scholarly journals Nonreciprocal terahertz beam steering based on magneto-optic metagratings

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Zhiyu Tan ◽  
Fei Fan ◽  
Xipu Dong ◽  
Jierong Cheng ◽  
Shengjiang Chang

AbstractIn this work, an active nonreciprocal THz beam steering has been proposed based on a transversely magnetized metal/InSb metagrating. The nonreciprocal dispersion relation and phase shift characteristics of the metal/InSb waveguide are investigated in details. A metagrating structure with gradient phase shift has been designed based on the metal/InSb waveguide. Under the external magnetic field (EMF), the THz beam can be changed among 0, +1st, and −1st order of the metagrating. Due to the nonreciprocity of the metal/InSb metagrating, the deflection angle can be controlled by changing the positive and negative directions of the EMF, to realize bilateral symmetric scanning from −67.8° to 67.8° with over 70% diffraction efficiency, and this device also exhibits the nonreciprocal one-way transmission as an isolator with the isolation of 13 dB. This low-loss, large deflection degree, nonreciprocal beam scanner has a great potential application in the THz regime.

2010 ◽  
Vol 168-169 ◽  
pp. 173-176
Author(s):  
S.A. Migachev ◽  
M.F. Sadykov ◽  
M.M. Shakirzyanov ◽  
D.A. Ivanov

In a trigonal easy-plane -Fe2O3 antiferromagnet magnetic-field-dependent conic refraction due to the renormalization of the coefficients of elasticity effective magnetoelastic interaction is experimentally found in addition to the conventional internal conic refraction of the transverse elastic waves propagating along the trigonal C3 axis. It is shown that the deflection angle () of the energy flow from the C3 axis upon the internal conic refraction does not depend on the value of the magnetic field applied in the basis plane (HC3) and is a constant value determined by the correlation of the C14 and C44 coefficients of elasticity. The deflection angle of the energy flow upon the antiferromagnetic conic refraction () increases with increase in the field and tends to the  value at large H values. The obtained results agree well with the theory of this phenomenon in antiferromagnets and support its conclusions.


Author(s):  
Ann-Kathrin Bodenstein ◽  
Matthias Lüpke ◽  
Christian Seiler ◽  
Frank Goblet ◽  
Stephan Nikolic ◽  
...  

Purpose The purpose of this study is to analyze the static magnetic field interactions for an ophthalmic-magnetic shunt implant with a ferromagnetic steel plate in a thin silicon layer. The plate is used for opening of a valve flap. Ten different sizes of this steel plate were investigated to characterize the relationship between the size of the metal and the magnetic forces of the static magnetic field of a 3.0 T MRI. Materials and Methods The magnetic translation force Fz was quantified by determining the deflection angle using the deflection angle test (ASTM F 2052). The torque was qualitatively estimated by using a 5-point grading scale (0: no torque; + 4: very strong torque) according to Sommer et al. 11. For the visual investigation of the function of the metal plate both prototypes were positioned at the magnetic field’s spatial gradient and at the magnet’s isocenter. The stitches were exposed to the thousandfold of the translational force by a dynamometer. Results The translational force was found to be 10 times greater than the weight of a single plate. The plates were exposed to a high torque (grade 3 to 4). The seams and the tissue withstood more than a thousandfold of the determined translational force. No spontaneous, uncontrolled opening of the valve flap was visible in the MRI, as a result of which the intraocular pressure could decrease considerably. Conclusion Due to the small size of the plates the translational force and the torque will be compensated by the silicon layer and also by the fixation in the eye. Key points:  Citation Format


2013 ◽  
Author(s):  
Jian-hua Zhou ◽  
Ling-jiang Kong ◽  
Feng Xiao ◽  
Jing-yi Zhuo ◽  
Xiao-bo Yang

2010 ◽  
Vol 130 (4) ◽  
pp. 107-112 ◽  
Author(s):  
Yoshiyuki Watanabe ◽  
Yutaka Abe ◽  
Shinnosuke Iwamatsu ◽  
Seiya Kobayashi ◽  
Yoshiyuki Takahashi ◽  
...  

2021 ◽  
pp. 014459872110102
Author(s):  
Lu Weiyong ◽  
He Changchun

To better evaluate the spatial steering effect of directional perforation hydraulic fractures, evaluation indexes for the spatial steering effect are first proposed in this paper. Then, these indexes are used to quantitatively evaluate existing physical experimental results. Finally, with the help of RFPA2D-Flow software, the influence of perforation length and azimuth on the spatial steering process of hydraulic fracture are quantitatively analysed using four evaluation indexes. It is shown by the results that the spatial deflection trajectory, deflection distance, deflection angle and initiation pressure of hydraulic fractures can be used as quantitative evaluation indexes for the spatial steering effect of hydraulic fractures. The deflection paths of directional perforation hydraulic fractures are basically the same. They all gradually deflect to the maximum horizontal principal stress direction from the perforation hole and finally represent a double-wing bending fracture. The deflection distance, deflection angle and initiation pressure of hydraulic fractures increase gradually with increasing perforation azimuth, and the sensitivity of the deflection angle to the perforation azimuth of hydraulic fractures also increases. With increasing perforation length, the deflection distance of hydraulic fractures increases gradually. However, the deflection angle and initiation pressure decrease gradually, as does the sensitivity.


