scholarly journals Soret–Dufour impact on a three-dimensional Casson nanofluid flow with dust particles and variable characteristics in a permeable media

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Naila Shaheen ◽  
Muhammad Ramzan ◽  
Ahmed Alshehri ◽  
Zahir Shah ◽  
Poom Kumam
Keyword(s):  
Activation Energy ◽  
Particle Interaction ◽  
Three Dimensional ◽  
Concentration Field ◽  
Fluid Particle ◽  
Dust Particles ◽  
Force Coefficient ◽  
Nanofluid Flow ◽  
Heat Condition ◽  
Casson Nanofluid

AbstractIn this study, the effects of variable characteristics are analyzed on a three-dimensional (3D) dusty Casson nanofluid flow past a deformable bidirectional surface amalgamated with chemical reaction and Arrhenius activation energy. The surface is deformable in the direction of the x-axis and y-axis. The motion of the flow is induced due to the deformation of the surface. The impression of Soret and Dufour's effects boost the transmission of heat and mass. The flow is analyzed numerically with the combined impacts of thermal radiation, momentum slip, and convective heat condition. A numerical solution for the system of the differential equations is attained by employing the bvp4c function in MATLAB. The dimensionless parameters are graphically illustrated and discussed for the involved profiles. It is perceived that on escalating the Casson fluid and porosity parameters, the velocity field declines for fluid-particle suspension. Also, for augmented activation energy and Soret number, the concentration field enhances. An opposite behavior is noticed in the thermal field for fluctuation in fluid-particle interaction parameters for fluid and dust phase. Drag force coefficient increases on escalating porosity parameter and Hartmann number. On amplifying the radiation parameter heat and mass flux augments. A comparative analysis of the present investigation with an already published work is also added to substantiate the envisioned problem.

scholarly journals Thermal Analysis of 3D Electromagnetic Radiative Nanofluid Flow with Suction/Blowing: Darcy–Forchheimer Scheme

Micromachines ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1395
Author(s):  
Hammad Alotaibi ◽  
Mohamed R. Eid
Keyword(s):  
Activation Energy ◽  
Differential Equations ◽  
Melt Spinning ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Brownian Diffusion ◽  
Force Coefficient ◽  
Catalytic Reactors ◽  
Nanofluid Flow ◽  
The Impact

This paper discusses the Darcy–Forchheimer three dimensional (3D) flow of a permeable nanofluid through a convectively heated porous extending surface under the influences of the magnetic field and nonlinear radiation. The higher-order chemical reactions with activation energy and heat source (sink) impacts are considered. We integrate the nanofluid model by using Brownian diffusion and thermophoresis. To convert PDEs (partial differential equations) into non-linear ODEs (ordinary differential equations), an effective, self-similar transformation is used. With the fourth–fifth order Runge–Kutta–Fehlberg (RKF45) approach using the shooting technique, the consequent differential system set is numerically solved. The influence of dimensionless parameters on velocity, temperature, and nanoparticle volume fraction profiles is revealed via graphs. Results of nanofluid flow and heat as well as the convective heat transport coefficient, drag force coefficient, and Nusselt and Sherwood numbers under the impact of the studied parameters are discussed and presented through graphs and tables. Numerical simulations show that the increment in activation energy and the order of the chemical reaction boosts the concentration, and the reverse happens with thermal radiation. Applications of such attractive nanofluids include plastic and rubber sheet production, oil production, metalworking processes such as hot rolling, water in reservoirs, melt spinning as a metal forming technique, elastic polymer substances, heat exchangers, emollient production, paints, catalytic reactors, and glass fiber production.

scholarly journals Computational Study on Three-Dimensional Convective Casson Nanofluid Flow past a Stretching Sheet with Arrhenius Activation Energy and Exponential Heat Source Effects

Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
P. Ragupathi ◽  
S. Saranya ◽  
H.V.R. Mittal ◽  
Qasem M. Al-Mdallal
Keyword(s):  
Activation Energy ◽  
Differential Equations ◽  
Heat Source ◽  
Stretching Sheet ◽  
Three Dimensional ◽  
Arrhenius Activation Energy ◽  
Nanofluid Flow ◽  
Casson Nanofluid ◽  
Source Effects ◽  
Bio Engineering

