scholarly journals Tempering of cocoa butter and chocolate using minor lipidic components

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jay Chen ◽  
Saeed M. Ghazani ◽  
Jarvis A. Stobbs ◽  
Alejandro G. Marangoni
Keyword(s):  
Mechanical Properties ◽  
Cocoa Butter ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Material Properties ◽  
Melting Behavior ◽  
Structure And Properties ◽  
Fat Crystal Networks ◽  
Surface Gloss ◽  
Component Addition

AbstractChocolate manufacture includes a complex tempering procedure to direct the crystallization of cocoa butter towards the formation of fat crystal networks with specific polymorphism, nano- and microstructure, melting behavior, surface gloss and mechanical properties. Here we investigate the effects of adding various minor non-triglyceride lipidic components to refined cocoa butter and chocolate on their physical properties. We discover that addition of saturated phosphatidylcholine and phosphatidylethanolamine to neutralized and bleached cocoa butter or molten and recrystallized commercial chocolate at 0.1% (w/w) levels, followed by rapid cooling to 20 °C in the absence of shear, accelerates crystallization, stabilizes the desirable Form V polymorph and induces the formation of chocolate with an optimal microstructure, surface gloss and mechanical strength. Final chocolate structure and properties are comparable to those of a commercial tempered chocolate. Minor lipidic component addition represents an effective way to engineer chocolate material properties at different length scales, thus simplifying the entire tempering process.

scholarly journals The effect of silanes as integral hydrophobic admixture on the physical properties of cement based materials

2021 ◽  
Vol 2069 (1) ◽  
pp. 012045
Author(s):  
K Grabowska ◽  
A Wieczorek ◽  
D Bednarska ◽  
M Koniorczyk
Keyword(s):  
Mechanical Properties ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Water Absorption ◽  
Cement Mortar ◽  
Organosilicon Compounds ◽  
Capillary Water ◽  
Main Ingredient ◽  
Capillary Water Absorption ◽  
Cement Based Materials

Abstract The paper explores the possibility of using organosilicon compounds (e.g., poly(dimethylsiloxane) and triethoxyoctylsilane) in commercial admixtures as internal hydrophobization agents for porous cement-based materials. The study involved the cement mortar with five different hydrophobic admixtures. Four of them is based on triethoxyoctylsilane, but with various concentration of the main ingredient, and one of them on poly(dimethylsiloxane). Mechanical properties, capillary water absorption, as well as microstructure were investigated. The organosilicon admixtures efficiently decrease the capillary water absorption even by 81% decreasing mechanical strength of cement mortar at the same time even by 55%. Only one admixture, based on poly(dimethylsiloxane) caused significant changes in microstructure of cement mortar.

Research on the Effects of Calcination Temperature on the Physical Properties of Titanium Gypsum

2014 ◽  
Vol 711 ◽  
pp. 189-192
Author(s):  
Yan Liu ◽  
Guo Zhong Li ◽  
Chuan Wei Du
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Calcination Temperature ◽  
Physical Effects

This paper studies the different calcination temperature on the properties of titanium gypsum physical effects, and the mechanism of the effects are discussed in this paper. Research has shown that with the increase of calcination temperature, the mechanical properties of titanium gypsum present a trend of after rising first down. When the calcination temperature is 180 °C, titanium gypsum calcined product mainly for the half water gypsum phase, the mechanical strength of samples of titanium gypsum achieve maximum at this time, The mechanical properties of titanium gypsum samples: 2h flexural strength was 0.94MPa, 2h compressive strength was 1.87MPa, absolutely dry flexural strength was 1.54 MPa and absolutely dry compressive strength was 2.52 MPa.

scholarly journals SS 316L/HA composite via powder injection moulding: Mechanical and physical properties

2019 ◽  
Vol 13 (3) ◽  
pp. 5480-5492
Author(s):  
N. A. Johari ◽  
F. R. M. Romlay ◽  
W. S. W. Harun
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Injection Moulding ◽  
Powder Injection ◽  
Stainless Steel 316L ◽  
Bony Tissue ◽  
Powder Injection Moulding ◽  
Mechanical And Physical Properties

The bio-active and biological affinity with bony tissue effect of hydroxyapatite (HA) marks as a chosen material for implants application. Uniting HA which has low mechanical properties that limit its application with a higher mechanical property of metallic biomaterial 316L stainless steel (316L) to form a biocomposite have been a solution to produce acceptable mechanical properties for human implant. The 316L/HA biocomposite would have attribute vital to current implant materials, like a low Young’s modulus, high compatibility, and bio-inertness. This study concentrates on investigating the mechanical and physical properties of the 316L/HA biocomposite fabricated by metal injection moulding. The synthesis HA was produced from calcium-Phosphate. While, Polypropylene (PP), Stearin Acid (SA) and primary binder, Paraffin wax (PW) used as a binder system. Different weight of HA (0, 5, 10 and 15 wt. %) ratios to SS 316L/HA were prepared. All samples were sintered at 1350 ºC for 2 hours soaking time. The result shows that 10 wt.% HA biocomposite and above have higher porosity and low mechanical strength. However, 5 wt.% HA biocomposite has a high relative density which 87.95% compared to other additive HA % and hardness 127.10 Hv. The Tensile strength and elongation of 316L/HA biocomposite exhibit decreased as the content of HA wt.% increase which similar properties with the human bone that lower than 130 MPa (tensile strength). Therefore, 5 wt.% HA biocomposite is found to be the most excellent powder ratio for 316L/HA biocomposite regarding mechanical and physical properties and to achieve the mechanical strength of the biocomposite is necessary an amount of HA content in the composite are smaller than 15 wt.%.  

