Human stress monitoring through an organic cotton-fiber biosensor

2014 ◽  
Vol 2 (34) ◽  
pp. 5620-5626 ◽  
Author(s):  
Nicola Coppedè ◽  
Giuseppe Tarabella ◽  
Marco Villani ◽  
Davide Calestani ◽  
Salvatore Iannotta ◽  
...  
Keyword(s):  
Cotton Fiber ◽  
Low Cost ◽  
Selective Detection ◽  
Crucial Importance ◽  
Stress Monitoring ◽  
Non Invasive ◽  
Organic Cotton ◽  
Human Stress

Selective detection of bioanalytes in physiological fluids, such as blood, sweat or saliva, by means of low-cost and non-invasive devices, is of crucial importance to improve diagnosis and prevention in healthcare.

scholarly journals The grades and freshness assessment of eggs based on density detection using machine vision and weighing sensor

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Supakorn Harnsoongnoen ◽  
Nuananong Jaroensuk
Keyword(s):  
Machine Vision ◽  
Vision System ◽  
Low Cost ◽  
Measuring System ◽  
Coefficient Of Determination ◽  
Water Displacement ◽  
Non Invasive ◽  
Future Potential ◽  
Non Destructive ◽  
Egg Freshness

AbstractThe water displacement and flotation are two of the most accurate and rapid methods for grading and assessing freshness of agricultural products based on density determination. However, these techniques are still not suitable for use in agricultural inspections of products such as eggs that absorb water which can be considered intrusive or destructive and can affect the result of measurements. Here we present a novel proposal for a method of non-destructive, non-invasive, low cost, simple and real—time monitoring of the grading and freshness assessment of eggs based on density detection using machine vision and a weighing sensor. This is the first proposal that divides egg freshness into intervals through density measurements. The machine vision system was developed for the measurement of external physical characteristics (length and breadth) of eggs for evaluating their volume. The weighing system was developed for the measurement of the weight of the egg. Egg weight and volume were used to calculate density for grading and egg freshness assessment. The proposed system could measure the weight, volume and density with an accuracy of 99.88%, 98.26% and 99.02%, respectively. The results showed that the weight and freshness of eggs stored at room temperature decreased with storage time. The relationship between density and percentage of freshness was linear for the all sizes of eggs, the coefficient of determination (R2) of 0.9982, 0.9999, 0.9996, 0.9996 and 0.9994 for classified egg size classified 0, 1, 2, 3 and 4, respectively. This study shows that egg freshness can be determined through density without using water to test for water displacement or egg flotation which has future potential as a measuring system important for the poultry industry.

Anthraquinone-Decorated Graphene Hydrogel based on Carbonized Cotton Fiber for Flexible and High Performance Supercapacitors

2021 ◽  
Author(s):  
Mengying Jia ◽  
Yue Li ◽  
Linlin Cui ◽  
Yingrui An ◽  
Canping Pan ◽  
...  
Keyword(s):  
Cotton Fiber ◽  
High Performance ◽  
Low Cost ◽  
Cellulose Fibers

Recently, wood-derived electrochemical materials like cellulose fibers have attracted increased attention as they have unique characteristics, such as low cost, lightweight, earth-abundance, flexible and sustainable. Here, based on carbonized cotton...

A ratiometric colorimetric detection of the folate receptor based on terminal protection of small-molecule-linked DNA

The Analyst ◽  
2015 ◽  
Vol 140 (4) ◽  
pp. 1260-1264 ◽  
Author(s):  
Yanhong Zhu ◽  
Guangfeng Wang ◽  
Liang Sha ◽  
Yuwei Qiu ◽  
Hong Jiang ◽  
...  
Keyword(s):  
Small Molecule ◽  
Crucial Role ◽  
Folate Receptor ◽  
Low Cost ◽  
Colorimetric Detection ◽  
Cancer Therapeutics ◽  
Selective Detection

Development of strategies for the sensitive and selective detection of the folate receptor (FR) that are simple and low cost is of great importance for assessing cancer therapeutics due to its crucial role in physiological, pharmacological and pathological processes.

Micromolding Fabrication of Biocompatible Dry Micro-Pyramid Array Electrodes for Wearable Biopotential Monitoring

2021 ◽  
Author(s):  
Marco Vinicio Alban ◽  
Haechang Lee ◽  
Hanul Moon ◽  
Seunghyup Yoo
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Skin Irritation ◽  
Electrode Impedance ◽  
Non Invasive ◽  
Solution Processes ◽  
Dry Electrodes ◽  
Array Electrode ◽  
Low Cost Manufacturing ◽  
Electromyography Signals

Abstract Thin dry electrodes are promising components in wearable healthcare devices. Assessing the condition of the human body by monitoring biopotentials facilitates the early diagnosis of diseases as well as their prevention, treatment, and therapy. Existing clinical-use electrodes have limited wearable-device usage because they use gels, require preparation steps, and are uncomfortable to wear. While dry electrodes can improve these issues and have demonstrated performance on par with gel-based electrodes, providing advantages in mobile and wearable applications; the materials and fabrication methods used are not yet at the level of disposable gel electrodes for low-cost mass manufacturing and wide adoption. Here, a low-cost manufacturing process for thin dry electrodes with a conductive micro-pyramidal array is presented for large-scale on-skin wearable applications. The electrode is fabricated using micromolding techniques in conjunction with solution processes in order to guarantee ease of fabrication, high device yield, and the possibility of mass production compatible with current semiconductor production processes. Fabricated using a conductive paste and an epoxy resin that are both biocompatible, the developed micro-pyramidal array electrode operates in a conformal, non-invasive manner, with low skin irritation, which ensures improved comfort for brief or extended use. The operation of the developed electrode was examined by analyzing electrode-skin-electrode impedance, electroencephalography, electrocardiography, and electromyography signals and comparing them with those measured simultaneously using gel electrodes.

