scholarly journals Analysis of a novel X-ray lens for converging beam radiotherapy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Dirk A. Bartkoski ◽  
Aharon Bar-David ◽  
Michael Kleckner ◽  
Dragan Mirkovic ◽  
Ramesh Tailor ◽  
...  
Keyword(s):  
Focal Spot ◽  
Treatment Approach ◽  
Target Volume ◽  
Optimal Placement ◽  
Radiation Beam ◽  
Dose Distributions ◽  
X Ray ◽  
Radiation Delivery ◽  
Novel Approach ◽  
Physical Principles

AbstractWe describe the development and analysis of a new teletherapy modality that, through a novel approach to targeted radiation delivery, has the potential to provide greater conformality than conventional photon-based treatments. The proposed system uses an X-ray lens to reflect photons from a conventional X-ray tube toward a focal spot. The resulting dose distributions have a highly localized peak dose, with lower doses in the converging radiation cone. Physical principles governing the design of this system are presented, along with a series of measurements analyzing various characteristics of the converging beam. The beam was designed to be nearly monoenergetic (~ 59 keV), with an energy bandwidth of approximately 10 keV allowing for treatment energies lower than conventional therapies. The focal spot was measured to be approximately 2.5 cm long and 4 mm wide. Mounting the proposed X-ray delivery system on a robotic arm would allow sub-millimeter accuracy in focal spot positioning, resulting in highly conformal dose distribution via the optimal placement of individual focal spots within the target volume. Aspects of this novel radiation beam are discussed considering their possible clinical application as a treatment approach that takes maximum advantage of the unique properties afforded by converging X-ray beam therapy.

The determination of the focal spot size of an X-ray tube from the radiation beam profile

2015 ◽  
Vol 82 ◽  
pp. 138-145 ◽  
Author(s):  
A.D. Oliveira ◽  
M.J. Fartaria ◽  
J. Cardoso ◽  
L.M. Santos ◽  
C. Oliveira ◽  
...  
Keyword(s):  
Focal Spot ◽  
Spot Size ◽  
Beam Profile ◽  
Focal Spot Size ◽  
Radiation Beam ◽  
X Ray

X-Ray Analysis of Frozen Hydrated Sections:The Unconventional Approach

1982 ◽  
Vol 40 ◽  
pp. 754-757
Author(s):  
R. Beeuwkes ◽  
A. Saubermann ◽  
P. Echlin ◽  
S. Churchill
Keyword(s):  
Ratio Method ◽  
Frozen Sections ◽  
Technical Problems ◽  
Sample Handling ◽  
X Ray ◽  
Common Group ◽  
Ideal Method ◽  
Classic Paper ◽  
Physical Principles ◽  
The Ideal

Fifteen years ago, Hall described clearly the advantages of the thin section approach to biological x-ray microanalysis, and described clearly the ratio method for quantitive analysis in such preparations. In this now classic paper, he also made it clear that the ideal method of sample preparation would involve only freezing and sectioning at low temperature. Subsequently, Hall and his coworkers, as well as others, have applied themselves to the task of direct x-ray microanalysis of frozen sections. To achieve this goal, different methodological approachs have been developed as different groups sought solutions to a common group of technical problems. This report describes some of these problems and indicates the specific approaches and procedures developed by our group in order to overcome them. We acknowledge that the techniques evolved by our group are quite different from earlier approaches to cryomicrotomy and sample handling, hence the title of our paper. However, such departures from tradition have been based upon our attempt to apply basic physical principles to the processes involved. We feel we have demonstrated that such a break with tradition has valuable consequences.

The Basic Physical Principles of Ion, Electron, and X-Ray Detectors and Their Application to Microanalysis

1985 ◽  
Vol 43 ◽  
pp. 154-157
Author(s):  
A.J. Tousimis
Keyword(s):  
Ion Beam ◽  
Depth Resolution ◽  
Sample Surface ◽  
High Energy ◽  
X Rays ◽  
X Ray ◽  
Electrons And Ions ◽  
Spatial Depth ◽  
Minimum Surface Area ◽  
Physical Principles

An integral and of prime importance of any microtopography and microanalysis instrument system is its electron, x-ray and ion detector(s). The resolution and sensitivity of the electron microscope (TEM, SEM, STEM) and microanalyzers (SIMS and electron probe x-ray microanalyzers) are closely related to those of the sensing and recording devices incorporated with them.Table I lists characteristic sensitivities, minimum surface area and depth analyzed by various methods. Smaller ion, electron and x-ray beam diameters than those listed, are possible with currently available electromagnetic or electrostatic columns. Therefore, improvements in sensitivity and spatial/depth resolution of microanalysis will follow that of the detectors. In most of these methods, the sample surface is subjected to a stationary, line or raster scanning photon, electron or ion beam. The resultant radiation: photons (low energy) or high energy (x-rays), electrons and ions are detected and analyzed.