The effective applications of Casson fluid in drilling processes, biological treatments, food processing, and bio-engineering activities have caught the interest of a wide range of researchers. The suitable knowledge of heat transfer via non-Newtonian fluid is essential for the achievement of best quality products in industry. Thus, the three-dimensional Casson nanofluid flow over a stretching sheet with Arrhenius activation energy and exponential heat source effects is investigated in this paper using a computational process based on iterative power series (IPS) method. To provide useful insights into the physical and dynamic examinations of this topic, convective heat and convective mass boundary conditions are used. The developed model of nonlinear partial differential equations (PDEs) has been transformed into ordinary differential equations (ODEs) using similarity transformations. The numerical solution of the transformed ODEs is obtained by employing the IPS technique combined with shooting iteration approach. The results of this study are validated with the previous studies, and excellent agreements have been obtained. The behavior of various capable physical parameters is analyzed. It is observed that the thermal and concentration fields show an enhancement with respect to the exponential heat source parameter and thermal and concentration Biot numbers. Further, the Arrhenius activation energy parameter has shown a significant effect on the concentration field.

scholarly journals A generalized perspective of Fourier and Fick’s laws: Magnetized effects of Cattaneo-Christov models on transient nanofluid flow between two parallel plates with Brownian motion and thermophoresis

2020 ◽  
Vol 9 (1) ◽  
pp. 201-222 ◽  
Author(s):  
Usha Shankar ◽  
Neminath B. Naduvinamani ◽  
Hussain Basha
Keyword(s):  
Brownian Motion ◽  
Joule Heating ◽  
Concentration Field ◽  
Double Diffusion ◽  
Diffusion Models ◽  
Time Dependent ◽  
Parallel Plates ◽  
Nanofluid Flow ◽  
Casson Nanofluid ◽  
Highly Nonlinear

AbstractPresent research article reports the magnetized impacts of Cattaneo-Christov double diffusion models on heat and mass transfer behaviour of viscous incompressible, time-dependent, two-dimensional Casson nanofluid flow through the channel with Joule heating and viscous dissipation effects numerically. The classical transport models such as Fourier and Fick’s laws of heat and mass diffusions are generalized in terms of Cattaneo-Christov double diffusion models by accounting the thermal and concentration relaxation times. The present physical problem is examined in the presence of Lorentz forces to investigate the effects of magnetic field on double diffusion process along with Joule heating. The non-Newtonian Casson nanofluid flow between two parallel plates gives the system of time-dependent, highly nonlinear, coupled partial differential equations and is solved by utilizing RK-SM and bvp4c schemes. Present results show that, the temperature and concentration distributions are fewer in case of Cattaneo-Christov heat and mass flux models when compared to the Fourier’s and Fick’s laws of heat and mass diffusions. The concentration field is a diminishing function of thermophoresis parameter and it is an increasing function of Brownian motion parameter. Finally, an excellent comparison between the present solutions and previously published results show the accuracy of the results and methods used to achieve the objective of the present work.

scholarly journals Significance of Thermal Slip and Convective Boundary Conditions in Three Dimensional Rotating Darcy-Forchheimer Nanofluid Flow

Symmetry ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 741 ◽  
Author(s):  
Anum Shafiq ◽  
Ghulam Rasool ◽  
Chaudry Masood Khalique
Keyword(s):  
Activation Energy ◽  
Boundary Conditions ◽  
Skin Friction ◽  
Three Dimensional ◽  
Brownian Diffusion ◽  
Thermal Slip ◽  
Convective Boundary Conditions ◽  
Nanofluid Flow ◽  
Convective Boundary ◽  
Forchheimer Number

This article is concerned with the nanofluid flow in a rotating frame under the simultaneous effects of thermal slip and convective boundary conditions. Arrhenius activation energy is another important aspect of the present study. Flow phenomena solely rely on the Darcy–Forchheimer-type porous medium in three-dimensional space to tackle the symmetric behavior of viscous terms. The stretching sheet is assumed to drive the fluid. Buongiorno’s model is adopted to see the features of Brownian diffusion and thermophoresis on the basis of symmetry fundamentals. Governing equations are modeled and transformed into ordinary differential equations by suitable transformations. Solutions are obtained through the numerical RK45-scheme, reporting the important findings graphically. The outputs indicate that larger values of stretching reduce the fluid velocity. Both the axial and transverse velocity fields undergo much decline due to strong retardation produced by the Forchheimer number. The thermal radiation parameter greatly raises the thermal state of the field. The temperature field rises for a stronger reaction within the fluid flow, however reducing for an intensive quantity of activation energy. A declination in the concentration profile is noticed for stronger thermophoresis. The Forchheimer number and porosity factors result in the enhancement of the skin friction, while both slip parameters result in a decline of skin friction. The thermal slip factor results in decreasing both the heat and mass flux rates. The study is important in various industrial applications of nanofluids including the electro-chemical industry, the polymer industry, geophysical setups, geothermal setups, catalytic reactors, and many others.

Sign in / Sign up

Export Citation Format

Share Document