scholarly journals Stainless steel weld metal enhanced with carbon nanotubes

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
D. J. A. Borges ◽  
D. C. S. Cardoso ◽  
E. M. Braga ◽  
A. A. F. Castro ◽  
M. A. L. Dos Reis ◽  
...  

Abstract This paper aims to establish the most indicated route to manufacture a nanostructured powder composed of 5 wt% Multi-walled Carbon Nanotubes and 304LSS powder. Four specimens were prepared using Mechanical Alloying and Chemical Treatment (CT) with Hydrogen Peroxide ($${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 ) as the main processes. A thermal treatment post-processing was used in half of the samples to remove the remaining amorphous carbon and to evaluate its effects. Regarding the powder analysis, attachment, amorphous carbon degree, crystallinity, and doping of the CNT throughout the metal matrix were investigated. The nanostructured powders were then inserted as a core in a 304LSS tubular rod to perform the arc welding process. The CT route eliminated the amorphous carbon and generated more refiner grains, which provided a cross-section hardness gain of more than 40% regarding the 304LSS joint. In summary, the CT route, combined with the GTAW process, provided a new method for nanocomposite manufacturing by combining shorter preparation steps, obtaining an improvement in the microstructural and hardness performance.

Carbon ◽  
2004 ◽  
Vol 42 (10) ◽  
pp. 1953-1957 ◽  
Author(s):  
R.F Klie ◽  
D Ciuparu ◽  
L Pfefferle ◽  
Y Zhu

PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e8634 ◽  
Author(s):  
Gladys Juárez-Cisneros ◽  
Mariela Gómez-Romero ◽  
Homero Reyes de la Cruz ◽  
Jesús Campos-García ◽  
Javier Villegas

Background Multi-walled carbon nanotubes (MWCNTs) are nanoparticles with countless applications. MWCNTs are typically of synthetic origin. However, recently, the formation of MWCNTs in nature after forest fires has been documented. Previous reports have demonstrated the positive effects of synthetic MWCNTs on the germination and development of species of agronomic interest; nevertheless, there is practically no information on how synthetic or natural MWCNTs affect forest plant development. In this report, based on insights from dose-response assays, we elucidate the comparative effects of synthetic MWCNTs, amorphous carbon, and natural MWCNTs obtained after a forest fire on Eysenhardtia polystachya plant. Methods E. polystachya seeds were sown in peat moss-agrolite substrate and conserved in a shade house. Germination was recorded daily up to 17 days after sowing, and plant development (manifested in shoot and root length, stem diameter, foliar area, and root architecture parameters) was recorded 60 days after sowing. Results The treatments with natural MWCNTs accelerated the emergence and improved the germination of this plant, thus while untreated seeds achieve 100% of germination within 16th day, seeds supplemented with natural MWCNTs at doses of 20 µg/mL achieve the above percentage within the 4th day. Natural MWCNTs also promoted fresh and dry biomass in all applied treatments, specially at doses of 40 µg/mL where natural MWCNTs significantly promoted leaf number, root growth, and the dry and fresh weights of shoots and roots of seedlings. Seeds supplemented with doses between 20 and 40 µg/mL of amorphous carbon achieving 100% of germination within the 6th day; however, seeds supplemented either with doses of 60 µg/mL of the above carbon or with synthetic MWCNTs at all the tested concentrations could achieve at most 80 % and 70% of germination respectively within the 17 days. Finally, neither treatments added with amorphous carbon nor those added with synthetic MWCNTs, showed significant increases in the fresh and dry biomass of the tested plant. Likewise, the survival of seedlings was reduced between 10 and 20 % with 40 and 60 µg/mL of amorphous carbon, and with synthetic MWCNTs in all the doses applied was reduced at 30% of survival plants. Conclusions These findings indicate that MWCNTs produced by wildfire act as plant growth promoters, contributing to the germination and development of adapted to fire-prone conditions species such as E. polystachya.


Acta Naturae ◽  
2011 ◽  
Vol 3 (1) ◽  
pp. 99-106 ◽  
Author(s):  
E A Smirnova ◽  
A A Gusev ◽  
O N Zaitseva ◽  
E M Lazareva ◽  
G E Onishchenko ◽  
...  

2003 ◽  
Vol 772 ◽  
Author(s):  
T. Seeger ◽  
G. de la Fuente ◽  
W.K. Maser ◽  
A.M. Benito ◽  
A. Righi ◽  
...  

AbstractCarbon nanotubes (CNT) are interesting candidates for the reinforcement in robust composites and for conducting fillers in polymers due to their fascinating electronic and mechanical properties. For the first time, we report the incorporation of multi walled carbon nanotubes (MWNTs) into silica-glass surfaces by means of partial surface-melting caused by a continuous wave Nd:YAG laser. MWNTs were detected being well incorporated in the silica-surface. The composites are characterized using scanning electron microscopy (SEM) and Raman-spectroscopy. A model for the composite-formation is proposed based on heatabsorption by MWNTs and a partial melting of the silica-surface.


Sign in / Sign up

Export Citation Format

Share Document