scholarly journals Tandem-structured, hot electron based photovoltaic cell with double Schottky barriers

2014 ◽  
Vol 4 (1) ◽  
Author(s):  
Young Keun Lee ◽  
Hyosun Lee ◽  
Jeong Young Park
1977 ◽  
Vol 55 (13) ◽  
pp. 1145-1149 ◽  
Author(s):  
P. Rochon ◽  
E. Fortin ◽  
J. C. Woolley

The effect of temperature on the magnitude of the photovoltage ofa Au–InSb Schottky barrier is investigated in the range 60–250 K. Analysis of the variation of photo voltage with temperature shows that the barrier height [Formula: see text], which for Au–InSb is mostly determined by interface states, varies slowly with temperature. A model, taking into account the temperature dependence of the different components of the photovoltaic cell, is developed to explain the rapid increase in photovoltage with decreasing temperature, and its predictions are tested against experimental results.


1979 ◽  
Vol 16 (5) ◽  
pp. 1394-1397 ◽  
Author(s):  
J. S. Escher ◽  
P. E. Gregory ◽  
T. J. Maloney

1998 ◽  
Vol 08 (PR3) ◽  
pp. Pr3-233-Pr3-236
Author(s):  
M. Frericks ◽  
H. F.C. Hoevers ◽  
P. de Groene ◽  
W. A. Mels ◽  
P. A.J. de Korte

1977 ◽  
Vol 38 (11) ◽  
pp. 1443-1448 ◽  
Author(s):  
G. Sarrabayrouse ◽  
J. Buxo ◽  
D. Esteve

Author(s):  
Theodoros Tsoulos ◽  
Supriya Atta ◽  
Maureen Lagos ◽  
Michael Beetz ◽  
Philip Batson ◽  
...  

<div>Gold nanostars display exceptional field enhancement properties and tunable resonant modes that can be leveraged to create effective imaging tags or phototherapeutic agents, or to design novel hot-electron based photocatalysts. From a fundamental standpoint, they represent important tunable platforms to study the dependence of hot carrier energy and dynamics on plasmon band intensity and position. Toward the realization of these platforms, holistic approaches taking into account both theory and experiments to study the fundamental behavior of these</div><div>particles are needed. Arguably, the intrinsic difficulties underlying this goal stem from the inability to rationally design and effectively synthesize nanoparticles that are sufficiently monodispersed to be employed for corroborations of the theoretical results without the need of single particle experiments. Herein, we report on our concerted computational and experimental effort to design, synthesize, and explain the origin and morphology-dependence of the plasmon modes of a novel gold nanostar system, with an approach that builds upon the well-known plasmon hybridization model. We have synthesized monodispersed samples of gold nanostars with finely tunable morphology employing seed-mediated colloidal protocols, and experimentally observed narrow and spectrally resolved harmonics of the primary surface plasmon resonance mode both at the single particle level (via electron energy loss spectroscopy) and in ensemble (by UV-Vis and ATR-FTIR spectroscopies). Computational results on complex anisotropic gold nanostructures are validated experimentally on samples prepared colloidally, underscoring their importance as ideal testbeds for the study of structure-property relationships in colloidal nanostructures of high structural complexity.</div>


Author(s):  
Jim Vickers ◽  
Nader Pakdaman ◽  
Steven Kasapi

Abstract Dynamic hot-electron emission using time-resolved photon counting can address the long-term failure analysis and debug requirements of the semiconductor industry's advanced devices. This article identifies the detector performance parameters and components that are required to scale and keep pace with the industry's requirements. It addresses the scalability of dynamic emission with the semiconductor advanced device roadmap. It is important to understand the limitations to determining that a switching event has occurred. The article explains the criteria for event detection, which is suitable for tracking signal propagation and looking for logic or other faults in which timing is not critical. It discusses conditions for event timing, whose goal is to determine accurately when a switching event has occurred, usually for speed path analysis. One of the uses of a dynamic emission system is to identify faults by studying the emission as a general function of time.


Author(s):  
U. Kerst ◽  
P. Sadewater ◽  
R. Schlangen ◽  
C. Boit ◽  
R. Leihkauf ◽  
...  

Abstract The feasibility of low-ohmic FIB contacts to silicon with a localized silicidation was presented at ISTFA 2004 [1]. We have systematically explored options in contacting diffusions with FIB metal depositions directly. A demonstration of a 200nm x 200nm contact on source/drain diffusion level is given. The remaining article focuses on the properties of FIB deposited contacts on differently doped n-type Silicon. After the ion beam assisted platinum deposition a silicide was formed using a forming current in two configurations. The electrical properties of the contacts are compared to furnace anneal standards. Parameters of Schottky-barriers and thermal effects of the formation current are studied with numerical simulation. TEM images and material analysis of the low ohmic contacts show a Pt-silicide formed on a silicon surface with no visible defects. The findings indicate which process parameters need a more detailed investigation in order to establish values for a practical process.


Sign in / Sign up

Export Citation Format

Share Document