Science ◽  
2019 ◽  
Vol 364 (6445) ◽  
pp. 1087-1090 ◽  
Author(s):  
Shi-Qiang Li ◽  
Xuewu Xu ◽  
Rasna Maruthiyodan Veetil ◽  
Vytautas Valuckas ◽  
Ramón Paniagua-Domínguez ◽  
...  

Rapidly developing augmented reality, solid-state light detection and ranging (LIDAR), and holographic display technologies require spatial light modulators (SLMs) with high resolution and viewing angle to satisfy increasing customer demands. Performance of currently available SLMs is limited by their large pixel sizes on the order of several micrometers. Here, we propose a concept of tunable dielectric metasurfaces modulated by liquid crystal, which can provide abrupt phase change, thus enabling pixel-size miniaturization. We present a metasurface-based transmissive SLM, configured to generate active beam steering with >35% efficiency and a large beam deflection angle of 11°. The high resolution and steering angle obtained provide opportunities to develop the next generation of LIDAR and display technologies.


1985 ◽  
Vol 33 (3) ◽  
pp. 387-423 ◽  
Author(s):  
John A. Davies ◽  
Ronald C. Davidson ◽  
George L. Johnston

This paper gives an extensive characterization of the range of validity of the Compton and Raman approximations to the exact free electron laser dispersion relation for a cold, relativistic electron beam propagating through a constantamplitude helical wiggler magnetic field. The electron beam is treated as infinite in transverse extent. Specific properties of the exact and approximate dispersion relations are investigated analytically and numerically. In particular, a detailed numerical analysis is carried out to determine the range of validity of the Compton approximation.


1999 ◽  
Vol 14 (30) ◽  
pp. 4819-4840
Author(s):  
JAN FISCHER ◽  
IVO VRKOČ

We discuss the current use of the operator-product expansion in QCD calculations. Treating the OPE as an expansion in inverse powers of an energy-squared variable (with possible exponential terms added), approximating the vacuum expectation value of the operator product by several terms and assuming a bound on the remainder along the Euclidean region, we observe how the bound varies with increasing deflection from the Euclidean ray down to the cut (Minkowski region). We argue that the assumption that the remainder is constant for all angles in the cut complex plane down to the Minkowski region is not justified. Making specific assumptions on the properties of the expanded function, we obtain bounds on the remainder in explicit form and show that they are very sensitive both to the deflection angle and to the class of functions considered. The results obtained are discussed in connection with calculations of the coupling constant αs from the τ decay.


2021 ◽  
Vol 34 (2) ◽  
pp. 183-192
Author(s):  
Mei Xiaochun

In general relativity, the values of constant terms in the equations of motions of planets and light have not been seriously discussed. Based on the Schwarzschild metric and the geodesic equations of the Riemann geometry, it is proved in this paper that the constant term in the time-dependent equation of motion of planet in general relativity must be equal to zero. Otherwise, when the correction term of general relativity is ignored, the resulting Newtonian gravity formula would change its basic form. Due to the absence of this constant term, the equation of motion cannot describe the elliptical and the hyperbolic orbital motions of celestial bodies in the solar gravitational field. It can only describe the parabolic orbital motion (with minor corrections). Therefore, it becomes meaningless to use general relativity calculating the precession of Mercury's perihelion. It is also proved that the time-dependent orbital equation of light in general relativity is contradictory to the time-independent equation of light. Using the time-independent orbital equation to do calculation, the deflection angle of light in the solar gravitational field is <mml:math display="inline"> <mml:mrow> <mml:mn>1.7</mml:mn> <mml:msup> <mml:mn>5</mml:mn> <mml:mo>″</mml:mo> </mml:msup> </mml:mrow> </mml:math> . But using the time-dependent equation to do calculation, the deflection angle of light is only a small correction of the prediction value <mml:math display="inline"> <mml:mrow> <mml:mn>0.87</mml:mn> <mml:msup> <mml:mn>5</mml:mn> <mml:mo>″</mml:mo> </mml:msup> </mml:mrow> </mml:math> of the Newtonian gravity theory with a magnitude order of <mml:math display="inline"> <mml:mrow> <mml:msup> <mml:mrow> <mml:mn>10</mml:mn> </mml:mrow> <mml:mrow> <mml:mo>−</mml:mo> <mml:mn>5</mml:mn> </mml:mrow> </mml:msup> </mml:mrow> </mml:math> . The reason causing this inconsistency was the Einstein's assumption that the motion of light satisfied the condition <mml:math display="inline"> <mml:mrow> <mml:mi>d</mml:mi> <mml:mi>s</mml:mi> <mml:mo>=</mml:mo> <mml:mn>0</mml:mn> </mml:mrow> </mml:math> in gravitational field. It leads to the absence of constant term in the time-independent equation of motion of light and destroys the uniqueness of geodesic in curved space-time. Meanwhile, light is subjected to repulsive forces in the gravitational field, rather than attractive forces. The direction of deflection of light is opposite, inconsistent with the predictions of present general relativity and the Newtonian theory of gravity. Observing on the earth surface, the wavelength of light emitted by the sun is violet shifted. This prediction is obviously not true. Practical observation is red shift. Finally, the practical significance of the calculation of the Mercury perihelion's precession and the existing problems of the light's deflection experiments of general relativity are briefly discussed. The conclusion of this paper is that general relativity cannot have consistence with the Newtonian theory of gravity for the descriptions of motions of planets and light in the solar system. The theory itself is not self-consistent too.


Sign in / Sign up

Export Citation Format

Share Document