Non-invasive intelligent monitoring system for fault detection in induction motor based on bio piezoelectric sensor using ANN

2022 ◽  
Author(s):  
Massine GANA ◽  
Hakim ACHOUR ◽  
Kamel BELAID ◽  
Zakia CHELLI ◽  
Mourad LAGHROUCHE ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Induction Motor ◽  
Vibration Analysis ◽  
Low Cost ◽  
Piezoelectric Sensor ◽  
Integrated System ◽  
Easy Access ◽  
Non Invasive ◽  
Artificial Neural

Abstract This paper presents a design of a low-cost integrated system for the preventive detection of unbalance faults in an induction motor. In this regard, two non-invasive measurements have been collected then monitored in real time and transmitted via an ESP32 board. A new bio-flexible piezoelectric sensor developed previously in our laboratory, was used for vibration analysis. Moreover an infrared thermopile was used for non-contact temperature measurement. The data is transmitted via Wi-Fi to a monitoring station that intervenes to detect an anomaly. The diagnosis of the motor condition is realized using an artificial neural network algorithm implemented on the microcontroller. Besides, a Kalman filter is employed to predict the vibrations while eliminating the noise. The combination of vibration analysis, thermal signature analysis and artificial neural network provides a better diagnosis. It ensures efficiency, accuracy, easy access to data and remote control, which significantly reduces human intervention.

Naturally Colored Organic Cotton and Naturally Colored Cotton Fiber Production

2018 ◽  
pp. 81-99
Author(s):  
Gizem Karakan Günaydin ◽  
Ozan Avinc ◽  
Sema Palamutcu ◽  
Arzu Yavas ◽  
Ali Serkan Soydan
Keyword(s):  
Cotton Fiber ◽  
Fiber Production ◽  
Organic Cotton ◽  
Colored Cotton ◽  
Naturally Colored Cotton

scholarly journals Method for auxiliary use of thermography in diagnosing inflammation in the coxofemoral joint in dogs

2018 ◽  
Vol 39 (4) ◽  
pp. 1565
Author(s):  
Fernanda Lúcia Passos Fukahori ◽  
Daniela Maria Bastos de Souza ◽  
Eduardo Alberto Tudury ◽  
George Chaves Jimenez ◽  
José Ferreira da Silva Neto ◽  
...  
Keyword(s):  
Thermal Emission ◽  
Low Cost ◽  
Joint Inflammation ◽  
Domestic Animals ◽  
The Body ◽  
Joint Diseases ◽  
Infrared Images ◽  
Infrared Thermometry ◽  
Non Invasive ◽  
Sensitivity Specificity

Joint diseases are relatively common in domestic animals, such as dogs. The involved inflammation produces thermal emission, which can be imaged using specific sensors that allow capturing of infrared images. Given that there have been few reports on the use of thermography in the diagnosis of inflammation associated with diseases of the hip joint in dogs, we here propose a method for identification of inflammatory foci in dogs by using infrared thermometry. The present study aimed to find non-invasive and low-cost resources that couldfacilitate a clinical diagnosis in cases withinflammation in the coxofemoral joint of dogs.To this end, we developed a system in whichthe Flir Systems TG165 thermograph is coupled to a black PVC cannula with a 30-cm focus-to-animal distance.External effects of the environment on the temperature of the animalswere compared with the body temperature as measured by a conventional thermometer.Thirty-one dogs with and without inflammation in the coxofemoral joint underwent clinical evaluation.We verified that the temperature registered by the thermograph inthe animals with joint inflammation was significantlydifferentfrom that incontrol animals without inflammation, in the lateral projection.The method showed a sensitivity of 80%, specificity of 87.5%, and accuracy of 83.87%. This standardized method of diagnosis of inflammatory foci in the coxofemoral articulation of dogs by way of thermography showed sensitivity, specificity, and satisfactory accuracy.

scholarly journals Aptamers for Detection and Diagnostics (ADD): Can mobile systems linked to biosensors support molecular diagnostics of SARS-CoV-2? Should molecular medicine explore multiple alternatives as adjuvants to or replacement for traditional and non-traditional vaccines?

2021 ◽  
Author(s):  
Shoumen Datta
Keyword(s):  
Data Sharing ◽  
Molecular Diagnostics ◽  
Low Cost ◽  
Mobile App ◽  
Mobile Systems ◽  
Molecular Medicine ◽  
Invasive Monitoring ◽  
Non Invasive ◽  
Secure Information ◽  
Biomedical Device

Proposed SARS-CoV-2 surveillance tool using a mobile app for non-invasive monitoring of humans and animals. <p>Engineering a biomedical device as a low-cost, non-invasive, detection, and diagnostic platform for surveillance of infections in humans, and animals. The system embraces the IoT <i>“digital by design”</i> metaphor by incorporating elements of connectivity, data sharing and (secure) information arbitrage. Using an array of aptamers to bind viral targets may help in detection, diagnostics, and potentially prevention in case of SARS-CoV-2. The ADD tool may become part of a broader platform approach.</p>

Sign in / Sign up

Export Citation Format

Share Document