and migration infrastructure instead of focusing only on state policies.

Ultrashort Pulse Laser Lift-Off Processing of InGaN/GaN Light-Emitting Diode Chips

2021 ◽  
Vol 3 (2) ◽  
pp. 778-788
Author(s):  
Nursidik Yulianto ◽  
Grandprix T. M. Kadja ◽  
Steffen Bornemann ◽  
Soniya Gahlawat ◽  
Nurhalis Majid ◽  
...  
Keyword(s):  
Pulse Laser ◽  
Ultrashort Pulse ◽  
Light Emitting Diode ◽  
Ultrashort Pulse Laser ◽  
Light Emitting ◽  
Lift Off

scholarly journals Improved Performance of GaN-Based Light-Emitting Diodes Grown on Si (111) Substrates with NH3 Growth Interruption

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 399
Author(s):  
Sang-Jo Kim ◽  
Semi Oh ◽  
Kwang-Jae Lee ◽  
Sohyeon Kim ◽  
Kyoung-Kook Kim
Keyword(s):  
Buffer Layer ◽  
Light Emitting Diodes ◽  
Defect Density ◽  
Strain Relaxation ◽  
Multiple Quantum Well ◽  
Light Output ◽  
Multiple Quantum ◽  
Light Emitting ◽  
Growth Interruption ◽  
Aln Buffer

We demonstrate the highly efficient, GaN-based, multiple-quantum-well light-emitting diodes (LEDs) grown on Si (111) substrates embedded with the AlN buffer layer using NH3 growth interruption. Analysis of the materials by the X-ray diffraction omega scan and transmission electron microscopy revealed a remarkable improvement in the crystalline quality of the GaN layer with the AlN buffer layer using NH3 growth interruption. This improvement originated from the decreased dislocation densities and coalescence-related defects of the GaN layer that arose from the increased Al migration time. The photoluminescence peak positions and Raman spectra indicate that the internal tensile strain of the GaN layer is effectively relaxed without generating cracks. The LEDs embedded with an AlN buffer layer using NH3 growth interruption at 300 mA exhibited 40.9% higher light output power than that of the reference LED embedded with the AlN buffer layer without NH3 growth interruption. These high performances are attributed to an increased radiative recombination rate owing to the low defect density and strain relaxation in the GaN epilayer.

scholarly journals Nanoimprinted multifunctional nanoprobes for a homogeneous immunoassay in a top-down fabrication approach

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hubert Brueckl ◽  
Astrit Shoshi ◽  
Stefan Schrittwieser ◽  
Barbara Schmid ◽  
Pia Schneeweiss ◽  
...  
Keyword(s):  
Thin Film ◽  
Nanoimprint Lithography ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
In Vitro Diagnostics ◽  
Top Down ◽  
Highly Sensitive ◽  
Optical And Magnetic Properties ◽  
Lift Off

AbstractMultifunctional nanoparticles are discussed as versatile probes for homogeneous immunoassays for in-vitro diagnostics. Top-down fabrication allows to combine and tailor magnetic and plasmonic anisotropic properties. The combination of nanoimprint lithography, thin film deposition, and lift-off processing provides a top-down fabrication platform, which is both flexible and reliable. Here, we discuss the material compositions and geometrical designs of monodisperse multicomponent nanoparticles and their consequences on optical and magnetic properties. The rotational hydrodynamics of nanoparticles is measured and considered under the influence of magnetic shape anisotropy in the framework of the Stoner-Wohlfarth theory. The plasmon-optical properties are explained by discrete-dipole finite-element simulations. Rotational dynamical measurements of imprinted nanoprobes for two test proteins demonstrate the applicability as highly sensitive biomolecular nanoprobes.

scholarly journals Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peipei Du ◽  
Jinghui Li ◽  
Liang Wang ◽  
Liang Sun ◽  
Xi Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Scale Production ◽  
Nonradiative Recombination ◽  
Large Area ◽  
Spatial Confinement ◽  
Light Emitting ◽  
Large Scale Production

AbstractWith rapid advances of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of patterned PeLEDs towards display panels is of increasing importance. However, most state-of-the-art PeLEDs are fabricated by solution-processed techniques, which are difficult to simultaneously achieve high-resolution pixels and large-scale production. To this end, we construct efficient CsPbBr3 PeLEDs employing a vacuum deposition technique, which has been demonstrated as the most successful route for commercial organic LED displays. By carefully controlling the strength of the spatial confinement in CsPbBr3 film, its radiative recombination is greatly enhanced while the nonradiative recombination is suppressed. As a result, the external quantum efficiency (EQE) of thermally evaporated PeLED reaches 8.0%, a record for vacuum processed PeLEDs. Benefitting from the excellent uniformity and scalability of the thermal evaporation, we demonstrate PeLED with a functional area up to 40.2 cm2 and a peak EQE of 7.1%, representing one of the most efficient large-area PeLEDs. We further achieve high-resolution patterned perovskite film with 100 μm pixels using fine metal masks, laying the foundation for potential display applications. We believe the strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

“Forward to David the Builder!” Georgia's (re)turn to language-centered nationalism

2016 ◽  
Vol 44 (4) ◽  
pp. 522-542 ◽  
Author(s):  
Christofer Berglund
Keyword(s):  
Large Scale ◽  
Nation Building ◽  
The State ◽  
Top Down ◽  
Bottom Up ◽  
The Past ◽  
Building Project ◽  
The Rose ◽  
State Language

After the Rose Revolution, President Saakashvili tried to move away from the exclusionary nationalism of the past, which had poisoned relations between Georgians and their Armenian and Azerbaijani compatriots. His government instead sought to foster an inclusionary nationalism, wherein belonging was contingent upon speaking the state language and all Georgian speakers, irrespective of origin, were to be equals. This article examines this nation-building project from a top-down and bottom-up lens. I first argue that state officials took rigorous steps to signal that Georgian-speaking minorities were part of the national fabric, but failed to abolish religious and historical barriers to their inclusion. I next utilize a large-scale, matched-guise experiment (n= 792) to explore if adolescent Georgians ostracize Georgian-speaking minorities or embrace them as their peers. I find that the upcoming generation of Georgians harbor attitudes in line with Saakashvili's language-centered nationalism, and that current Georgian nationalism therefore is more inclusionary than previous research, or Georgia's tumultuous past, would lead us to believe.

Attention Biases Visual Activity in Visual Short-term Memory

2014 ◽  
Vol 26 (7) ◽  
pp. 1377-1389 ◽  
Author(s):  
Bo-Cheng Kuo ◽  
Mark G. Stokes ◽  
Alexandra M. Murray ◽  
Anna Christina Nobre
Keyword(s):  
Large Scale ◽  
Short Term Memory ◽  
Control Mechanisms ◽  
Top Down ◽  
Short Term ◽  
Visual Activity ◽  
Visual Short Term Memory ◽  
Large Scale Network ◽  
Visual Areas ◽  
Scale Network

In the current study, we tested whether representations in visual STM (VSTM) can be biased via top–down attentional modulation of visual activity in retinotopically specific locations. We manipulated attention using retrospective cues presented during the retention interval of a VSTM task. Retrospective cues triggered activity in a large-scale network implicated in attentional control and led to retinotopically specific modulation of activity in early visual areas V1–V4. Importantly, shifts of attention during VSTM maintenance were associated with changes in functional connectivity between pFC and retinotopic regions within V4. Our findings provide new insights into top–down control mechanisms that modulate VSTM representations for flexible and goal-directed maintenance of the most relevant memoranda.

Sign in / Sign up

Export Citation Format

Share Document