XRMF applications of a monolithic, polycapillary, focusing x-ray optic

1996 ◽  
Vol 54 ◽  
pp. 240-241
Author(s):  
D. A. Carpenter ◽  
Ning Gao ◽  
G. J. Havrilla
Keyword(s):  
Trace Elements ◽  
Point Source ◽  
Focal Spot ◽  
Fluorescence Analysis ◽  
X Rays ◽  
Focal Distance ◽  
Spot Diameter ◽  
X Ray ◽  
Focal Spot Diameter

A monolithic, polycapillary, x-ray optic was adapted to a laboratory-based x-ray microprobe to evaluate the potential of the optic for x-ray micro fluorescence analysis. The polycapillary was capable of collecting x-rays over a 6 degree angle from a point source and focusing them to a spot approximately 40 µm diameter. The high intensities expected from this capillary should be useful for determining and mapping minor to trace elements in materials. Fig. 1 shows a sketch of the capillary with important dimensions.The microprobe had previously been used with straight and with tapered monocapillaries. Alignment of the monocapillaries with the focal spot was accomplished by electromagnetically scanning the focal spot over the beveled anode. With the polycapillary it was also necessary to manually adjust the distance between the focal spot and the polycapillary.The focal distance and focal spot diameter of the polycapillary were determined from a series of edge scans.

Acalypha Indica mediated MgO NPs: A novel approach in greener route with its antibacterial activity against pathogens

2020 ◽  
Vol 3 (2) ◽  
Author(s):  
Kavipriya K C ◽  
Sudha A P ◽  
Sujatha K ◽  
Sowmya Lakshmi K
Keyword(s):  
Antibacterial Activity ◽  
Metal Oxides ◽  
Bacterial Species ◽  
Magnesium Nitrate ◽  
Precipitation Method ◽  
Average Crystalline Size ◽  
Face Centered Cubic ◽  
X Ray ◽  
Novel Approach ◽  
Acalypha Indica

The interest in miniaturization of particles revealed the hidden applications of metal oxides. The potential applications of the particles may vary when the size of the particle is reduced. One of the alternative routes to the conventional approach is the use of plant extract for the synthesis of metal oxides NPs. In the framework of this study, the ecofriendly MgO nanoparticles were synthesized using Acalypha Indica leaf extract,functioning as reducing and capping agent by co-precipitation method. The predecessor taken here was Magnesium Nitrate. The biologically synthesized MgO NPs were characterized by various techniques like X ray diffraction(XRD), Fourier Transform infrared spectroscopy(FTIR), Scanning electron microscope (SEM) with Energy Dispersive X-ray spectroscopy(EDX) profile and its antibacterial activity is evaluated against causative organisms. XRD studies confirmed the face centered cubic crystalline structure of MgO NPs and the average crystalline size of MgO NPs calculated using Scherer’s formula was found to be 13 nm. FTIR spectrum shows a significant Mg-O vibrational band. Purity, surface morphology and chemical composition of elements were confirmed by SEM with EDX. The SEM result shows the fine spherical morphology with the grain size range between 43nm to 62nm. Antimicrobial assay of MgO NPs was examined against gram positive and negative bacteria. Appreciated activity was observed on the Staphylococcus aureus bacterial species. In general, the renewed attempt of this facile approach gave the optimum results of multifunctional MgO NPs.

A Novel Approach to Study Biscuits and Breadsticks Using X-Ray Computed Tomography

2010 ◽  
Vol 75 (6) ◽  
pp. E353-E358 ◽  
Author(s):  
P. Frisullo ◽  
A. Conte ◽  
M.A. Del Nobile
Keyword(s):  
Computed Tomography ◽  
X Ray ◽  
Novel Approach ◽  
X Ray Computed

scholarly journals Multiscale Copper-µDiamond Nanostructured Composites

2012 ◽  
Vol 730-732 ◽  
pp. 925-930
Author(s):  
Daniela Nunes ◽  
Vanessa Livramento ◽  
Horácio Fernandes ◽  
Carlos Silva ◽  
Nobumitsu Shohoji ◽  
...  
Keyword(s):  
Pure Copper ◽  
Thermal Stabilization ◽  
Hot Extrusion ◽  
Processing Parameters ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Optimal Processing ◽  
Novel Approach ◽  
Transmission Electron

Nanostructured copper-diamond composites can be tailored for thermal management applications at high temperature. A novel approach based on multiscale diamond dispersions is proposed for the production of this type of materials: a Cu-nDiamond composite produced by high-energy milling is used as a nanostructured matrix for further dispersion of micrometer sized diamond. The former offers strength and microstructural thermal stability while the latter provides high thermal conductivity. A series of Cu-nDiamond mixtures have been milled to define the minimum nanodiamond fraction suitable for matrix refinement and thermal stabilization. A refined matrix with homogenously dispersed nanoparticles could be obtained with 4 at.% nanodiamond for posterior mixture with mDiamond and subsequent consolidation. In order to define optimal processing parameters, consolidation by hot extrusion has been carried out for a Cu-nDiamond composite and, in parallel, for a mixture of pure copper and mDiamond. The materials produced were characterized by X-ray diffraction, scanning and transmission electron microscopy and microhardness measurements.

Sign in / Sign up

Export Citation Format

Share Document