Seashells as a natural model to study ceramic-polymer composites

1989 ◽  
Vol 47 ◽  
pp. 558-559
Author(s):  
Mehmet Sarikaya ◽  
Katie L. Gunnison ◽  
Ilhan A. Aksay
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Polymer Composites ◽  
Ceramic Composite ◽  
Good Combination ◽  
Nacreous Layer ◽  
Structure And Properties ◽  
Inorganic Component ◽  
Prismatic Layer ◽  
Abalone Shell

Interests in ceramic/polymer composites are increasing mainly because of their superior physical properties for structural and electronic applications. Naturally produced composites, such as seashells, are ideal to study the formation, microstructure, and physical properties of these composites as these materials have far superior properties with well-defined microstructures than man-made ones which require complex fabrication techniques. In this paper, a summary of a recent study on the microstructure of abalone shell (Haliotis refuscens) will be described in conjunction with its mechanical properties.A longitudinal cross-section of abalone shell displays two types of microstructures: outer prismatic layer and inner nacreous layer. Two forms of CaCO3, calcite (rhombohedral, ) and aragonite (orthorhombic, Pmcn) constitute the inorganic component of the organic/ceramic composite in the prismatic and nacreous layers, respectively. The structure and properties of the nacreous will be described here as this is the part which provides a good combination of mechanical properties for the seashell.

Cytocompatibility and Material Properties of Poly-carbonate Urethane/Carbon Nanofiber Composites for Neural Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanofibers ◽  
Material Properties ◽  
Carbon Nanofiber ◽  
Scar Tissue ◽  
Tissue Response ◽  
Positive Interactions ◽  
Weight Percentage ◽  
Poly Carbonate

AbstractCarbon nanofibers possess excellent conductivity properties, which may be beneficial in the design of more effective neural prostheses, however, limited evidence on their cytocompatibility properties exists. The objective of the present in vitro study was to determine cytocompatibility and material properties of formulations containing carbon nanofibers to predict the gliotic scar tissue response. Poly-carbonate urethane was combined with carbon nanofibers in varying weight percentages to provide a supportive matrix with beneficial bulk electrical and mechanical properties. The substrates were tested for mechanical properties and conductivity. Astrocytes (glial scar tissue-forming cells) were seeded onto the substrates for adhesion. Results provided the first evidence that astrocytes preferentially adhered to the composite material that contained the lowest weight percentage of carbon nanofibers. Positive interactions with neurons, and, at the same time, limited astrocyte functions leading to decreased gliotic scar tissue formation are essential for increased neuronal implant efficacy.

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

Structure and properties of compact articles from high-alloyed iron powder with adding of boron nitride

2020 ◽  
pp. 39-48
Author(s):  
B. O. Bolshakov ◽  
◽  
R. F. Galiakbarov ◽  
A. M. Smyslov ◽  
◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Boron Nitride ◽  
Grain Boundary ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Operating Conditions ◽  
Structure And Properties ◽  
Steam Turbines ◽  
Friction Forces ◽  
Wide Range

The results of the research of structure and properties of a composite compact from 13 Cr – 2 Мо and BN powders depending on the concentration of boron nitride are provided. It is shown that adding boron nitride in an amount of more than 2% by weight of the charge mixture leads to the formation of extended grain boundary porosity and finely dispersed BN layers in the structure, which provides a high level of wearing properties of the material. The effect of boron nitride concentration on physical and mechanical properties is determined. It was found that the introduction of a small amount of BN (up to 2 % by weight) into the compacts leads to an increase in plasticity, bending strength, and toughness by reducing the friction forces between the metal powder particles during pressing and a more complete grain boundary diffusion process during sintering. The formation of a regulated structure-phase composition of powder compacts of 13 Cr – 2 Mо – BN when the content of boron nitride changes in them allows us to provide the specified physical and mechanical properties in a wide range. The obtained results of studies of the physical and mechanical characteristics of the developed material allow us to reasonably choose the necessary composition of the powder compact for sealing structures of the flow part of steam turbines, depending on their operating conditions.

CONDULOY

Alloy Digest ◽  
1953 ◽  
Vol 2 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Hardening Heat Treatment

Abstract CONDULOY is a low beryllium-copper alloy containing about 1.5% nickel. It responds to age-hardening heat treatment for improved mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-11. Producer or source: Brush Beryllium Company.

ALUMINUM 2011

Alloy Digest ◽  
1978 ◽  
Vol 27 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Screw Machine ◽  
Aluminum Copper Alloy

Abstract ALUMINUM 2011 is an age-hardenable aluminum-copper alloy to which lead and bismuth are added to make it a free-machining alloy. It has good mechanical properties and was designed primarily for the manufacture of screw-machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-32. Producer or source: Various aluminum companies. Originally published October 1955, revised December 1978.

BRUSH ALLOY 3

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Corrosion Resistance

Abstract BRUSH Alloy 3 offers the highest electrical and thermal conductivity of any beryllium-copper alloy. It possesses an excellent combination of moderate strength, good corrosion resistance and good resistance to moderately elevated temperatures. Because of its unique physical and mechanical properties, Brush Alloy 3 finds widespread use in welding applications (RWMA Class 3), current-carrying springs, switch and instrument parts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-454. Producer or source: Brush Wellman Inc..

Sign in / Sign up

Export Citation Format

Share Document